Instructor Materials Chapter 8: Network Troubleshooting: CCNA Routing and Switching Connecting Networks

Instructor Materials
Chapter 8: Network
Troubleshooting
CCNA Routing and Switching

Connecting Networks
Presentation_ID © 2008 Cisco Systems, Inc. All rights reserved. Cisco Confidential 1
Chapter 8: Best Practices
Prior to teaching Chapter 8, the instructor should:
 Complete Chapter 8 Assessment.
 This chapter has many troubleshooting activities that the
student should complete. Some are listed as optional.
However, if any of your students are planning to take the
CCNA exam, they should complete all the activities.
 Review the Network Evolution chapter.
Chapter 8: Network
Troubleshooting
Connecting Networks
Chapter 8 - Sections & Objectives
 8.1 Troubleshooting Methodology
• Explain troubleshooting approaches for various network problems.
 8.2 Troubleshooting Scenarios

• Troubleshoot end-to-end connectivity in a small to medium-sized
business network, using a systematic approach.
8.1 Troubleshooting Methodology
Troubleshooting Methodology
Network Documentation
 Documentation is
critical to being able
to monitor and
troubleshoot a
network.
 Documentation
includes:
• Configuration files,
including network
configuration files and
end-system
configuration files
• Physical and logical
topology diagrams
• A baseline performance
levels
 To establish and capture an initial network baseline, perform the
following steps:
• Step 1. Determine what types of data to collect.
• Step 2. Identify devices and ports of interest.
• Step 3. Determine the baseline duration.
 Common Cisco IOS
commands used for data
collection.
 Manual collection of data
should be reserved for
smaller networks or
limited to mission-critical
network devices.
 Sophisticated network
management software is
typically used to baseline
large and complex
networks.
Troubleshooting Process
Troubleshooting Process
 Common Cisco IOS commands used to gather the symptoms
of a network problem.
Isolating the Issue Using Layered Models
 After gathering symptoms,

the network administrator
compares the
characteristics of the
problem to the logical
layers of the network to
isolate and solve the
issue.
Isolating the Issue Using Layered Models
 Using the layered

models, there are three
primary methods for
troubleshooting
networks:
• Bottom-up
• Top-down
• Divide-and-conquer
8.2 Troubleshooting Scenarios
Troubleshooting Scenarios
Using IP SLA
 Cisco IP Service Level Agreements (SLA) generate traffic to
measure network performance.
 Additional benefits include:
• SLA monitoring, measurement, and verification
• Measure the jitter, latency, or packet loss in the network
• IP service network health assessment
• Edge-to-edge network availability
Using IP SLA
IP SLA ICMP Echo Configuration
Using IP SLA
Verifying IP SLA Configuration
Troubleshooting Tools
 Common software troubleshooting tools include:
• Network Management System Tools include device-level monitoring, configuration, and
fault-management tools. These tools can be used to investigate and correct network
problems.
• Knowledge Bases from device vendors, combined with Internet search engines like
Google, are used by network administrators to access a vast pool of experience-based
information.
• Tools & Resources at http://www.cisco.com provide information on Cisco-related
hardware and software.
• Baselining Tools can draw network diagrams, help keep network software and hardware
documentation up-to-date, and help to cost-effectively measure baseline network
bandwidth use.
• Protocol Analyzers are useful to investigate packet content while flowing through the
network.
Troubleshooting Tools
 Common hardware troubleshooting
tools include:
• Digital Multimeters are test instruments that
are used to directly measure electrical values
of voltage, current, and resistance.
• Cable Testers are specialized, handheld
devices designed for testing the various
types of data communication cabling. These
devices send signals along the cable and
wait for them to be reflected. The time
between sending the signal and receiving it
back is converted into a distance
measurement.
• Cable Analyzers are multifunctional
handheld devices that are used to test and
certify copper and fiber cables for different
services and standards.
• Portable Network Analyzers can be
plugged in anywhere in the network and
used for troubleshooting.
• Network Analysis Module can capture and
decode packets and track response times to
pinpoint an application problem to a
particular network or server.
Symptoms and Causes of Network Troubleshooting
Physical Layer Troubleshooting
Data Link Layer Troubleshooting
Network Layer Troubleshooting
Transport Layer Troubleshooting
Application Layer Troubleshooting
Troubleshooting IP Connectivity
 Common bottom-up
troubleshooting steps for end-to-
end connectivity:
• Step 1. Check physical connectivity
• Step 2. Check for duplex
mismatches.
• Step 3. Check data link and
network layer addressing.
• Step 4. Verify that the default
gateway is correct.
• Step 5. Ensure that devices are
determining the correct path from
the source to the destination.
• Step 6. Verify the transport layer is
functioning properly.
• Step 7. Verify that there are no
ACLs blocking traffic.
• Step 8. Ensure that DNS settings
are correct.
8.3 Chapter Summary
Chapter Summary
Summary
 For network administrators to be able to monitor and troubleshoot a network,
they must have a complete set of accurate and current network
documentation, including configuration files, physical and logical topology
diagrams, and a baseline performance level.
 The three major stages to troubleshooting problems are gather symptoms,
isolate the problem, then correct the problem.
 The OSI model or the TCP/IP model can be applied to a network problem. A
network administrator can use the bottom-up method, the top-down method,
or the divide-and-conquer method.
 Common software tools that can help with troubleshooting include network
management system tools, knowledge bases, baselining tools, host-based
protocol analyzers, and Cisco IOS EPC.
 Hardware troubleshooting tools include a NAM, digital multimeters, cable
testers, cable analyzers, and portable network analyzers. Cisco IOS log
information can also be used to identify potential problems.
 There are characteristic physical layer, data link layer, network layer,
transport layer, and application layer symptoms and problems of which the
network administrator should be aware. The administrator may need to pay
particular attention to physical connectivity, default gateways, MAC address
tables, NAT, and routing information.

Instructor Materials Chapter 8: Network Troubleshooting: CCNA Routing and Switching Connecting Networks

Uploaded by

Copyright:

Available Formats

Instructor Materials Chapter 8: Network Troubleshooting: CCNA Routing and Switching Connecting Networks

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Instructor Materials Chapter 8: Network Troubleshooting: CCNA Routing and Switching Connecting Networks

Uploaded by

Copyright:

Available Formats

Instructor Materials

CCNA Routing and Switching

 8.2 Troubleshooting Scenarios

 After gathering symptoms,

 Using the layered

You might also like