Scribd
Upload
97 views1 page

Do Not Online or Update To FW 6.20!! SX Os Not Support Yet!! Make Sure You Backup Nand in Memory To Your PC!

1. Do not update the Switch firmware to version 6.20 as SX OS may not be supported yet. 2. Make sure to back up the Switch's NAND memory to a PC. 3. The document provides instructions for booting the Switch in either SX PRO CFW or OFW mode using either auto or manual methods.

Uploaded by

pancaeka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
97 views1 page

Do Not Online or Update To FW 6.20!! SX Os Not Support Yet!! Make Sure You Backup Nand in Memory To Your PC!

1. Do not update the Switch firmware to version 6.20 as SX OS may not be supported yet. 2. Make sure to back up the Switch's NAND memory to a PC. 3. The document provides instructions for booting the Switch in either SX PRO CFW or OFW mode using either auto or manual methods.

Uploaded by

pancaeka
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 1

DO NOT ONLINE OR UPDATE TO FW 6.20!!

SX OS NOT SUPPORT YET!!


MAKE SURE YOU BACKUP NAND IN MEMORY TO YOUR PC!

SX PRO CFW MODE Auto Boot SX PRO CFW MODE Manual Boot
1. Plug the Dongle to Tab Switch (Press the 1. Turn the power off
Power Button if not on yet and make sure the 2. Install the Jig to the rail on the right where
dongle indicator light in on – charge it if it is Joycon is to be installed
off) 3. Plug the dongle to the Tab Switch
2. Enter the Menu Album 4. Press Volume Up and Power buttons
3. Choose the game you wish to play simultaneously to enter CFW Mode (make sure
4. Start Game (Skip all update game message, that the dongle indicator light in on – charge it if
UPDATE GAME will install NSP!!) it is off)
5. Enter the Menu Album
SX PRO OFW MODE Auto Boot 6. Choose the game you wish to play
1. Plug the Dongle to Tab Switch (Press the 7. Start Game (Skip all update game message,
Power Button if not on yet and make sure the UPDATE GAME will install NSP!!)
dongle indicator light in on – charge it if it is
off)
2. Press and hold Power Button and Volume SX PRO OFW MODE Manual Boot
Up Button 1. Simply press the Power button
3. Enter Original Firmware/Boot Original Manual boot save battery usage and not power drain
Firmware when turned off
Manual boot simply power button
BOOT TIDAK BOROS Baterai dan bikin DRAIN saat
TURN OFF + Manual BOOT BISA TEKAN TOMBOL

You might also like