Scribd
Upload
72 views9 pages

Rewa Engineering College: Department of Electronics and Communication

The document describes Binary Phase Shift Keying (BPSK), a digital modulation technique. BPSK uses two phases, 0 degrees and 180 degrees, to represent binary digits 0 and 1. At the transmitter, the carrier signal is switched between these two phases depending on the input bit being encoded. At the receiver, the phase of the received signal is measured to detect the transmitted bits. BPSK allows for higher data rates than techniques like ASK but is more complex to implement.

Uploaded by

Aman Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
72 views9 pages

Rewa Engineering College: Department of Electronics and Communication

The document describes Binary Phase Shift Keying (BPSK), a digital modulation technique. BPSK uses two phases, 0 degrees and 180 degrees, to represent binary digits 0 and 1. At the transmitter, the carrier signal is switched between these two phases depending on the input bit being encoded. At the receiver, the phase of the received signal is measured to detect the transmitted bits. BPSK allows for higher data rates than techniques like ASK but is more complex to implement.

Uploaded by

Aman Singh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 9

REWA ENGINEERING COLLEGE

A
DIGITAL COMMUNICATION
PRESENTATION ON
PHASE SHIFT KEYING (PSK)
{BINARY PHASE SHIFT KEYING (BPSK)}
BY- AMAN SINGH
EN. ROLL NO. 0301EC161005
DEPARTMENT OF ELECTRONICS AND COMMUNICATION
PHASE SHIFT KEYING (PSK)

Phase Shift Keying (PSK) is the digital modulation technique in which the
phase of the carrier signal is changed by varying the sine and cosine inputs
at a particular time.
PSK technique is widely used for wireless LANs, bio-metric, contactless
operations, along with RFID and Bluetooth communications
BINARY PHASE SHIFT KEYING (BPSK)

 The simplest PSK technique is called binary phase-shift keying (BPSK).

 It uses two opposite signal phases (0 and 180 degrees). The digital signal is broken
up timewise into individual bits (binary digits). The state of each bit is determined
according to the state of the preceding bit.

 It is a two phase modulation scheme, where the 0’s and 1’s in a binary message are
represented by two different phase states in the carrier signal: θ=0∘ for binary 1 and
θ=180∘ for binary 0
 If the phase of the wave does not change, then the signal state stays the same
(0 or 1).

 If the phase of the wave changes by 180 degrees that is, if the phase reverses,
then the signal state changes (from 0 to 1, or from 1 to 0).

 Because there are two possible wave phases, BPSK is sometimes called
Biphase modulation.

 Modulation is achieved by varying the phase of the sinusoid depending on the


message bits. Therefore, within a bit duration Tb, the two different phase states of
the carrier signal are represented as
GRAPH
BLOCK DIAGRAM OF TRANSMITTER AND RECEIVER
ADVANTAGES

• It has less error then Ask


• More efficient use of band width (higher data rate) are possible.
DISADVANTAGES

More complex detection process than ASK & FSK


Rapid amplitude change between symbols due to phase discontinuity.

You might also like