Repairing The Electronic Devices: Laica Olvida Nichaela Jane D. Terrible
Repairing The Electronic Devices: Laica Olvida Nichaela Jane D. Terrible
ELECTRONIC DEVICES
LAICA OLVIDA
NICHAELA JANE D. TERRIBLE
ELECTRICAL IRON
PROBLEM
• One of the most common
troubles with dry irons is iron
not heating enough. The causes
for this could be wrong
thermostat setting, problem
with electric connections,
problem with the power switch
SOLUTION
• Thus to resolve this problem, you first need to
check if you have made all the connections properly
and in accordance with the user manual. Check the
power switch, the plug and the thermostat as well.
• The thermostat is that element of an iron which
helps control the temperature and the mode
• So make sure you turn it to a reasonably higher
setting. Moreover, try changing the heating mode to
see whether the heat increases.
VIDEO
ELECTRICFAN
• ROTOR STATOR
• It is the movable part of the
electrical motor that rotates It is a non movable part of the electric
motor that provides electro magnetic
energy to the rotor
Aluminum wiring
PROBLEM
• has a high danger level as aluminum was
used as a cheap substitute for copper in
earlier days and is no longer a safe option.
This is because corrosion takes place when
aluminum is in contact with copper and
when the connections loosen, it leads to
fires.
SOLUTION
• The solution for this issue is retrofitting a dielectric wire nut for aluminum wire
to copper connection in case of light fixtures. This helps in stopping corrosion
due to the grease in the nuts.
VIDEO
ADPATER