USTER AFIS PRO 2

In Uster Afis Pro 2, any material in the form of bale, mat, sliver or roving can be tested on
the, repeatedly and reliably. Blends can be tested up to a ratio of 50% cotton: 50% synthetic.

FEATURES

• Basic measurements of the NC Module include the amount of cotton fiber and seed
coat neps.

• L&M Module measures fiber length and short fiber content, plus cotton maturity and
immature fiber content.
• Trash Module measures the trash and dust content in cotton

• Histogram Reports show the distribution of each fiber property compared to its size
group, visualizing the impact of a process on the fiber material..

5
DIGI VISION MICROSCOPE

FEATURES

• Latest design computer interfaced projection microscope for fiber & yarn analysis.
• With maximum resolution of 1500X magnification

• Photos of all fibers longitudinal & cross-sectional view are loaded in software to
identify the fibers without prior knowledge in the same.

• Various type of measurement like length, area, count of any fine textile fiber can be
done.

6
USTER TESTER 5-C800 (UT5)

• Evenness %, Thick & thin places, neps are measured

• Analysis of VL-Curves, Spectrogram.

• With the special sensor technology, periodic or nearly periodic mass variations caused
by defective rotating machine parts (such as gears from the spinning pump) can be
detected with the spectrogram.
• Operated at speeds up to 800 m/min with continuous adjustability

7
 (UT5)

DIGITAL YARN TENSION METER

PRINCIPLE
• Digital yarn tension meter has a specially designed electronic sensor which is
capable of sensing tension in the moving yarn very accurately.

8
 • This sensor converts the tension read by the sensing probe into the equivalent
electrical signal. This signal is processed through the micro-controller and the yarn
tension is displayed digitally in grams.

FEATURES

• Capacity 0 to 200gms, accuracy 1gm.

• Portable & handy can be carried anywhere.

• Smooth precision-engineered mechanism

• Latest model with sophisticated design

USTER TENSOJET 4 FEATURES

9
 • The high performance installation USTER TENSOJET 4 can carry out fully automatic
measurements with up to 30'000 tests - which means 24 km of yarn - per hour.
• Spectrogram allows identification of periodic faults.

• Fully automatic check of the whole measurement.

USTER TENSORAPID 4

10
FEATURES

• USTER TENSORAPID 4 supplies all standard test values of tensile testing and provides
in-depth analysis of yarn quality.
• Smart and easy operation

Customized solutions to eliminate routine tasks

1
1
FABRIC TESTING INSTRUMENTS

DIGITAL BURSTING STRENGTH TESTER

FEATURES

• Fully automatic digital model

• It is used to find the bursting strength of the fabric.

• It is used for all type of fabrics, specially geo-textile fabrics.

• It is fully computerized instruments.

12
DIGITAL ELMENDORF TEAR TESTER

The Digital Elmendorf Tear Tester is a microprocessor controlled instrument for determining the
internal tearing resistance of paper and board. The instrument features a digital display and
enhanced accuracy.

FEATURES

• Pneumatic clamping of sample

• Pneumatic pendulum release

• Internal microprocessor for calibration, calculations, and data presentation.

• Digital selection of number of plies torn allows for single ply testing

13
DIGITAL MINI-MARTINDALE

It is a fabric abrasion resistance tester with digital display.

FEATURES

• The mini-martindale has a powerful drive system to overcome the high levels of
friction, which are generated, when rubbing, for example, rubber gloves against glass
paper.

• Higher speeds for accelerated testing.

• Suitable for wet testing

• Ideal for tests generating high levels of friction

• Sample thickness up to 20mm

• Additional loading up to 1.4kg DIGITAL MINI-MARTINDALE

It is a fabric abrasion resistance tester with digital display.

FEATURES

o The mini-martindale has a powerful drive system to overcome the high levels of

friction, which are generated, when rubbing, for example, rubber gloves against
glass paper.
o Higher speeds for accelerated testing.

14
 o Suitable for wet testing o Ideal for
tests generating high levels of friction o
Sample thickness up to 20mm

DIGITAL AIR PERMEABILITY TESTER PRINCIPLE

• The principle of the digital air permeability tester is that air is drawn through a
specified area of fabric, which is adjustable to suit specific textiles being
evaluated.
APPLICATIONS

• Textile Fabrics

• Blankets

• Knitted or layered fabrics

• Non-woven airbag fabrics

• Napped fabrics

• Pile fabrics

FEATURES

• Digital operation

• Quick and simple process

• Useful for quality control

15
 Precise, repeatable tests

USTER FABRISCAN

• USTER FABRISCAN provides with an automatic consistently objective and reproducible

• At a speed up to 120 meters per minute, dependent on the fabric characteristics, Fabriscan
is capable to detect flaws and defects as small as 0.3 mm.
• Automatic fault reporting and fault marking.

• Non-disturbing deviation versus defects.

16
 i

USTER FABRISCAN ON-LOOM

• USTER FABRISCAN ON-LOOM integrated fabric inspection system inspects every

• Detecting fabric defects immediately as they occur, enabling early intervention -

MULTI PURPOSE TESTING INSTRUMENTS

UNIVERSAL TESTING MACHINES

The Universal Testing Machines are designed for a wide range of testing procedures
including: bending (folding), compression, tensile testing, peeling / adherence, shear test, friction
coefficient, tear, penetration and extraction, de-lamination, indentation and many more

17
FEATURES

• Force Measurement: through interchangeable Load cells

• Force Indication/ Display: through the video monitor

• Measurement Precision: better than 0.5% of reading

• Speed Accuracy: 1%

• Position Accuracy/Repeatability: 0.002mm

• Humidity: 10-90% RH

18