Scribd
Upload
124 views

OFC (Optical Fiber Cable) : For Circulation To Trainees Only

This document provides an overview of optical fiber cables (OFC). It discusses the advantages of optical fiber communication over copper including higher speeds, larger bandwidth, and greater resistance to electromagnetic interference. It describes the basic components and transmission sequence in an OFC system. The document also covers the different types of optical fibers based on material and refractive index profile, as well as single mode versus multimode fibers. Additionally, it discusses challenges like attenuation and dispersion and how they limit transmission distances and data rates. Finally, it briefly outlines test instruments used for OFC and potential alignment issues at fiber splices.

Uploaded by

Laxmi Kosta
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
124 views

OFC (Optical Fiber Cable) : For Circulation To Trainees Only

This document provides an overview of optical fiber cables (OFC). It discusses the advantages of optical fiber communication over copper including higher speeds, larger bandwidth, and greater resistance to electromagnetic interference. It describes the basic components and transmission sequence in an OFC system. The document also covers the different types of optical fibers based on material and refractive index profile, as well as single mode versus multimode fibers. Additionally, it discusses challenges like attenuation and dispersion and how they limit transmission distances and data rates. Finally, it briefly outlines test instruments used for OFC and potential alignment issues at fiber splices.

Uploaded by

Laxmi Kosta
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 31

OFC

(Optical Fiber Cable)

For circulation to Trainees only


Agenda

• Why Optical Fiber?


• Applications of Optical Fiber
• Transmission Sequence
• Geometry of Fiber
• Principle of Propagation of Light
• Types of Optical Fiber
• Transmission Challenges

For circulation to Trainees only


For circulation to Trainees only
• History of Telecommunication
• Radio Signal ------Copper -----Radio Signal

• Frequency of Operation

For circulation to Trainees only


• Channel Performance
• S/N Ratio
• Bit Error rate

For circulation to Trainees only


• Light as a Carrier
- Low loss Medium
- Sources and detectors.

For circulation to Trainees only


• Carrier
- Amplitude
- Frequency variation
- Spectral Width

For circulation to Trainees only


• Copper communication
• Coaxial communication
• Microwave
• Satellite
• Optical

For circulation to Trainees only


Why Fiber ?
• Need for Fiber Optics technology is constantly increasing
– Driven by increasing data rates
– Declining implementation cost
• Many advantages
– SPEED: Fiber optic networks operate at high speeds
- up to the Terabits per seconds
– BANDWIDTH: large carrying capacity
– RESISTANCE: Greater resistance to electromagnetic
noise such as radios, motors or other nearby cables.
– MAINTENANCE: Fiber optic cables costs much less
to maintain
– Low signal attenuation
– Highly Secured
For circulation to Trainees only
APPLICATIONS OF OPTICAL FIBER

1. LONG DISTANCE COMMUNICATION BACKBONES


2. INTER-EXCHANGE JUNCTIONS
3. VIDEO TRANSMISSION
4. BROADBAND SERVICES
5. COMPUTER DATA COMMUNICATION (LAN, WAN etc..)
6. HIGH EMI AREAS
7. NON-COMMUNICATION APPLICATIONS (sensors
etc…)

For circulation to Trainees only


Transmission Sequence

Transmitter
Input Coder or Light Source-to-Fiber
Signal Converter Source Interface

Fiber-optic Cable

Fiber-to-light Light Amplifier/Shaper Output


Interface Detector Decoder
Receiver

For circulation to Trainees only


Transmission sequence

• Information is encoded into electrical signals.


• Electrical signals are converted into light signals.
• Light travels down the fibre.
• A detector changes the light signals into electrical
signals.
• Electrical signals are decoded into information

For circulation to Trainees only


Geometry of Fiber

For circulation to Trainees only


Geometry of Fiber Cable

Consist of two concentric layers of high-purity silica


glass the core and the cladding
The light stays confined to the core because the
cladding has a lower refractive index—a measure of
its ability to bend light.
For circulation to Trainees only
Principle of Propagation of light

For circulation to Trainees only


Principle of Propagation of light

• Light propagates due to


total internal reflection
• Light > critical angle
will be confined to the
core
• Light < critical angle
will be lost in the
cladding
For circulation to Trainees only
Types of Fiber
According to Material Used
1. Plastic Fiber
2. Plastic Clad Silica Fiber
3. Glass Fiber
According to RI Profile
1. Step Index
2. Graded Index
According to Modes
1. Single Mode
2. Multi-Mode
For circulation to Trainees only
Types of Fiber

For circulation to Trainees only


Types of Fiber

Optical Multi-mode vs. Single-mode Fiber

For circulation to Trainees only


Transmission Challenges

• Attenuation
– Loss of light power as the signal travels
through optical cable
• Dispersion
– Spreading of signal pulses as they travel
through optical cable
• Non Linear Effects

For circulation to Trainees only


Attenuation Vs. Wavelength

For circulation to Trainees only


Wavelength Windows

For circulation to Trainees only


Dispersion

For circulation to Trainees only


Limitations From Dispersion
• Dispersion causes pulse distortion, pulse "smearing"
effects
• Higher bit-rates and shorter pulses are less robust to
Chromatic Dispersion
• Limits "how fast“ and “how far”
10 Gbps
t
60 Km SMF-28

40 Gbps
4 Km SMF-28 t

For circulation to Trainees only


Types of OFC

• Loose Buffer
– The loose buffer uses a hard plastic tube having an
inside diameter several times that of the fibre.
– One or more fibres lie within the buffer tube.
– The fibre in the tube is slightly longer than the tube
itself.
– Thus the cable can expand and contract without
stressing the fibres.

For circulation to Trainees only


Types of OFC

• Tight Buffer
– The tight buffer has a plastic directly applied over the
coating.
– It is more flexible and allows tighter turn radius.
– It is useful for indoor applications where temperature
variations are minimum and
– It is having ability to make tight turns inside walls is
desired.

For circulation to Trainees only


Type of Outdoor OFC

For circulation to Trainees only


TEST AND MEASUREMENT INSTRUMENTS

OTDR

SPLICING MACHINE
OPTICAL TALK SETS

POWER METER,
LASER SOURCE,
MECHANICAL SPLICE ATTENUATOR
TOOL KIT

For circulation to Trainees only


Fiber Alignment Impairments

Axial displacement Gap displacement

Angular displacement Imperfect surface finish

For circulation to Trainees only


Optical Fibre Cables

For circulation to Trainees only


Thank you!

For circulation to Trainees only

You might also like