Scribd
Upload
211 views9 pages

Bearing Selection: How Will Select Bearings From Manufacturer Catalogue?

The document provides steps for selecting bearings from a manufacturer's catalogue: 1. Calculate the radial and axial loads on the bearing. 2. Determine the shaft diameter. 3. Select a bearing size suitable for the application based on load, speed, and space. 4. Find the basic static rating from the catalogue and calculate load ratios. 5. Use load ratios to find radial and thrust factors, then calculate the equivalent dynamic load and approximate bearing life.

Uploaded by

Sagar Pandit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
211 views9 pages

Bearing Selection: How Will Select Bearings From Manufacturer Catalogue?

The document provides steps for selecting bearings from a manufacturer's catalogue: 1. Calculate the radial and axial loads on the bearing. 2. Determine the shaft diameter. 3. Select a bearing size suitable for the application based on load, speed, and space. 4. Find the basic static rating from the catalogue and calculate load ratios. 5. Use load ratios to find radial and thrust factors, then calculate the equivalent dynamic load and approximate bearing life.

Uploaded by

Sagar Pandit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Bearing selection

How will select bearings from


manufacturer catalogue?
• The following steps must be adopted in the
selection of bearings
• 1.Calculate the radial and axial load reaction
(Fa and Fr) acting on the bearing
• 2.Decide the diameter of the shaft on which
the bearing is to be mounted
• 3.Select the proper size of bearing suitable for
given application
• 4.Find the basic static rating Co of the selected
bearing from the catalogue
• 5.Calculate the ratio (Fa/VFr) and (Fa/Co)
• 6.Find the value of X and Y i.e radial and thrust
factor from catalogue
• 7.Find the value of aplication factor ‘Ka’ from
the catalogue
• 8.Calculate the equivalent dyanamic factor
using realation,Pe=(XVFa+Yfa)Ka
• 9.Calculate the approximate bearing life in
hours from the type of the bearing
• 10.calculate the required basic dyanamic
capacity from the bearing by using relation ,
• L10=(C/Pe)
Bearing
• Defination:
• Bearings are used as mechanical component
to transfer the power and to move a certain
part ,and this is done by utilizing the small
fricion force of the bearings
Classification of Bearings
• Bearings are classified into two major groups
namely,Sliding bearings and Rolling bearings
• Bearing can also classified as Ball bearings and
Roller bearings
Types of bearings
• Published on Mechanical Engg Diploma Notes and Videos
• (http://mechdiploma.com)
• Home > (ii) How will select bearing from manufacturer catalogue?
• (ii) How will select bearing from manufacturer catalogue?
• Question:
• (ii) How will select bearing from manufacturer catalogue?
• Answer:
• The following steps must be adopted in selecting the bearing
• from the manufacturer’s catalogue: 1. Calculate the radial and
• axial load reaction (Fa and Fr) acting on the bearing. 2. Decide
• the diameter of the shaft on which the bearing is to be mounted.
• 3. Select the proper size of bearing suitable for given application,
• specified with speed and available space. 4. Find the basic static
• rating Co of the selected bearing from the catalogue. 5. Calculate
• the ratio (Fa / VFr) and (Fa / Co). 6. Find the value of x and y i. e.
• radial and thrust factor from the catalogue. These values depend
• upon (Fa / VFr) and (Fa / Co).
• 7. Find the value of load factor or application factor ‘Ka‘from the
• catalogue. 8. Calculate the equivalent dynamic load by using
• relation, Pe = (XVFa + YFa ) Ka 9. Calculate the approximate
• bearing life in hours from the type of bearing, operation and type
• of machinery that depends upon application. 10. Calculate the
• required basic dynamic capacity for the bearing by using
• relation, L10 = (C / Pe ) a or
Process

You might also like