Scribd
Upload
53 views32 pages

CPDS Tutorial 1

Chemical process simulation aims to represent chemical transformations through mathematical models of mass and energy balances, phase equilibria, and transport equations. Process simulators are used to model steady state behavior by determining pressures, temperatures, and flows, and can be used for equipment sizing, cost estimation, properties estimation, operability analysis, and process optimization. Thermodynamic models include equations of state and activity coefficient models for estimating properties of pure components and mixtures. Process simulation is a useful tool for chemical engineers, allowing for process design, optimization of operating conditions, increasing yields and efficiency, and improving process controllability and teaching. An example tutorial presented involves simulating cyclohexane production via benzene hydrogenation in Aspen HYSYS.

Uploaded by

MuhammadTanzeeLUsman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
53 views32 pages

CPDS Tutorial 1

Chemical process simulation aims to represent chemical transformations through mathematical models of mass and energy balances, phase equilibria, and transport equations. Process simulators are used to model steady state behavior by determining pressures, temperatures, and flows, and can be used for equipment sizing, cost estimation, properties estimation, operability analysis, and process optimization. Thermodynamic models include equations of state and activity coefficient models for estimating properties of pure components and mixtures. Process simulation is a useful tool for chemical engineers, allowing for process design, optimization of operating conditions, increasing yields and efficiency, and improving process controllability and teaching. An example tutorial presented involves simulating cyclohexane production via benzene hydrogenation in Aspen HYSYS.

Uploaded by

MuhammadTanzeeLUsman
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 32

Chemical Process Design and Simulation

 Introduction:

 Chemical process simulation aims to represent a process of chemical or physical transformation through a mathematic
model that involves the calculation of mass and energy balances coupled with phase equilibrium and with transport
and chemical kinetics equations.
 Mathematical model applied contains linear, non-linear & differential algebraic equations which represent equipment,
or process operations, physical-chemical properties, connections b/w equipment or process operations & their
specification.
 PFD is language of chemical process.
 Simulators are used for interpretation, analysis of information contained in PFD to foresee the failures and evaluate
process performance.
 Chemical Process Simulators:

 Process simulators used for modeling behavior of chemical process in steady state, by determination of pressures,
temperatures and flows.
 Nowadays, also used to perform equipment sizing, cost estimation, properties estimation and analysis, operability
analysis and process optimization.
 Process simulators allow;
a) Predict the behavior of a process.
b) Analyze in a simultaneous way different cases, changing the values of main operating variables.
c) Optimize the operating conditions of new or existing plants.
d) Track a chemical plant during its whole useful life, in order to foresee extensions for process improvements.
 Thermodynamic & Property Model:

 A thermodynamic model is set of equations permitting the estimation of pure component mixtures and properties.
 Four main groups of thermodynamic models available;
a) Ideal Model
b) Equations of State
i. Redlich-Kwong (RK)
ii. Soave–Redlich–Kwong (SRK)
iii. Peng–Robinson
c) Activity Coefficients Model
i. Van Laar Model
ii. Wilson Model
iii. NRTL (Nonrandom Two Liquids)
iv. UNIQUAC
v. UNIFAC
d) Special Methods
 Applications of Process Simulators:

 It is a tool for process & chemical engineers used for applications of repetitive tasks or activities of high complexity
that should be solved within short time.
 Various applications of process simulations founded are the result of necessity of;
a) Making a better use of the energy resources.
b) Minimizing the operating costs and the emission of waste streams that may be contaminant.
c) Increasing the yield and process efficiency.
d) Improving the process controllability.
e) Propelling the teaching of process design.
 Tutorial#01: Cyclohexane Production via. Benzene Hydrogenation

 Background/Problem

Construct an Aspen HYSYS simulation to model the production of cyclohexane via benzene hydrogenation. The simplified
flowsheet for this process is shown below. Fresh benzene and hydrogen feed streams are first fed through a heater to bring
the streams up to reactor feed temperature and pressure conditions. This feed mixture is then sent to a fixed-bed catalytic
reactor where 3 hydrogen molecules react with 1 benzene molecule to form cyclohexane. This simulation will use a
conversion reactor block to model this reaction. The reactor effluent stream is then sent to a flash tank to separate the light
and heavy components of the mixture. The vapor stream coming off the flash tank is recycled back to the feed mixture after
a small purge stream is removed to prevent impurities from building up in the system. The majority of the liquid stream
leaving the flash tank goes to a distillation column to purify the cyclohexane product, while a small portion of the liquid
stream is recycled back to the feed mixture to minimize losses of benzene.

You might also like