Scribd
Upload
59 views8 pages

GSM Based Home Automation: M.Tech (ECE) BY Aadil Rashid Bhat

This document describes a GSM-based home automation system created by Aadil Rashid Bhat for his M.Tech degree from Desh Bhagat University in Punjab. The system uses an Arduino Uno and GSM module to allow a user to control home appliances like lights and switches remotely by sending text messages with keywords to the GSM module. It provides steps for the system structure, block and circuit diagrams, and concludes the project provides a smart, efficient, and easy-to-use way to remotely control home appliances and save energy.

Uploaded by

Aafan Shahid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
59 views8 pages

GSM Based Home Automation: M.Tech (ECE) BY Aadil Rashid Bhat

This document describes a GSM-based home automation system created by Aadil Rashid Bhat for his M.Tech degree from Desh Bhagat University in Punjab. The system uses an Arduino Uno and GSM module to allow a user to control home appliances like lights and switches remotely by sending text messages with keywords to the GSM module. It provides steps for the system structure, block and circuit diagrams, and concludes the project provides a smart, efficient, and easy-to-use way to remotely control home appliances and save energy.

Uploaded by

Aafan Shahid
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 8

GSM BASED HOME

AUTOMATION

M.TECH
(ECE)

BY

Aadil Rashid Bhat

DESH BHAGAT UNIVERSITY


PUNJAB
STRUCTURE

The structure of the ‘GSM Based Home


Automation’ we made is shown in these
steps,

The GSM module receives and acknowledges


the message containing keyword sent by the
user.

Arduino Uno compares the keywords in the


message with the desired keyword.

If the received keyword matches the desired


keyword then the Arduino acknowledges it
and send HIGH signal to the relay.

If the received keyword doesn’t match with


the desired keyword then the whole
operation stops there.
Fig 1:- GSM Based Home Automation
DIAGRAMS

Fig 2: - Block diagram of the system


Fig 3: - Circuit diagram of the system
Fig 4: - User is sending “sw1_on/sw2_on” command to SIM
card attached to the GSM modem
Fig 5: - The bulb connected to the switch 2 has been turned
on
CONCLUSIONS
The main purpose of the project is to provide a smart and
efficient way to control our home appliances with the help of modern
communication technology. With the combination of Arduino and GSM
this project is not only a modern approach to next generation home
but also a very friendly and easy to use system. This project will give our
daily life a new dimension at the same time it will help us to save energy

You might also like