Scribd
Upload
792 views12 pages

Multi Tester

The multi-tester, also known as a multimeter, is an instrument that can measure voltage, resistance, and current. It has two types, analog and digital. The multi-tester is the best tool for measuring these electrical values. It is important to read the manual to properly operate the multi-tester, select the correct range for the measurement, check battery condition, and store it carefully.

Uploaded by

dora reklamadora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
792 views12 pages

Multi Tester

The multi-tester, also known as a multimeter, is an instrument that can measure voltage, resistance, and current. It has two types, analog and digital. The multi-tester is the best tool for measuring these electrical values. It is important to read the manual to properly operate the multi-tester, select the correct range for the measurement, check battery condition, and store it carefully.

Uploaded by

dora reklamadora
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 12

THE MULTITESTER

PREPARED BY: RONAIDA D. LUMAMBAS


Multi-tester or multimeter
- sometimes called the VOM (voltmeter,
ohmmeter, milliammeter). It is the best
instrument that can measure voltage,
resistance and current. It is generally
made of two types: the analog and the
digital.
PARTS OF A
MULTI- TESTER
Proper care and maintenance of
the multi tester
1. Read manual of instructions
on how to operate the multi-
tester.

2. In reading the amount of


voltage, always start with the
highest range to avoid reading
voltage higher than the tester
setting.
3. Be sure that the tester is set to the correct
range setting: resistance range when
measuring the ohm, voltage range when
measuring voltage and ammeter range when
measuring the value of electric current.

4. Always check the condition of its battery.


Worn out batteries will damage the internal
setting of the tester.
5. When the tester is not in
used or will be stored, set
the selector switch to
1000V or to OFF position.

6. Never drop the tester.

You might also like