Scribd
Upload
181 views

Keywords

The document describes the permanent magnet moving coil (PMMC) instrument. It operates using a coil that moves between the poles of a permanent magnet, experiencing a force due to the magnetic field. The coil is attached to a pointer that deflects based on the current. Controlling and damping torques from springs and eddy currents ensure the pointer stabilizes on the scale. Key advantages are low power use and high accuracy, while disadvantages include only working on DC and delicate construction. Temperature effects, spring aging, and magnet aging can cause errors.

Uploaded by

Singam Sridhar
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
181 views

Keywords

The document describes the permanent magnet moving coil (PMMC) instrument. It operates using a coil that moves between the poles of a permanent magnet, experiencing a force due to the magnetic field. The coil is attached to a pointer that deflects based on the current. Controlling and damping torques from springs and eddy currents ensure the pointer stabilizes on the scale. Key advantages are low power use and high accuracy, while disadvantages include only working on DC and delicate construction. Temperature effects, spring aging, and magnet aging can cause errors.

Uploaded by

Singam Sridhar
Copyright
© © All Rights Reserved
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 19

PMMC Instrument

Definition:

The instruments which use the permanent


magnet for creating the stationary magnetic
field between which the coil movesis known
as the permanent magnet moving coil or
PMMC instrument.
Principle
• When a current carrying conductor is placed in a magnetic field, it
experiences a force and tends to move in the direction as per
Fleming’s left-hand rule.

Fleming left-hand rule:

• If the first and the second finger and the thumb of the left hand are
held so that they are at right angle to each other, then the thumb
shows the direction of the force on the conductor, the first finger
points towards the direction of the magnetic field and the second
finger shows the direction of the current in the wire.
Controlling Torque
• This torque is produced by the spring action and opposes the
deflection torque so as the pointer can come to rest at the point
where these two torques are equal (Td= Tc).

• The controlling torque in PMMC Instruments is provided by two


control spring mounted on the jewel bearing. Theses control springs
are phosphor bronze hair spring either helical or spiral, coiled in
opposite direction. Control Spring also serves to lead current in and
out of the moving coil.

• The controlling torque is directly proportional to the angle of


deflection of the coil.

• Control torque Tc =Kθ where, θ = deflection angle in radians and K


= spring constant Nm /rad .
Damping
• Damping is caused by the eddy current set up in the
aluminum coil which prevents the oscillation of the
coil.

• This torque ensures the pointer comes to an


equilibrium position i.e. at rest in the scale without
oscillating to give an accurate reading.

• In PMMC as the coil moves in the magnetic field,


eddy current sets up in a metal former or core on
which the coil is wound or in the circuit of the coil
itself which opposes the motion of the coil resulting
in the slow swing of a pointer and then come to rest
quickly with very little oscillation.
construction
• A coil of thin wire is mounted on an aluminum frame
(spindle) positioned between the poles of a U shaped
permanent magnet which is made up of magnetic
alloys like alnico.
• The coil is pivoted on the jeweled bearing and thus the
coil is free to rotate. The current is fed to the coil
through spiral springs which are two in numbers. The
coil which carries a current, which is to be measured,
moves in a strong magnetic field produced by a
permanent magnet and a pointer is attached to the
spindle which shows the measured value.
working
• When a current flow through the coil, it
generates a magnetic field which is
proportional to the current in case of an
ammeter. The deflecting torque is produced
by the electromagnetic action of the current
in the coil and the magnetic field.
Pointer and Scale
• The pointer is carried by the spindle and moves over a
graduated scale. The pointer is of light weight construction
and has a section over the scale twisted to form a fine
blade.

• This helps in reducing the Parallax Error in reading the


scale. In many instruments this parallax error can be
further reduced by careful alignment of pointer blade and
its reflection in the mirror adjacent to scale
Derivation of
Torque
Advantages and Disadvantages
Advantages
• The PMMC consumes less power and has great accuracy.
• It has a uniformly divided scale and can cover an arc of 270 degrees.
• The PMMC has a high torque to weight ratio.
• It can be modified as ammeter or voltmeter with suitable resistance.
• It has efficient damping characteristics and is not affected by stray magnetic field.
• It produces no losses due to hysteresis.

Disadvantage
• The moving coil instrument can only be used on D.C supply as the reversal of current
produces a reversal of torque on the coil.
• It’s very delicate and sometimes uses AC circuit with a rectifier.
• It’s costly as compared to moving coil iron instruments.
• It may show an error due to loss of magnetism of permanent magnet.
Cause for errors in PMMC
• Temperature effect: Error in the reading of the PMMC may cause due to
change in the temperature which will affect the resistance of the moving coil.
The temperature coefficients of the value of the coefficient of copper wire in
moving coil are 0.04 per degree Celsius rise in temperature. Since the coil has
a lower temperature coefficient, it will have a faster rate of temperature rises
which will result in increase in the resistance causing an error

• Spring material and age: The other factor which may lead to error in the
PMMC reading is the quality and contortion of the spring. Old aging spring will
not allow the pointer to show the correct reading making an error.

• Ageing of Magnet: Along with the age, the effect of heat and vibration will
reduce the magnetic effect of the permanent magnet which will produce an
error in the reading.
Permanent magnets
• Permanent magnets are made of special alloys such as :
• Aluminum-Nickel-Cobalt (Alnico)
• Strontium-Iron
• Neodymium-Iron-Boron
• Samarium-Cobalt.
• Alcomax

You might also like