Disk Operating System

Midterm – Lecture
http://terpconnect.umd.edu/~nsw/ench250/dost
utor.htm#1A
http://www.animatedsoftware.com/faqs/learndo
s.htm#help_command
 Lesson 1

Lesson Objectives:
 Differentiate Hardware and Software

 Define what is DOS?

 Enumerate the reason why we need to study

DOS
 Apply how to set data and time using prompt.

 Check and apply date time set up.

 Lesson 1
continuation
Lesson Objectives
 Create directory command

 Learn how to scroll through the directory listing.

 Apply how to pause a directory listing

 View a wide listing of files

 Enumerates other DOS Command

 Print a Directory Listing

 Check for a Single File

 Check for a group files

 List files with the same extension.

Difference between hardware and
software
There are two parts to a computer system:
the hardware and the software.
 Hardware refers to the physical
components of a computer. An example
of hardware components would be the
monitor, keyboard and mouse
 Software represents the programs which
contain a set of instructions written to
perform a certain task on the computer.
What is DOS?

 DOS stands for Disk Operating System.

DOS controls the computer’s hardware
and provides an environment for
programs to run. This system program
must always be present when working
with your computer.
Why You Need DOS

There are a variety of reasons why you need DOS. A

few of them are listed below to satisfy your curiosity.
1. DOS controls the flow of information between you
and the computer (translator).
2. DOS allows you to store information on your
computer.
3. DOS allows you to retrieve information stored on
your computer.
4. DOS interprets and translates the software you
have on your computer
Set the Date and Time

 Most computers on campus have an internal

clock that will automatically set the date and
time for you when you turn the computer on.
 However, if your computer does not have this
feature or your computer has two floppy
drives, you will need to do the following steps
to set the date and time.
Set the Date and Time
(cont)..
Directions:
1. Type the date like this: 1-15-97
2. Press the return key (enter key).
3. Type the time like this: 8:46
4. Press return.
5. Notice that the C:\> prompt will appear.
Set the Date and Time
(cont)..
 DOS marks the date and time on everything
you do. It is important to periodically check
the date and time if you have an internal
clock to see if it is correct. If you have a two
floppy system, it is important to enter the
correct date and time when you turn the
computer on.
 NOTE: Baynan sets the date and time for
you automatically when you Login.
Check the Date and Time

 DOS will let you check or change the date and time
once it has been set. The procedure to do this is as
follows:
Directions:
1. Type: date and press return.
2. If the correct date is displayed, simply press return.
If the date is incorrect, type the correct date and
press return.
3. Type: time and press return.
4. If the correct time is displayed, simply press return.
If the time is incorrect, type the correct time and
press return.
Directory Command

The DIRECTORY command is like a table of

contents in a book. This directory will list
the following information:
 Filenames

 File extensions

 Size of each file

 Date and time the file was last updated.

Directory Command (cont..)

 Directions:
 1. At the C:\> type: dir and press return.
 2. The list of files will scroll up and off the
screen.
 NOTE: At the end of the listing, there is a
line that shows the number of bytes free
on the hard drive.
Directory Command (cont..)

 Scroll Through the Directory Listing

 When you type the DIR command and press
return, the files begin to scroll vertically on your
screen. If you have a lot of files it is difficult to
read each one. By holding down the Control Key
(CTRL) and the letter S at the same time, you are
able to freeze the listing to view your files. When
you are finished, press the spacebar for the list
to continue.
 NOTE: You must return to the C:\> before
entering your next command.
Pause a Directory Listing

 You can add a PAUSE command to your directory

command which will allow you to view your directory
one screen at a time.
Directions:
1. Type: dir/p and press return.
2. The screen freezes after it fills the screen with the
files that are listed first in the directory.
3. Press the spacebar to continue listing you files.
4. Continue to press the spacebar until you return
back to the C:\> prompt.
View a Wide Listing of Files

 When you need to quickly view your files, you can

add a /W to the directory command. This will display
your files into five columns on the screen.
Directions:
1. Type: dir/w and press return.
2. DOS will list only the name of you file and the file
extension on the screen.
NOTE: Use this command when you are not
concerned with looking at the file size or the date it
was created.
Recall a DOS Command

 The F3 function key can be used to recall the last

DOS command you typed in. If you would like to
retrieve a previously entered command, you can
also press the up arrow key continuously until you
reach the desired command you were looking for.
 NOTE: You can also type out each letter in your last
command by using the right arrow key or the right
cursor key. After you use the F3 key to recall a
command, you can use the backspace key to edit
any part of the command or add to your command.
Print a Directory Listing

You can print a list of your files in your directory by

instructing DOS to send the information to your printer.
Directions:
1. Type: dir>prn and press return.
2. The > symbol stands for output. The PRN stands for
printer.
NOTE: You can print a wide listing of your files by typing
dir/w>prn
Laserjet printers and other sheetfeeder printers will not eject the
page after the dir>prn command. You must take the printer off-
line and press the form feed button. Remember to press the on-
line button when you are done in order to continue using the
printer.
Check for a Single File

 Instead of using the directory command to look for

one particular file, you can type the name of the file
after the DIR command at the C:\> prompt.
Directions:
1. Make sure that you are at your C:\> prompt.
2. Type: dir format.com (filename.extension) and
press return.
3. The screen will display a listing of the file or a file
not found message.
Check for a Group of Files

 The * symbol is referred to as a wildcard and stands

for any character or group of characters. This is
helpful when you want to list files that start with a
particular letter or group.
Directions:
1. Type: dir c* and press return.
2. All filenames that begin with the letter C will be
listed.
3. Press the F3 key.
4. Backspace twice and replace C* with A* and press
return.
5. All filenames that begin with the letter A are listed.
List Files with the Same Extensions

 You can also use the wildcard character * to look for

a group of files with the same extension.
Directions:
1. Type: dir *.bat and press return.
2. All files with the .bat extension are listed.
3. Press the F3 key.
4. Backspace three times and replace the .bat
extension with the .sys extension and press return.
5. All files with the .sys extension should now be
listed.
Clear the Screen

 When the screen get full of information, you

may want to clear it. To do this, type CLS at
the C:\> prompt and press return.
Create a File with DOS
Directions:
1. Type: copy con Sample1.ltr and press return.
2. Type this message in the following format:
PTC
Certificate in Computer Science
Good Foundation of Education
Hydie
3. Press the F6 function key (^Z) and press return.
4. DOS gives you a message that 1 File(s) has been
copied.
5. Type: dir q* and press return.
6. Now you can see the list of files beginning with the letter
Q.
NOTE: You can also use the COPY command to print a file
by typing: copy quick.ltr prn and press return.
Copy a File

 You can use the COPY command to copy one file to

another.
Directions:
1. Type: copy sample.ltr sample1.ltr and press
return.
2. DOS will tell you one file has been copied.
3. Type: dir S* and press return.
4. You should have two files listed with different
names.
NOTE: Filenames cannot be more than eight
characters in length. File extensions cannot be more
than three characters in length.
Copy a File with a New Extension

 You can also use the COPY command to

copy the file with a different filename
extension.
Directions:
1. Type: copy sample.ltr sample1.bac and
press return.
2. Type: dir q* and press return.
3. Three files should be listed.
Type a File with DOS

 If you need to check the contents of a particular file

or any DOS file, you will need to use the TYPE
command.
Directions:
1. Type: type sample1.ltr and press return.
2. DOS prints the contents of the file.
NOTE: Never use the TYPE command with files that
have the .com, .exe, .sys, and .bas extensions.
These are program files and will only display junk on
the screen.
Rename a File

 The RENAME command lets you rename a

previous file with a new name.
Directions:
1. Type: ren quick2.ltr sales.ltr and press
return.
2. Type: dir *.ltr and press return.
3. DOS lists only two files that have the .ltr
extension: sample.ltr and sample1.ltr.
Rename a Group of Files

 With the wildcard character *, you can also use the

RENAME command to change a group of files.
Directions:
1. Type: ren *.ltr *.bob and press return.
2. Type: dir *.bob and press return.
3. You should have two files listed with a .bob
extension.
4. Type: dir *.ltr and press return.
5. There should be no files found with .ltr extensions.
Rename a Group of Files(cont.)

 NOTE: You can also rename a group of files

that have the same name but different
extensions. Type the RENAME command
then the filename followed by the dot and the
wildcard, space and then type the new
filename followed by a dot and the wildcard
character. It will look like this: filename.*
newfilename.*
Hands-On Exercises

1. Practice how to set Time and Date using

DOS prompt.
2. Practice how to use DIR prompt to display
different types of files.
3. Create a files using three filename with
extension name of ltr.
4. After you practice all the command in the
DOS command, I’l go one by one to ask and
test if you able to comprehend my lecture
and that will be your hands-on exercises.
Thanks for Listening
Operating System (CS 421)
Practice now.

Not everything that can be counted counts,

and not everything that counts can be counted.

Albert Einstein