Laser Beam Welding

LASER BEAM WELDING
SUBMITTED TO: SUBMITTED BY:

Ms. Dipali Pandya Mihir patel(16103358)
Assistant Professor Ravi patel(16103360)
Mechanical Engineering, SET
What IS Laser Beam?
 The term laser is an acronym for Light Amplification by Stimulated
Emission of Radiation.
 A laser beam is a powerful, narrow, monochromatic and directional
beam of electromagnetic radiation.
 Often, these beams are within the visible spectrum of light.
 A laser device excites the atoms in a losing medium. The electrons
of these atoms move to a higher orbit, then release photons,
creating a laser beam.
Properties of Laser Beam
 A LASER beam is highly intense in nature.

 LASER beam is having strictly monochromatic.
 LASER light is highly powerful and capable of propagating over long
distance & are not easily absorbed by water.
 LASER beam is also said to be highly directional.
 This beam is coherent with the wave train in phase with each other
Types of laser Beam
Types of lasers include gas, liquid and solid.

1. Gas lasers excite the electrons in gases, such as helium, neon,
cadmium, carbon dioxide and nitrogen.
2. Liquid lasers include the dye laser, which uses organic dye
molecules in liquid form to produce a wavelength of radiation that
can be tuned.
3. Solid lasers include the ruby laser, which uses a precious stone to
produce a beam of red light.
Laser beam welding process
 In general cases heat is required to fuse the metals for any types of
welding, in laser beam welding process the heat is obtained from the
application of a concentrated coherent light beam which striking
upon the weld metal and melt the metal, such this weld joint is
obtained, this welding process is called laser welding.
Working Principle Figure
Schematic diagram of LBW
 The electrical energy is converted into light energy, this is worked by
flash tube.
 The capacitor is provided for storage the electrical energy and
supply the high voltage to flash tube for performed appropriately.
 The electrical energy discharged from capacitor and xenon
transform the high energy into white flash light rate of 1/1000 per
second.
 The chromium atoms of Ruby Crystal are excited and pumped into
high energy. Due to heat generating the some of this energy is lost.
But some light energy reflected mirror to mirror and again chromium
atoms are excited until loss their extra energy simultaneously to form
a narrow beam of coherent light. Which is come out through the
one end tiny hole of crystal’s mirror.
 This narrow beam is focused by a optical focusing lens to produce a
small intense of laser on the job.
Parameters of LBW
1. Medium Normal atmosphere

2. Tool High power laser beam
3. Critical parameters Beam intensity, beam dia, Temp
4. Material application All material (metal and non metal)
LBW Process Advantages:
 Works with high alloy metals without difficulty

 Can be used in open air
 Can be transmitted over long distances with a minimal loss of power
 Narrow heat affected zone
 Low total thermal input
 Welds dissimilar metals
 No filler metals necessary
Advantages
 No secondary finishing necessary

 Extremely accurate
 Produces deep and narrow welds
 Low distortion in welds
 High quality welds
 Can weld small, thin components
 No contact with materials
Limitations
 Rapid cooling rate may cause cracking in some metals

 High capital cost for equipment
 Optical surfaces of the laser are easily damaged
 High maintenance costs
 The maximum joint thickness that can be welded by laser beam is
somewhat limited. Thus weld penetrations of larger than 19 mms are
difficult to weld.
 Low welding speed
Applications
 Electronic, Automotive & food processing

 Spot welds
 Vacuum components are welded easily
 Carbon steels & ferrous materials are welded
 Ideal for automation & robotics
 Used to weld IC to plates
 In aircraft industry to weld light gauge marerials
 Cu, Ni, Al, Se, W, Ti, Zr, Ta colunium etc.
 Wire to wire, sheet to sheet, tube to sheet& small diameter stud welds.
Thank you

Laser Beam Welding

Uploaded by

Copyright:

Available Formats

Laser Beam Welding

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Laser Beam Welding

Uploaded by

Copyright:

Available Formats

LASER BEAM WELDING

SUBMITTED TO: SUBMITTED BY:

 A LASER beam is highly intense in nature.

Types of lasers include gas, liquid and solid.

1. Medium Normal atmosphere

 Works with high alloy metals without difficulty

 No secondary finishing necessary

 Rapid cooling rate may cause cracking in some metals

 Electronic, Automotive & food processing

You might also like