Scribd Logo
Upload

Welcome to Scribd!

  • 130 views

    Pile Load Test

    Uploaded by

    Alhaz Uddin
    The document summarizes a pile load test conducted on a Franki pile at the Dasherkandi Sewage Treatment Plant project. The objectives of the test were to determine the pile's load carrying capacity and settlement under different loads. The test followed ASTM standards and involved applying increasing loads to the pile to generate load-settlement curves from which the ultimate load value and safe working load could be established. Key results from testing this pile are presented graphically.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    Pile Load Test

    Uploaded by

    Alhaz Uddin
    130 views10 pages
    The document summarizes a pile load test conducted on a Franki pile at the Dasherkandi Sewage Treatment Plant project. The objectives of the test were to determine the pile's load carrying capacity and settlement under different loads. The test followed ASTM standards and involved applying increasing loads to the pile to generate load-settlement curves from which the ultimate load value and safe working load could be established. Key results from testing this pile are presented graphically.

    Original Description:

    Pile load test method

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes a pile load test conducted on a Franki pile at the Dasherkandi Sewage Treatment Plant project. The objectives of the test were to determine the pile's load carrying capacity and settlement under different loads. The test followed ASTM standards and involved applying increasing loads to the pile to generate load-settlement curves from which the ultimate load value and safe working load could be established. Key results from testing this pile are presented graphically.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    130 views10 pages

    Pile Load Test

    Uploaded by

    Alhaz Uddin
    The document summarizes a pile load test conducted on a Franki pile at the Dasherkandi Sewage Treatment Plant project. The objectives of the test were to determine the pile's load carrying capacity and settlement under different loads. The test followed ASTM standards and involved applying increasing loads to the pile to generate load-settlement curves from which the ultimate load value and safe working load could be established. Key results from testing this pile are presented graphically.

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 10

    Dasherkandi Sewage Treatment

    Plant (500MLD) Project

    Pile Load Test

    Presented by:
    Engr. Muraduddoula,QC Manager, DSTP Project
    Objective

    • This test is used to determine the “ Load Carrying Capacity”


    of a pile

    • This test gives us the value of


    Ultimate Load Value

    Safe Load Value

    Settlement under different values of load


    Types of Test for Single Pile

    • Vertical static load test


    Axial Compression test (ASTM D1143)

    Axial Tensile test (ASTM D3689)

    • Lateral load test (ASTM D3966)

    • High strain dynamic test (ASTM D4945)

    • Low strain Impact Integrity test (ASTM 5882)


    Axial Compression test on Franki Pile
    • Purpose of test
    Determine the settlement under working load
    Determine the ultimate bearing capacity

    • Equipment
    Hydraulic Jack
    Hydraulic pump
    Dial gauge
    Reference beam
    Test beam
    Etc.
    Axial Compression test on Franki Pile
    • Test procedure (ASTM D1143)
     Pile test shall be carried out after 4 weeks (BNBC-2006)
     Maintain Load (ML) test method shall be used
     After completing pile test set-up increase load up to 2
    times of working load (BNBC-2006).
    Working load=1000kN; Test load =2000kN
     If settlement more than 10% of pile diameter, consider
    it is fail (BS EN 1997-1:2004)
     Unloading the test load according to ASTM D1143
    procedure
    Result of Franki Pile Test
    The pile test result are computed to obtain
    the graphical relation between,
    • Time vs Load curve
    • Time vs Settlement curve
    • Load vs Settlement curve
    For any load settlement can be calculated by

    You might also like