Moshell Commands

Moshell (Basic command)
1. momt ( 전체 MO Tree 파악하기 ) 22. get . ipaddress , get . vid (IP Address 및 VLAN ID 확인 )
2. moshell 169.254.1.10 , lt all (RBS 접속 ) 23. cabr , caba ( 장애발생시 확인 )
3. cvcu, cvls, cvset, cvrm, cvmk (cv 관련 ) 24. cabx , lhsh BXP_3_1 fui get vswr ( VSWR 확인 )
4. acc 0 manualrestart (Restart RBS ) 25. cabx , lhsh BXP_0_1 warpA read DL_PM_PA0_C0 ( 실재 출력 확인 )
5. st mme , st fdd , get mme ipaddress ( MME, cell 상태 ) 26. get . Power ( 출력 타겟 확인하기 )
6. st cell , bl , deb ( Cell Block, Unblock ) 27. pr security ( Security 확인 )
7. pr AntennaUnit , lpr RfBranch, stde , st riport ( RU 점검 ) 28. get systemc ( System constant : customer 공개금지 )
8. diff (Compare MO) 29. get . nooftx , noofrx ( ANT나 전송 모드 선택 )
9. al , ala , alt ( Alarm Check ) 30. pr anr ( ANR 설정 )
10. lga , lgx, lg ( alarm log 등 log 보기 ) 31. license server , get . fingerprint (License 관리 )
11. get . tac ( tac 확인 ) 32. acc IpAccessHostEt ping (ping 확인 )
12. get . earfcn ( Center 주파수 확인 ) 33. Statistics DATA
13. get . band ( 주파수 Bandwidth 확인 ) 34. get . inac , set Rcs=1 tInactivityTimer ( Inactivity timer )
14. get . feature ( Feature 확인 ) 35. get upgr stat, pr upgrade ( Upgrade 확인 )
15. inv ( license State 확인 )
16. get sync ( Clock 상태 확인 )
17. get . ntp NTP (동기 서버 ) 확인
18. get 1 , readclock ( 시간 확인 )
19. ue print -admitted ( 몇 call 결렸는지 확인 )
20. appsh oper , appsh data <{udp|gtp}> <sid> (bearer 정보 )
21. get extemal , get term , get point , get . relation (Handover 확인)
Understand the entire MO Tree
ENB03> momt
110328-16:10:46 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/2764
--------------------------------
MO classes under ManagedElement
--------------------------------
ENodeBFunction[1] (systemCreated)
AdmissionControl[1] (systemCreated)
AirIfLoadProfile[0-24]
AnrFunction[1] (systemCreated)
AnrFunctionEUtran[1] (systemCreated)
AnrFunctionGeran[1] (systemCreated)
AnrFunctionUtran[1] (systemCreated)
Cdma2000Network[0-1]
Cdma2000FreqBand[0-18]
Cdma2000Freq[0-64]
ExternalCdma2000Cell[0-64]
EUtraNetwork[1] (systemCreated)
EUtranFrequency[0-24]
ExternalENodeBFunction[0-256]
ExternalEUtranCellFDD[0-24]
ExternalEUtranCellTDD[0-24]
TermPointToENB[0-1]
EUtranCellFDD[0-24]
Cdma2000FreqBandRelation[0-32]
Cdma2000CellRelation[0-64] RU
Cdma2000FreqRelation[0-64]
EUtranFreqRelation[0-8]
EUtranCellRelation[0-64]
GeranFreqGroupRelation[0-16]
GeranCellRelation[0-64]
UeMeasControl[1] (systemCreated)
PmUeMeasControl[0-1]
ReportConfigA1Prim[1] (systemCreated) DU
ReportConfigA1Sec[1] (systemCreated)
ReportConfigA5[1] (systemCreated)
ReportConfigA5Anr[1] (systemCreated)
ReportConfigB2Cdma2000[1] (systemCreated)
ReportConfigB2Geran[1] (systemCreated)
ReportConfigB2Utra[1] (systemCreated)
ReportConfigEUtraBadCovPrim[1] (systemCreated)
ReportConfigEUtraBadCovSec[1] (systemCreated)
ReportConfigEUtraBestCell[1] (systemCreated)
ReportConfigEUtraBestCellAnr[1] (systemCreated)
ReportConfigEUtraIntraFreqPm[0-2]
UtranFreqRelation[0-16]
UtranCellRelation[0-64]
EUtranCellTDD[0-24]
Connect to RBS
[~]$ moshell 169.254.1.10
####################################################################
# Welcome to MoShell 8.0r #
# Finn Magnusson, Jan Pettersson #
# http://utran01.au.ao.ericsson.se/moshell #
# Contact: [email protected] #
# [email protected] #
####################################################################
Checking ip contact...OK
HELP MENU :h 1. Have laptop setting same as left.

BASIC MO COMMANDS : m
OTHER MO COMMANDS : n 2. Enter moshell 169.254.1.10 for connection.
OTHER COMMANDS :o 3. Enter lt all
PM COMMANDS :p
QUIT :q
169.254.1.10> lt all
110323-21:50:44 169.254.1.10 8.0r stopfile=/tmp/2920

Checking MOM version...ERBS_NODE_MODEL_B_1_40
Using MOM version: ERBS_NODE_MODEL_B_1_40_COMPLETE
Parsing MOM (cached): /home/Administrator/moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz .....................................................Done.
Using paramfile /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt
Parsing file /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt ............................................................................Done.
Fetching IOR file...Done.
Connecting to 10.0.0.165:56834 (CorbaSecurity=OFF, corba_class=2, java=1.6.0_23, jacoms=R73D19, jacorb=R73D01)
**** Welcome to the Simple Mo Browser (version 3.0)!
Trying file=C:/cygwin/home/Administrator/moshell_logfiles/logs_moshell/tempfiles/20110323-215038_1808/ior1808
**** Test Construction OK
****
$mobrowser_pid = 3436
Connected to 169.254.1.10 (SubNetwork=ONRM_ROOT_MO_R,SubNetwork=TEST,MeContext=ENB04,ManagedElement=1)

Last MO: 1043. Loaded 1043 MOs. Total: 1044 MOs.
ENB04>
1. The above is a access method when you connect directly to LNB PORT in the station.
2. In case of access through LSM, use (10.0.0.163)
CV
※ What is CV ?
Similar to system restoration point of Windows.
ENB02> cvcu
It has all Parameter and Version information for rollback
110326-10:42:02 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/896 to the previous status promptly in case of failure to
reduce no service time. ( Maximum number of CVs
=================================================================================================== stored in each station is 50.)
110326-10:42 CV Name Upgrade Package Release
===================================================================================================
Startable: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2) CV type: Manual rollback point (Made by user)
Loaded: RU_SW_Change_R25S-alarmc_cdmaHOcell33 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2) Installation rollback point (Automatically
Executing: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Last created: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
created during upgrade)
------------------------------------------------------------------------------------------------------------------- System rollback point (Automatically
Current UpgradePkg: UpgradePackage=R9AS CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2) created by system)
AutoCreatedCV: Disabled
Countdown status: Deactivated
Ongoing CV activity: 0 (IDLE) Startable : Display CV activated at the time of reset
Rollback status: Rollback is off
=================================================================================================
Loaded :
Executing : Display CV currently in operation
ENB02> cvls Last created : Display CV created most recently
==================================================================================================
110326-10:42 CV Name Upgrade Package Release
==================================================================================================
Startable: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Loaded: RU_SW_Change_R25S-alarmc_cdmaHOcell33 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Executing: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
Last created: selfconfig_autocreated1 CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
-------------------------------------------------------------------------------------------------------------------
Current UpgradePkg: UpgradePackage=R9AS CXP102051/12_R9AS L11B (LSV59.3-4-CPP_8.0.2)
AutoCreatedCV: Disabled
Countdown status: Deactivated
1. Current CV check: cvcu
Ongoing CV activity: 0 (IDLE) 2. Entire CV check: cvls
Rollback status: Rollback is off 3. CV change: cvset ( Select certain CV among saved
===================================================================================================
UP name ProductData CVs LMs PrDate LastCV state Release CompatIndex 4. CV creation: cvmk
=================================================================================================== 5. CV deletion: cvrm
InitialUP 0_0 0 00 IDLE, ONLY_DELETEABLE
Virtual_2_of_CXP102051/10_R5EA CXP102051/10_R5EA 0 0 100906 IDLE, ONLY_DELETEABLE L11A 6. CV creation & startable change: cvms
Virtual_0_of_CXP102051/12_R8AA CXP102051/12_R8AA 1 0 110216 110314 IDLE, ONLY_DELETEABLE L11B 7. reset: acc 0 manualrestart <┛
Virtual_1_of_CXP102051/12_R7AK CXP102051/12_R7AK 4 0 110203 110315 IDLE, ONLY_DELETEABLE L11B (LSV59.3-3-CPP_8.0.2)
R9BE%2 CXP102051/10_R9BE/2 29 192 101207 110323 IDLE, UPGRADE_COMPLETED L11A.0.1.0 (EP30-CPP_8.0.0.3) CXP102051%1-R4
y <┛
R9AS CXP102051/12_R9AS 16 200 110303 110325 IDLE, UPGRADE_COMPLETED L11B (LSV59.3-4-CPP_8.0.2) CXP102051%1-R4 3 <┛
================================================================================================== 0 <┛
CV Name Creation Date UpgradePackage Release Type Operator Comment
================================================================================================== 0 <┛
BasicCV_CXP102106%10_R9BE%2 2010-12-07 13:28 CXP102051/10_R9BE/2 L11A.0.1.0 other unknown none 6. pol 5 5 <┛
LTE_Initial 2010-12-07 13:33 CXP102051/10_R9BE/2 L11A.0.1.0 other ProductionTest ProductionTest
L11A-artiza-vlanoff 2011-03-01 02:26 CXP102051/10_R9BE/2 L11A.0.1.0 other cwcho none
===================================================================================================
>>> Total: 50 CV's, 6 UP's
ENB03>
Restart RBS
ENB03> acc 0 manualrestart
110323-22:33:17 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/3644 1. acc 0 manualrestart
The node has been restarted on a different CV: from OptimizedUDPDL2 to selfconfig_autocreated2. 2. y
Rereading MOM and MIB...
3. 3
Last MO: 835. Loaded 835 MOs. Total: 836 MOs.
4. 0
Checking MOM version...ERBS_NODE_MODEL_B_1_40 5. 0
Using MOM version: ERBS_NODE_MODEL_B_1_40_COMPLETE
Parsing MOM (cached): /home/Administrator/moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz ....................................................Done.
Parsing file /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt ...........................................................................Done. pol 5 5
Call Action manualrestart on following 1 MOs ?
===================================================================================
0 ManagedElement=1 Use it when you want to know
INFO: The RBS node ENB03 will be restarted on CV: selfconfig_autocreated2
===================================================================================
when the signal resumes after
Call action manualrestart on 1 MOs. Are you Sure [y/n] ? y disconnection.
================================================================================================================
Proxy MO Action Nr of Params
================================================================================================================
0 ManagedElement=1 manualRestart 3
Parameter 1 of 3, restartRank (enumRef-RestartRank):

Enter one of the following integers: 0:RESTART_WARM, 1:RESTART_REFRESH, 2:RESTART_COLD, 3:RESTART_COLDWTEST: 3
Parameter 2 of 3, restartReason (enumRef-RestartReason):

Enter one of the following integers: 0:PLANNED_RECONFIGURATION, 1:UNPLANNED_NODE_EXTERNAL_PROBLEMS, 2:UNPLANNED_NODE_UPGRADE_PROBLEMS, 3:UNPL
ANNED_O_AND_M_ISSUE, 4:UNPLANNED_CYCLIC_RECOVERY, 5:UNPLANNED_LOCKED_RESOURCES, 6:UNPLANNED_COLD_WITH_HW_TEST,
7:UNPLANNED_CALL_PROCESSING_DEGRA DATION, 8:UNPLANNED_LOW_COVERAGE, 30:UPGRADE_BOARD_RESTART: 0
Parameter 3 of 3, restartInfo (string): 0

>>> Return value = null
===============================================================================================================
Total: 1 MOs attempted, 1 MOs actioned
169.254.1.10> polu 5 5
ENB03>
110331-12:35:07 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_30_COMPLETE
pol 5: interval 5: wait time stopfile=/tmp/2168
ENB03> pol 5 5
110323-22:33:35 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/3644 Waiting 5 seconds before starting to poll...
Waiting 5 seconds before starting to poll... No ongoing activity on the UpgradePackage MOs.
No contact to port 80, retrying in 1 second...
No contact to port 80, retrying in 1 second... 169.254.1.10> pol 5 5
No contact to port 80, retrying in 1 second...
CORBA.OBJECT_NOT_EXIST Polling for 0m41s, MO service not ready, retrying in 5 seconds...
110331-12:35:25 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_30_COMPLETE
CORBA.OBJECT_NOT_EXIST Polling for 0m51s, MO service not ready, retrying in 5 seconds... stopfile=/tmp/2168
MO service is ready. Waiting 5 seconds before starting to poll...
MO service is ready.
ENB03>
169.254.1.10>
MME , CELL Status
eNB3> lst mme To check MME status
110310-16:38:07 10.0.0.164 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/4728

===================================================================================
Proxy Adm State Op. State MO MME IP modification method (From
===================================================================================
536 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,TermPointToMme=LGERMME01
station side)
===================================================================================
Total: 1 MOs ENB03> get mme ip
Check CELL status ENB03> bl mme
eNB3> lst fdd Same command lst cell ENB03> set mme ipAddress1 100.100.100.150
110328-15:19:52 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/3796 ENB03> deb mme
===================================================================================
Proxy Adm State Op. State MO ENB03> lst mme
===================================================================================
854 1 (UNLOCKED) 1 (ENABLED) ENodeBFunction=1,EUtranCellFDD=33
879 0 (LOCKED) 0 (DISABLED) ENodeBFunction=1,EUtranCellFDD=32
===================================================================================
Total: 3 MOs
eNB3> st sector
===================================================================================
Proxy Adm State Op. State MO
===================================================================================
1030 1 (UNLOCKED) 0 (DISABLED) SectorEquipmentFunction=S1
1031 1 (UNLOCKED) 0 (DISABLED) SectorEquipmentFunction=S2
1036 1 (UNLOCKED) 1 (ENABLED) SectorEquipmentFunction=S3
===================================================================================
Total: 3 MOs
eNB3> get mme ipaddress

=================================================================================================================
MO Attribute Value
=================================================================================================================
TermPointToMme=LGERMME01 ipAddress1 4.2.0.132
TermPointToMme=LGERMME01 usedIpAddress 4.2.0.132
=================================================================================================================
Total: 1 MOs
MME Node addition method

cr ENodeBFunction=1,TermPointToMme=LGERMME02
lget ENodeBFunction=1,TermPointToMme=LGERMME02
lset ENodeBFunction=1,TermPointToMme=LGERMME02 ipAddress1 xxx.xxx.xxx.xxx
deb LGERMME02
Block, Unblock
ENB03> st cell Check Cell status.

===================================================================================
===================================================================================
147 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=bb-1,CellDeviceSet=1
===================================================================================
Unblock Cell no. 32, currently
ENB03> deb 879
blocked.
Deblock following 1 MOs ?
===================================================================================
879 ENodeBFunction=1,EUtranCellFDD=32
===================================================================================
Deblock 1 MOs. Are you Sure [y/n] ? y
====================================================================================
Id MO administrativeState Result
====================================================================================
879 EUtranCellFDD=32 1 >>> Set.
====================================================================================
Total: 1 MOs attempted, 1 MOs set
ENB03> bl 879
Block Cell no. 32, currently
unblocked.
Block following 1 MOs ?
===================================================================================
879 ENodeBFunction=1,EUtranCellFDD=32
===================================================================================
Block 1 MOs. Are you Sure [y/n] ? y
RU Check
ENB03> lk fdd eNB3> lh ru vii

=============================================================================== 110331-15:41:29 169.254.1.10 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/
Proxy Adm State Op. State MOs linked to 476:EUtranCellFDD=31 Please enter Node Password:
===============================================================================
476 1 (UNLOCKED) 0 (DISABLED) EUtranCellFDD=31
Checking available boards on node...
477 EUtranCellFDD=31,UeMeasControl=1
480 EUtranCellFDD=31,UeMeasControl=1,ReportConfigEUtraBestCell=1
479 EUtranCellFDD=31,UeMeasControl=1,ReportConfigEUtraBadCovSec=1 ...
478 EUtranCellFDD=31,UeMeasControl=1,ReportConfigEUtraBadCovPrim=1 Created following board-groups: all, allp, mp, bp, tu, coremp, ommp, scb, sxb, scx, sccpmp
492 1 (UNLOCKED) 0 (DISABLED) SectorEquipmentFunction=S1 , et, etmfg, etmfx, aal2ap, aal2ncc, aal2cpsrc, aal2rh, xp, rax, tx,gcpu.
147 AntennaUnitGroup=1,RfBranch=1 >>> Type "bp" to view available board-groups and "bp <group>" to view group contents.
149 AntennaUnitGroup=1,RfBranch=2 ============================================================
123 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,RiPort=DATA_1
$ lhsh BXP_0_1 vii
131 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,RiPort=DATA_2
143 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,RiPort=DATA_1 BXP_0_1: Indicated states:
135 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,RiPort=DATA_2 BXP_0_1: Red:
126 1 (UNLOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=A BXP_0_1: Default (off)
130 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=B BXP_0_1: Green:
138 1 (UNLOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=A BXP_0_1: Default (steady light)
141 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=B BXP_0_1: Yellow:
127 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=RXA_IO
BXP_0_1: Default (off)
125 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru,RfPort=RXB_IO
140 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=RXA_IO ===========================================================
142 0 (LOCKED) 0 (DISABLED) RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru,RfPort=RXB_IO $ lhsh BXP_3_1 vii
=============================================================================== BXP_3_1: Indicated states:
Total: 20 MOs BXP_3_1: Red:
BXP_3_1: Default (off)
eNB3> st aux
BXP_3_1: Green:
110331-15:40:14 169.254.1.10 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/2392 BXP_3_1: Default (steady light)
=============================================================================== BXP_3_1: Yellow:
Proxy Adm State Op. State MO BXP_3_1: Default (off)
===============================================================================
$
122 1 (UNLOCKED) 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1
===============================================================================
Total: 2 MOs
eNB3> st ru
===============================================================================
===============================================================================
63 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,GeneralProcessorUnit=1
124 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=1,AuxPlugInUnit=RU-1-1,DeviceGroup=ru
136 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=2,AuxPlugInUnit=RU-1-2,DeviceGroup=ru
===============================================================================
Total: 5 MOs
RU Check
ENB03> st de

===================================================================================
===================================================================================
119 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,DeviceGroup=dul
146 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=bb-1
147 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=bb-1,CellDeviceSet=1
160 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=du-1
161 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,SubDeviceGroup=du-1,RicmDeviceSet=1
211 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru
213 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,TrDeviceSet=tr
===================================================================================
Total: 17 MOs
ENB03> st riport

===================================================================================
===================================================================================
126 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=B
127 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=C
136 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=E
139 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
142 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
157 1 (ENABLED) Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,RiPort=F
209 1 (ENABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_1
210 0 (DISABLED) Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,RiPort=DATA_2
===================================================================================
Total: 18 MOs
RU Check AntennaUnitGroup MO
ENB03> pr AntennaUnit
===================================================================================
Proxy MO
===================================================================================
184 Equipment=1,AntennaUnitGroup=1
187 Equipment=1,AntennaUnitGroup=1,AntennaUnit=1
===================================================================================
Total: 6 Mos
ENB03> pr rfport
===================================================================================
Proxy MO
===================================================================================
212 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=RXB_IO
215 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=B
216 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=A
217 Equipment=1,RbsSubrack=1,RbsSlot=5,AuxPlugInUnit=RU-1-5,DeviceGroup=ru,RfPort=RXA_IO
===================================================================================
Total: 24 Mos
ENB03> pr branch
===================================================================================
Proxy MO
===================================================================================
185 Equipment=1,AntennaUnitGroup=1,RfBranch=2
===================================================================================
Total: 6 MOs
Compare MO
ENB03> st fdd

===================================================================================
===================================================================================
===================================================================================
Total: 3 MOs
ENB03> diff 854 879
=====================================================================================================
MO EUtranCellFDD=33 EUtranCellFDD=32
=====================================================================================================
redirectionInfoRefPrio1 Cdma2000Network=1,Cdma2000FreqBand=1,Cdma2000Freq=400
sectorFunctionRef SectorEquipmentFunction=S3 SectorEquipmentFunction=S2
mappingInfo.mappingInfo SIB8 1 (MAPPED_SI_1) 0 (NOT_MAPPED)
EUtranCellFDDId 33 32
administrativeState 1 (UNLOCKED) 0 (LOCKED)
availabilityStatus 0 (NO_STATUS) 8 (OFF_LINE)
noOfUsedTxAntennas 1 -1
operationalState 1 (ENABLED) 0 (DISABLED)
physicalLayerCellIdGroup 11 10
cellId 33 32
physicalLayerSubCellId 0 2
=====================================================================================================
Check Alarm
ENB02> al
Brief check of Alarm al
Resolving the alarm service in OMS...
Simple Alarm Client initialized...
Starting to retrieve active alarms
Nr of active alarms are: 9
================================================================================================
Sever Specific Problem Cause Mo-Reference
================================================================================================
Maj Disconnected equipment_malfunction HwUnit=SCU
Maj ResourceAllocationFailure configuration_or_customizing_error EUtranCellFDD=21
Maj TU Synch Reference Loss of Signal loss_of_signal Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
Min Emergency Unlock of Software Licensing alarm_indication_signal Licensing=1
Min HwFault equipment_malfunction Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
Min HwFault equipment_malfunction Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
Min Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
>>> Total: 9 Alarms (0 Critical, 5 Major)
Detailed check of Alarm ala
ENB02> ala Check Alarm by the hour alt
Resolving the alarm service in OMS...
Simple Alarm Client initialized...
Starting to retrieve active alarms
Nr of active alarms are: 9
================================================================================================
Sever Specific Problem Cause Mo-Reference
================================================================================================
Maj Disconnected equipment_malfunction HwUnit=SCU
Maj TU Synch Reference Loss of Signal loss_of_signal Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
Min Emergency Unlock of Software Licensing alarm_indication_signal Licensing=1
Min HwFault equipment_malfunction Subrack=1,Slot=1,PlugInUnit=1,RiPort=A
Min HwFault equipment_malfunction Subrack=1,Slot=1,PlugInUnit=1,RiPort=D
Min Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
Alarm Id : SubNetwork=ONRM_ROOT_MO_R,SubNetwork=TEST,MeContext=ENB02_4
Event Time : 2011. 3. 10 $ 9:51:13
Perceived Severity : Major
Check log
ENB03> lga

Please enter Node Password:
Startdate=19661031.231320, Enddate=20110329.074624
....................Get /c/logfiles/alarm_event/ALARM_LOG.xml /home/Administrator/moshell_logfiles/logs_moshell/tempfiles/20110328-161024_2612/alarmLog2
764.xml ... OK
=======================================================================================================
Timestamp (UTC) S Problem Cause MO-reference
=======================================================================================================
2011-03-28 01:53:03 AL m Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
2011-03-28 02:42:20 AL * Synch Reference Not Reliable clock_synchronisation_problem Synchronization=1
2011-03-28 02:42:20 AL * Loss of Synch Reference Redundancy replaceable_unit_problem Synchronization=1
2011-03-28 05:52:58 AL M ServiceUnavailable underlying_resource_unavailable EUtranCellFDD=31
2011-03-28 05:53:37 AL * ServiceUnavailable underlying_resource_unavailable EUtranCellFDD=31
2011-03-28 06:23:23 AL M TU Synch Reference Loss of Signal loss_of_signal
Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
2011-03-28 06:23:47 AL M Synch Reference Not Reliable clock_synchronisation_problem Synchronization=1
2011-03-28 06:24:31 AL * Synch Reference Not Reliable clock_synchronisation_problem Synchronization=1
2011-03-28 06:27:18 AL M System Clock in Holdover Mode replaceable_unit_problem Synchronization=1
ENB03> lg
***************************************************************************************
lg[acdefghilmnopqrstuvwxyz] [-l <logdirectory|logfile|zipfile>] [-m <minustime>] [-p <plustime>] [-s <startdate>] [-e <enddate>] [-g
<boardgroup >] [-n <nodefilter>] [|<unixcmds>]
***************************************************************************************
Fetching and processing of node logs
All options can be combined together, except options "d","w","x","f" which can only be combined with the options "r" and "c".
Log Options:
************
- a: Alarm log (ALARM_LOG.xml). History of alarms raising and ceasing.
- x: Active alarms (ALARM_LOG.xml). Snapshot of alarms active on a specific date/time given in -m/-s option.
- e: Event log (EVENT_LOG.xml). History of MO events.
- v: Availability log (CELLO_AVAILABILITY2_LOG.xml). History of node/board/program restarts.
- s: System log (/c/logfiles/systemlog). History of node/board/program restarts.
- p: Post Mortem Dumps (/c/pmd) and LTE ENodeB error files (/c/logfiles/troubleshooting/error). History of board/program crashes. PMD files are
saved permanently in moshell_logfiles/logs_moshell/pmdfiles/<nodeaddress>/pmd .
- u: Upgrade log (Trace.log and Trace.log_old). History of system upgrades.
- d: Downtime log. History of node outages.
- o: MO command log (CORBA_AUDITTRAIL_LOG.xml). History of MO write commands (set/action/create/delete).
- q: MO command log in "trun" format (CORBA_AUDITTRAIL_LOG.xml). Useful for recovering configuration data which was not saved to CV before node
Check Tac
ENB03> get . tac

==========================================================================================================
=======
MO Attribute Value
==========================================================================================================
=======
Security=1 targetMonitorPortActive true
EUtraNetwork=1,ExternalENodeBFunction=Samsung,ExternalEUtranCellFDD=4506-18-1 tac 4
EUtraNetwork=1,ExternalENodeBFunction=Samsung,ExternalEUtranCellFDD=4506-18-2 tac 4
EUtraNetwork=1,ExternalENodeBFunction=Samsung,ExternalEUtranCellFDD=Samsung tac 4
EUtraNetwork=1,ExternalENodeBFunction=NSN,ExternalEUtranCellFDD=NSN tac 52
EUtraNetwork=1,ExternalENodeBFunction=ENB02,ExternalEUtranCellFDD=4506-2-21 tac 4
EUtraNetwork=1,ExternalENodeBFunction=ENB02,ExternalEUtranCellFDD=4506-2-22 tac 4
EUtraNetwork=1,ExternalENodeBFunction=ENB02,ExternalEUtranCellFDD=ENB02 tac 4
EUtraNetwork=1,ExternalENodeBFunction=1,ExternalEUtranCellFDD=43 tac 4 TAC : Tracking Area Code
EUtraNetwork=1,ExternalENodeBFunction=1,ExternalEUtranCellFDD=42 tac 4
EUtraNetwork=1,ExternalENodeBFunction=1,ExternalEUtranCellFDD=4506-4-41 tac 4
EUtranCellFDD=33 dlInterferenceManagementActive true
EUtranCellFDD=33 tac 2
EUtranCellFDD=33 ulInterferenceManagementActive true
==========================================================================================================
=======
Total: 14 Mos
ENB04> eset1 EUtranCellFDD tac 4

Set following 3 attributes?
============================================================================================================
762 EUtranCellFDD=41 tac
============================================================================================================
Set 3 attributes. Are you Sure [y/n] ? y
============================================================================================================
=====
Id MO Attribute Value Result
============================================================================================================
=====
762 EUtranCellFDD=41 tac 3 >>> Set.
784 EUtranCellFDD=43 tac 3 >>> Set.
Check Center frequency
ENB04> get . earfcn Check frequency allocation

information
110322-21:48:28 10.0.0.165 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/2744
=================================================================================================================
MO Attribute Value LGU+ Center Frequency
889.0Mhz(DL) : 2600
=================================================================================================================
EUtranCellFDD=41 earfcndl 2600
EUtranCellFDD=41 earfcnul 20600 844.0Mhz(UL) : 20600
EUtranCellFDD=43 earfcnul 20600
EUtranCellFDD=42 earfcnul 20600
=================================================================================================================
Total: 3 MOs
set EUtranCellFDD earfcnul 21400

set EUtranCellFDD earfcndl 3400
LGU+ Center Freq

889.0Mhz(DL) : 2600
844.0Mhz(UL) : 20600
set EUtranCellFDD earfcnul 20600

set EUtranCellFDD earfcndl 2600
Attribute 1 of 8, earfcndl (long): 3400

Attribute 2 of 8, earfcnul (long): 21400
Check frequency bandwidth
Bandwidth change
ENB02> get . band
Use for frequency Bandwidth
110322-22:04:47 10.0.0.163 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/4500 check get . dlchannel
================================================================================================= get . ulchannel
MO Attribute Value lst cell
=================================================================================================
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz CapacityChannelBandwidthId 10MHz bl 865
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz capacityUnitChannelBandwidth Number of 10000kHz licenses set EUtranCellFDD=31 dlChannelBandwidth 5000
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz keyIdChannelBandwidth CXC4010718
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz licenseCapacityChannelBandwidth 1 set EUtranCellFDD=31 ulChannelBandwidth 5000
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=10MHz licenseStateChannelBandwidth 1 (ENABLED) get . Channelband
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz CapacityChannelBandwidthId 15MHz
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz capacityUnitChannelBandwidth Number of 15000kHz licenses
lst cell
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz keyIdChannelBandwidth CXC4010719 deb 865
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz licenseCapacityChannelBandwidth 1 get 865
Licensing=1,CapacityLicenses=1,CapacityChannelBandwidth=15MHz licenseStateChannelBandwidth 1 (ENABLED)
Licensing=1,CapacityLicenses=1,UlBasebandCapacity=1 UlBasebandCapacityId 1
ENodeBFunction=1 dlTransNwBandwidth 1000
ENodeBFunction=1 ulTransNwBandwidth 1000
EUtraNetwork=1,ExternalENodeBFunction=4506-3,ExternalEUtranCellFDD=4506-3-31 dlChannelBandwidth 10000
EUtraNetwork=1,ExternalENodeBFunction=4506-3,ExternalEUtranCellFDD=4506-3-31 ulChannelBandwidth 10000
EUtraNetwork=1,ExternalENodeBFunction=4506-4,ExternalEUtranCellFDD=4506-4-42 ulChannelBandwidth 10000 Uplink to no. 21 Cell
EUtraNetwork=1,ExternalENodeBFunction=4506-4,ExternalEUtranCellFDD=4506-4-43 dlChannelBandwidth 10000 bandwidth is 10Mhz
EUtranCellFDD=21 dlChannelBandwidth 10000
EUtranCellFDD=21 prsBandwidth 4 (N100)
EUtranCellFDD=21 ulChannelBandwidth 10000
EUtranCellFDD=22 prsBandwidth 4 (N100) Downlink to no. 21 Cell
EUtranCellFDD=22,EUtranFreqRelation=3 allowedMeasBandwidth 6
downlink bandwidth is
Cdma2000Network=1,Cdma2000FreqBand=1 Cdma2000FreqBandId 1 10Mhz
Cdma2000Network=1,Cdma2000FreqBand=1 hrpdBandClass 4 (BAND_CLASS_4)
EUtranCellFDD=23 prsBandwidth 4 (N100)
AdmissionControl=1 dlTransNwBandwidth 1000
AdmissionControl=1 ulTransNwBandwidth 1000
SectorEquipmentFunction=S1 fqBand 0
================================================================================================
Total: 24 MOs
Check Feature (Major functions)
ENB02> get . feature Status check command to see if Feature(major functions) are
ACTIVATED or DEACTIVATED
==========================================================================================
MO Attribute Valu e
==========================================================================================
Licensing=1,OptionalFeatures=1 OptionalFeaturesId 1
Licensing=1,OptionalFeatures=1,SharedNetworkSupport=1 featureStateSharedNetworkSupport 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Dl64Qam=1 featureStateDl64Qam 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,MixedMode=1 featureStateMixedMode 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,IntraLTEHandover=1 featureStateIntraLTEHandover 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,CsfbForLimitedDualRadioUE=1 featureStateCsfbForLimitedDualRadioUE 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,AirIfLoadGenerator=1 featureStateAilg 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RetSupport=1 featureStateRetSupport 0 (DEACTIVATED) For example) Certain function
Licensing=1,OptionalFeatures=1,Anr=1 featureStateAnr 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Aisgv2FwDownload=1 featureStateAisgv2FwDownload 0 (DEACTIVATED) (ANR : Auto Neighbor
Licensing=1,OptionalFeatures=1,InterFrequencyLTEHandover=1 featureStateInterFrequencyLTEHandover 1 (ACTIVATED) relation) is DEACTIVATED,
Licensing=1,OptionalFeatures=1,Irc=1 featureStateIrc 0 (DEACTIVATED) thus will not work.
Licensing=1,OptionalFeatures=1,MultiErabsPerUser=1 featureStateMultiErabsPerUser 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,WcdmaSessionContinuity=1 featureStateWcdmaSessionContinuity 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RbsEventStreamer=1 featureStateEventStreaming 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,OtdoaSupl=1 featureStateOtdoaSupl 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RlcUm=1 featureStateRlcUm 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,PmInitiatedUeMeasurements=1 featureStatePmInitiatedUeMeasurements 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,TimeAndPhaseSynchWithGPS=1 featureStateTimeAndPhaseSynchWithGPS 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,AgpsSupl=1 featureStateAgpsSupl 0 (DEACTIVATED) When the function is
Licensing=1,OptionalFeatures=1,InterFrequencySessionContinuity=1 featureStateInterFrequencySessionContinuity 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,UePosCellId=1 featureStateCellId 0 (DEACTIVATED) DEACTIVATED, SIB5 doesn’t go
Licensing=1,OptionalFeatures=1,RetCascading=1 featureStateRetCascading 0 (DEACTIVATED) down.
Licensing=1,OptionalFeatures=1,VswrSupervision=1 featureStateVswrSupervision 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,DualAntDlPerfPkg=1 featureStateDualAntDlPerfPkg 1 (ACTIVATED)
Licensing=1,OptionalFeatures=1,IntraLTEHODataFwd=1 featureStateIntraLTEHODataFwd 0 (DEACTIVATED) When the function is
Licensing=1,OptionalFeatures=1,GsmSessionContinuity=1 featureStateGsmSessionContinuity 0 (DEACTIVATED) DEACTIVATED, it is impossible to
Licensing=1,OptionalFeatures=1,TmaSupport=1 featureStateTmaSupport 0 (DEACTIVATED) have MIMO configuration.
Licensing=1,OptionalFeatures=1,Cdma2000SessionContinuity=1 featureStateCdma2000SessionContinuity 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,RetConfigurationMgt=1 featureStateRetConfigurationMgt 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,MaximumCellRange=1 featureStateMaximumCellRange 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,QosAwareScheduler=1 featureStateQosAwareScheduler 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,CsfbToGsmWcdma=1 featureStateCsfbToGsmWcdma 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Drx=1 featureStateDrx 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,EcsCsfb=1 featureStateEcsCsfb 0 (DEACTIVATED)
Licensing=1,OptionalFeatures=1,Ul16Qam=1 featureStateUl16Qam 1 (ACTIVATED)
IpSec=1 featureState 0 (DEACTIVATED)
=========================================================================================
Total: 37 MOs
Check license State
ENB02> inv
Use for License Status Check
=================================================================================================================
Feature keyId licenseState featureState serviceState description
=================================================================================================================
AgpsSupl=1 CXC4010963 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
AirIfLoadGenerator=1 CXC4010955 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
Aisgv2FwDownload=1 CXC4011036 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
Anr=1 CXC4010620 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) Automated Neighbour Relations
Cdma2000SessionContinuity=1 CXC4010614 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) CDMA2000 Session continuity, coverage triggered
CsfbForLimitedDualRadioUE=1 CXC4010949 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
CsfbToGsmWcdma=1 CXC4010956 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
Dl64Qam=1 CXC4010610 1 (ENABLED) 1 (ACTIVATED) 1 (OPERABLE) 64-QAM DL
Drx=1 CXC4010912 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
DualAntDlPerfPkg=1 CXC4010609 1 (ENABLED) 1 (ACTIVATED) 1 (OPERABLE) Dual Antenna DL Performance Package
EcsCsfb=1 CXC4011034 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
GsmSessionContinuity=1 CXC4010618 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) GERAN Session continuity, coverage triggered
SharedNetworkSupport=1 CXC4010960 0 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
TimeAndPhaseSynchWithGPS=1 CXC4010917 0 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
TmaSupport=1 CXC4010621 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) TMA Support
UePosCellId=1 CXC4010841 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
Ul16Qam=1 CXC4010611 1 (ENABLED) 1 (ACTIVATED) 1 (OPERABLE) 16-QAM UL
VswrSupervision=1 CXC4010799 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) VSWR
WcdmaSessionContinuity=1 CXC4010616 1 (ENABLED) 0 (DEACTIVATED) 0 (INOPERABLE) WCDMA Session continuity, coverage triggered
===============================================================================================================
===============================================================================================================
Capacity keyId licenseState licenseCapacity capacityUnit hardLimit percentileConf
===============================================================================================================
ChannelBandwidth=10MHz CXC4010718 1 (ENABLED) 1 Nr of 10000kHz licenses
ChannelBandwidth=1p4Mhz CXC4010721 0 (DISABLED) 0 Nr of 1400kHz licenses
ChannelBandwidth=3MHz CXC4010722 0 (DISABLED) 0 Nr of 3000kHz licenses
ConnectedUsers=1 CXC4010608 1 (ENABLED) 500 Nr of Connected Users 20 0 90
DlBasebandCapacity=1 CXC4010623 1 (ENABLED) 173 Mbit/s 65535 90
DlPrbCapacity=1 CXC4011039 1 (ENABLED) 65535 Nr of PRBs 65535 90
OutputPower=40Watt CXC4010625 1 (ENABLED) 6 Nr of 40 Watt Licenses
OutputPower=60Watt CXC4010626 1 (ENABLED) 6 Nr of 60 Watt Licenses
UlBasebandCapacity=1 CXC4010624 1 (ENABLED) 56 Mbit/s 65535 90
UlPrbCapacity=1 CXC4011040 1 (ENABLED) 65535 Nr of PRBs 65535 90
================================================================================================================
Check Clock statusLOCK → Hold over → Free Running→ Loss of tracking
No impact on calls Cell operation stat disable 값 상태
0 UNKNOWN_MODE
ENB02> get sync
1 STARTUP_MODE
================================================================================================================= 2 LOCKED_MODE
39 SystemFunctions=1,Licensing=1,OptionalFeatures=1,TimeAndPhaseSynchWithGPS=1
================================================================================================================= 3 HOLD_OVER_MODE
TimeAndPhaseSynchWithGPSId 1
featureStateTimeAndPhaseSynchWithGPS 0 (DEACTIVATED) 4 FREE_RUNNING_MODE
keyIdTimeAndPhaseSynchWithGPS CXC4010917
licenseStateTimeAndPhaseSynchWithGPS 0 (DISABLED)
5 FAILED_MODE
serviceStateTimeAndPhaseSynchWithGPS 0 (INOPERABLE)
6 LOSS_OF_TRACKING_MODE
=================================================================================================================
60 TransportNetwork=1,Synchronization=1 7 NOT_APPLICABLE
=================================================================================================================
SynchronizationId 1
degradationIsFault 0 (DEGR_NOT_FAULT)
nodeSystemClock 2 (LOCKED_MODE) ACTIVE : 2, INACTIVE : 1
syncRefActivity i[8] = 1 2 1 1 1 1 1 1
syncRefPriority i[8] = 1 2 0 0 0 0 0 0
syncRefStatus i[8] = 0 3 0 0 0 0 0 0 Set Priority
syncReference [8] =
>>> syncReference = Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
>>> syncReference = IpSystem=1,IpAccessHostEt=1,IpSyncRef=1
3 Normal Lock status
>>> syncReference =
>>> syncReference = 값 상태
>>> syncReference =
>>> syncReference = 0 FAILED
>>> syncReference =
>>> syncReference = 1 DEGRADED
userLabel
================================================================================================================= 2 LOSS_OF_TRACKING
114 Equipment=1,Subrack=1,Slot=1,PlugInUnit=1,TimingUnit=1,TuSyncRef=GPS
================================================================================================================= 3 OK
TuSyncRefId GPS
administrativeState 1 (UNLOCKED) 4 REF_PATH_FAILED_A
availabilityStatus 2 (FAILED)
operationalState 0 (DISABLED) 5 REF_PATH_FAILED_B
값 상태
reservedBy [1] =
>>> reservedBy = TransportNetwork=1,Synchronization=1 0 NO_STATUS 6 NOT_RELIABLE
userLabel 1
=================================================================================================================
IN_TEST 7 LOW_QUALITY
960 IpSystem=1,IpAccessHostEt=1,IpSyncRef=1 2 FAILED
=================================================================================================================
4 POWER_OFF
IpSyncRefId 1
administrativeState 1 (UNLOCKED) 8 OFF_LINE
availabilityStatus 0 (NO_STATUS) 16 OFF_DUTY
cachedIpAddress
ntpServerIpAddress 172.30.108.217 64 DEGRADED
operationalState 1 (ENABLED) 128 NOT_INSTALLED
reservedBy [1] =
>>> reservedBy = TransportNetwork=1,Synchronization=1 256 LOG_FULL
syncStatus 2 (OK) 544 DEPENDENCY_LOCKED
userLabel
1056
================================================================================================================= DEPENDENCY_FAILED
Total: 4 MOs 2080 DEPENDENCY_SHUTTINGDOWN
Check Sync data
0 UNKNOWN_MODE 0 FAILED
Synchronization ref erence cannot perf orm its required tasks.
1 STARTUP_MODE
The system clock is starting up. 1 DEGRADED
Capability of the synchronization ref erence to perf orm its required tasks is
2 LOCKED_MODE degraded, f or example, because of high bit error rate. This value is applicable
The system clock signal on the Timing Unit is locked: a synchronization only f or synchronization ref erences that carry traf f ic, that is, f or ET physical
ref erence is used to generate the system clock, the clock accuracy is 50 ppb path terminations.
or better. 2 LOSS_OF_TRACKING
3 HOLD_OVER_MODE The algorithm f or system clock regulation cannot f ollow the synchronization
The system clock signal on the Timing Unit has holdover quality: no ref erence signal either because of the poor quality of the signal or because of
synchronization ref erence is used to generate the system clock, the clock a HW f ault.
accuracy is 50 ppb or better. 3 OK
Synchronization ref erence is capable of perf orming its required tasks.
4 FREE_RUNNING_MODE
The system clock signal on the Timing Unit is f ree-running: no 4 REF_PATH_FAILED_A
synchronization ref erence is used to generate the system clock, the clock Synchronization ref erence cannot be distributed on plane A.
accuracy is 4.6 ppm or better. 5 REF_PATH_FAILED_B
5 FAILED_MODE Synchronization ref erence cannot be distributed on plane B.
The system clock signal on the Timing Unit is f ailed: there is f ault in 6 NOT_RELIABLE
generating the system clock, no guarantee of clock accuracy level. No NTP packets are received f rom the server. This value is only used f or IP
synchronization ref erences.
6 LOSS_OF_TRACKING_MODE
The f requency of the system clock is at its upper or lower limit. 7 LOW_QUALITY
The time stamp packets received f rom the NTP server are not reliable and the
7 NOT_APPLICABLE synchronization algorithm cannot lock to IP ref erence. This value is only used
The system clock signal on Timing Unit is not applicable: the TUB or the CBU f or IP synchronization ref erences.
is not present.
0 NO_STATUS
No other availability status f or this resource is currently present.
1 IN_TEST
The resource is undergoing a test procedure. Tests that do not exclude additional users can be present in any operational sta te or administrative state.
2 FAILED
The resource has an internal f ault that prevents it f rom operating. The operational state is disabled.
4 POWER_OFF
The resource requires power to be applied and is not powered on. The operational state is disabled.
8 OFF_LINE
The resource requires a routine operation to be perf ormed to place it online and make it available f or use. The operation may be manual, automatic, or both. The
operational state is disabled or enabled.
16 OFF_DUTY
The resource has been made inactive by some internal control process in accordance with a predetermined time schedule. Under normal conditions the control process
can be expected to reactivate the resource at some scheduled time, and it is theref ore considered to be optional. The operati onal state is enabled or disabled.
64 DEGRADED
The service available f rom the resource is degraded in some respect, such as in speed or operating capacity. However, the res ource remains available f or service, either
because some services are satisf actory or because degraded service is pref erable to no service at all. The operational state is enabled.
128 NOT_INSTALLED
The resource represented by the managed object is not present, or is incomplete. For example, a plug -in unit is missing, a cable is disconnected, or a sof tware module is
not loaded. The operational state is disabled.
256 LOG_FULL
This indicates a log f ull condition. Currently not used.
544 DEPENDENCY_LOCKED
The administrative state of a resource that this resource depends on is locked or the availability status of the other resour ce is dependency locked. The operational state is
disabled.
1056 DEPENDENCY_FAILED
The availability status of a resource that this resource depends on is f ailed or dependency f ailed. The operational state is disabled.
2080 DEPENDENCY_SHUTTINGDOWN
The administrative state of a resource that this resource depends on is shutting down or the availability status of the other resource is dependency shutting down. The
operational state is disabled.
Check NTP (Synchronization Server)
ENB02> get . ntp

=============================================================================================
MO Attribute Value
=============================================================================================
ManagedElementData=1 ntpBurstFlagPrimary true
ManagedElementData=1 ntpBurstFlagSecondary false
ManagedElementData=1 ntpBurstFlagThird false
ManagedElementData=1 ntpMaxPollPrimary 1024
ManagedElementData=1 ntpMaxPollSecondary 1024
ManagedElementData=1 ntpMaxPollThird 1024
Sync clock based on
ManagedElementData=1 ntpMinPollPrimary 16
ManagedElementData=1 ntpMinPollSecondary 64 the server
ManagedElementData=1 ntpMinPollThird 64
ManagedElementData=1 ntpServerAddressPrimary 10.0.0.19
ManagedElementData=1 ntpServerAddressSecondary 0.0.0.0
ManagedElementData=1 ntpServerAddressThird 0.0.0.0
ManagedElementData=1 ntpServiceActivePrimary true
ManagedElementData=1 ntpServiceActiveSecondary false Have StatisticsData
ManagedElementData=1 ntpServiceActiveThird false based on the server
IpAccessHostEt=1 ntpDscp 46
IpAccessHostEt=1 ntpServerMode 0 (DISABLED)
IpAccessHostEt=1,IpSyncRef=1 ntpServerIpAddress 172.30.108.217
EUtranCellFDD=21,UeMeasControl=1 measurementPriority 0 (ANR_PRIO)
EUtranCellFDD=21,UeMeasControl=1,ReportConfigEUtraIntraFreqPm=1 reportAmountPm 0
EUtranCellFDD=22,UeMeasControl=1 measurementPriority 0 (ANR_PRIO)
EUtranCellFDD=23,UeMeasControl=1 measurementPriority 1 (PM_PRIO)
EUtranCellFDD=23,UeMeasControl=1,ReportConfigEUtraIntraFreqPm=1 reportAmountPm 0
==============================================================================================
Total: 8 MOs
Check time
ENB04> get 1 Check time Data

============================================================================
1 ManagedElementData=1
============================================================================
ManagedElementDataId 1
autoConfigurationAllowed true
autoConfigurationStatus 0 (IDLE)
daylightSavingTime false
docLibSystemDefined
docLibUserDefined
documentServerAddress
hdVolumeCFreespace 658620416
JST, KST Standard
hdVolumeCSize 1203199488
logonServerAddress time
minimumHdVolumeCFreespace 200
nodeLocalTimeZone GMT
nodeUTCTime 1300866547000
nodeUniqueID
ntpBurstFlagPrimary true
ENB02> ntpconfig info
ntpBurstFlagSecondary false
ntpBurstFlagThird false
$ ntpconfig info
ntpMaxPollPrimary 1024
Primary server: 10.0.0.19
ntpMaxPollSecondary 1024
No secondary server found
ntpMaxPollThird 1024
No tertiary server found
ntpMinPollPrimary 16
ntpMinPollSecondary 64
NTP synchronized 2011-03-23 08:48:59
ntpMinPollThird 64
NTP changed server 2011-03-23 08:32:11 10.0.0.19
ntpServerAddressPrimary 10.0.0.19
NTP clock stepped 2011-03-23 08:31:51 2011-03-23 08:31:51.127->2011-03-23 08:31:51.129 (src 10.0.0.19
ntpServerAddressSecondary 0.0.0.0
$
ntpServerAddressThird 0.0.0.0
ntpServiceActivePrimary true
ntpServiceActiveSecondary false
ntpServiceActiveThird false
piuGroupEscalationType 4 (WARM_AT_PIU_RESTART)
swServerUrlList
===========================================================================
Total: 1 MOs
Laptop time (2011.03.22 16:49:25)

ENB04> readclock

$ readclock
Date: 2011-03-23 UTC Time: 07:49:12. Wednesday
eNB time (2011.03.23 07:49:12)

Check how many calls were made
ENB02> ue print -admitted Command to check how many calls are in

operation
$ ue print -admitted
CellId #UE:s #Bearers
31 2 2 By default, when there is a call in UE 1,
32 2 2 Bearers display 1 as well.
33 1 1
ENB03> ue print -ue -allcell

$ ue print -ue -allcell
CellId RacUeRef BbUeRef {traceRef,interfaces,traceDepth,ipAddress} TypeOfActiveTrace SetByColi CTSess
31 20 520100256 X CRUT false 43711
31 23 520100416 X CRUT false 43714
32 17 536877568 X CRUT false 21863
32 19 536877728 X CRUT false 21865
33 169 553654880 X CRUT false 170
$ /home/Administrator/moshell/commonjars/connect: connection timed out

$
How to check bearer information
ENB02> appsh oper
$ appsh oper
egr_sid: ipIf | host | ipDA | dstPort | status
None found
0 UDP sessions in operational
egr_sid: laid | ipDA | teid | status

18 : 0 | 4.3.0.148 | 2487747802 | ok
21 : 0 | 4.2.0.150 | 3235900547 | ok
22 : 0 | 4.2.0.150 | 3620931837 | ok
23 : 0 | 4.2.0.150 | 988112966 | ok
24 : 0 | 4.2.0.150 | 2032833662 | ok
5 GTP sessions in operational
$
ENB02> appsh data 6
110318-20:05:42 10.0.0.163 8.0s ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/5752
$ appsh data 6
appsh data <{udp|gtp}> <sid>
ENB02> appsh data gtp 21

$ appsh data gtp 4
ipInterfaceIndex =0
hostIndex =1 Check TEID in S1 side to distinguish default /
ipInterfaceIndex_old =7 dedicated bearer
hostIndex_old = 31
remoteIpAddress = 4.2.0.150
receiveTEID = 1671200888
dscp = 20
clientInternalSwitchAddress = 02:00:01:03:00:03
serverInternalSwitchAddress = 02:00:01:02:00:03
internalVLANID = 10
sessionId =4
ENB02> appsh data gtp 22

$ appsh data gtp 5
ipInterfaceIndex =0
hostIndex =1
ipInterfaceIndex_old =7
hostIndex_old = 31
remoteIpAddress = 4.2.0.150
receiveTEID = 615576315
dscp = 46
clientInternalSwitchAddress = 02:00:01:03:00:03
serverInternalSwitchAddress = 02:00:01:02:00:03
internalVLANID = 10
sessionId =5
Handover
ENB02> get . term Inter eNB connection information for X2

Handover
=================================================================================================================
MO Attribute Value
=================================================================================================================
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1 ExchangeTerminalIpId 1
TermPointToMme=LGERMME02 TermPointToMmeId LGERMME02
EUtraNetwork=1,ExternalENodeBFunction=4506-3,TermPointToENB=4506-3 TermPointToENBId 4506-3
EUtraNetwork=1,ExternalENodeBFunction=4506-4,TermPointToENB=4506-4 TermPointToENBId 4506-4
TermPointToMme=Samsung2 TermPointToMmeId Samsung2
TermPointToMme=LGERMME01 TermPointToMmeId LGERMME01
TermPointToMme=Samsung1 TermPointToMmeId Samsung1
=================================================================================================================
Total: 7 MOs
ENB02> get . relation Inter cell information for X2 Handover

=================================================================================================================
MO Attribute Value
=================================================================================================================
EUtranCellFDD=22,EUtranFreqRelation=3 EUtranFreqRelationId 3
=================================================================================================================
Total: 1 Mos
ENB02> get . external eNB information for Handover

=================================================================================================================
MO Attribute Value
=================================================================================================================
HwUnit=SCU,AlarmPort=14 activeExternalAlarm false
EUtraNetwork=1,ExternalENodeBFunction=4506-3 ExternalENodeBFunctionId 4506-3
EUtraNetwork=1,ExternalENodeBFunction=4506-3,ExternalEUtranCellFDD=4506-3-31 ExternalEUtranCellFDDId 4506-3-31
EUtraNetwork=1,ExternalENodeBFunction=4506-4 ExternalENodeBFunctionId 4506-4
=================================================================================================================
Total: 24 MOs
Check IP Address, v-LAN id
ENB02> get . ipaddress

==========================================================================================
MO Attribute Value
==========================================================================================
Security=1 aAServerIPAddressList s[0] =
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 ownIpAddressActive 0.0.0.0
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 ownIpAddressPassive 0.0.0.0
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=2 ownIpAddressActive 10.0.0.163
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=2 ownIpAddressPassive 0.0.0.0
UpgradePackage=R20HN ftpServerIpAddress 192.168.10.10
UpgradePackage=InitialUP ftpServerIpAddress FTP_ServerIP_Address
UpgradePackage=CXP102051/10_R9BE/2 ftpServerIpAddress 10.0.0.36
UpgradePackage=R9AS ftpServerIpAddress 169.254.1.11
UpgradePackage=R7AK ftpServerIpAddress 169.254.1.11 Check O&M IP address
Ip=1 nodeIpAddress 10.0.0.163
Ip=1,EthernetLink=1 ipAddress 169.254.1.10
Ip=1,IpHostLink=1 ipAddress 10.0.0.163
IpAccessHostEt=1 ipAddress 4.2.0.18
IpAccessHostEt=1,IpSyncRef=1 cachedIpAddress
IpAccessHostEt=1,IpSyncRef=1 ntpServerIpAddress 172.30.108.217
TermPointToMme=LGERMME02 ipAddress2 0.0.0.0 Check station IP address
EUtraNetwork=1,ExternalENodeBFunction=4506-3,TermPointToENB=4506-3 ipAddress 4.2.0.34
EUtraNetwork=1,ExternalENodeBFunction=4506-3,TermPointToENB=4506-3 usedIpAddress 0.0.0.0
EUtraNetwork=1,ExternalENodeBFunction=4506-4,TermPointToENB=4506-4 ipAddress 4.2.0.50
EUtraNetwork=1,ExternalENodeBFunction=4506-4,TermPointToENB=4506-4 usedIpAddress 0.0.0.0
TermPointToMme=Samsung2 ipAddress1 4.3.0.140
TermPointToMme=Samsung2 usedIpAddress 0.0.0.0
TermPointToMme=LGERMME01 ipAddress2 0.0.0.0 Check MME IP address
TermPointToMme=Samsung1 usedIpAddress 4.3.0.132
===========================================================================================
Total: 19 Mos
10.0.0.164> get . vid

===========================================================================================
MO Attribute Value
===========================================================================================
Subrack=1,Slot=1,PlugInUnit=1,ExchangeTerminalIp=1,GigaBitEthernet=1,IpInterface=1 vid 900
===========================================================================================
Total: 1 MOs
Checklist in case of failure
ENB03> cabr
====================================================================================================
Pos Date and Time Domain OS Process Errorcode Cause (PMD ID)
====================================================================================================
0001 00-00-00 00:00:00 Processor BASIC 0x00000003 Error log was cleared at last restart. Power on restart
0001 11-03-28 01:26:04 Processor BASIC Cs_boardManager_proc 0xB0AD0002 Board manager restart. Restart ordered by system manager
0001 11-03-28 01:26:12 Processor BASIC bmLoaderClientHelper 0xB0AD0001 Board manager restart. Mismatch of files in flash, goto backup
0001 11-03-28 01:26:48 Processor BACKUP bmLoaderClientHelper 0xB0AD0001 Board manager restart. Reset after backupmode
0001 11-03-28 01:27:40 Processor BASIC Cs_boardManager_proc 0xB0AD0006 Board manager restart. Restart ordered by system manager
---------------------------------------------------------------------------------------------------------------
ENB02> caba
=====================================================================================================
Pos Date and Time Domain OS Process Errorcode Cause (PMD ID)
=====================================================================================================
0001 00-00-00 00:00:00 Processor BASIC 0x00000003 Error log was cleared at last restart. Power on restart
---------------------------------------------------------------------------------------------------------------
$
Check VSWR
Check O&M IP address

ENB01> cabx
===============================================================================================
SMN APN PORT BOARD GREEN YELLOW RED PRODUCT NR REV DATE SERIAL NR
===============================================================================================
0 1 BXP_0_1 RUS01B5 steady 16hz off KRC11864/2 R1C 20100923 C823763459
--------------------------------------------------------------------------------------------------------------------------------
ENB01> lhsh BXP_3_1 fui get vswr
110110-18:33:56 10.0.0.162 8.0n ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/5096

$ lhsh BXP_3_1 fui get vswr
vswr: 28.5[dB]
ntpServerIpAddress 172.30.108.217
ENB01> cabx
============================================================================================================
====================
============================================================================================================
====================
--------------------------------------------------------------------------------------------------------------------------------
ENB01> lhsh BXP_4_1 fui get vswr

$ lhsh BXP_3_1 fui get vswr
vswr: 28.5[dB]
Check current output
ENB02> cabx
==============================================================================================
=============================================================================================
0 1 BXP_2_1 RUS01B5 steady off off KRC11864/2 R1C 20101103 C82386378 5
0 1 BXP_5_1 RUS01B5 steady off off KRC11864/2 R1C 20100913 C823738900
--------------------------------------------------------------------------------------------------------------------------------
ENB02> lhsh BXP_2_1 warpA read DL_PM_PA0_C0

$ lhsh BXP_2_1 warpA read DL_PM_PA0_C0
Value 0x002DE4FF (3007743) read from address 0x00000B8F.
$
ENB02> lhsh BXP_2_1 warpA read DL_PM_PA0_C1 If there is a value here, you
can see there is TX output.
Value 0x003BB172 (3912050) read from address 0x00000B90.
$
ENB02> lhsh BXP_2_1 warpA read DL_PM_PA0_C2

Value 0x003888B1 (3705009) read from address 0x00000B91.
$
ENB02> lhsh BXP_2_1 warpA read DL_PM_PA0_C3 Provide accurate output value
$ lhsh BXP_2_1 warpA read DL_PM_PA0_C3 a. p_c0 = p_reg_c0*(2^14)/(15*81920) = p_reg_c0 * 16384 / 1228800
Value 0x002E0F80 (3018624) read from address 0x00000B92.
b. p_c1 = p_reg_c1*(2^14)/(15*81920) = p_reg_c1 * 16384 / 1228800
c. p_c2 = p_reg_c2*(2^14)/(15*81920) = p_reg_c2 * 16384 / 1228800
d. p_c3 = p_reg_c3*(2^14)/(15*81920) = p_reg_c3 * 16384 / 1228800
Total = p_c0 + p_c1 + p_c2 + p_c3
(Total / 2914^2) * 60 W
Check output target
ENB04> get . power Use when you check

output value
============================================================================================
MO Attribute Value
============================================================================================
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt CapacityOutputPowerId 60Watt
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt capacityUnitOutputPower Number of 60 Watt Licenses
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt keyIdOutputPower CXC4010626
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt licenseCapacityOutputPower 6
Licensing=1,CapacityLicenses=1,CapacityOutputPower=60Watt licenseStateOutputPower 1 (ENABLED)
HwUnit=SAU powerDistrFaultIndicator 1 (NOT_AVAILABLE)
Subrack=1 maxPowerDissipation -1
Subrack=1 powerMeasurements Struct{5}
>>> 1.currentLeft = -1
>>> 2.currentRight = -1
>>> 3.distributedPower = 0
>>> 4.voltageLeft = -1
>>> 5.voltageRight = -1
HwUnit=PDU-1 powerDistrFaultIndicator 1 (NOT_AVAILABLE)
HwUnit=SCU powerDistrFaultIndicator 1 (NOT_AVAILABLE)
SubrackProdType=ROJ999999_* maxPowerDissipation 0
HwUnit=PDU-2 powerDistrFaultIndicator 1 (NOT_AVAILABLE)
EUtranCellFDD=43 maximumTransmissionPower 437
EUtranCellFDD=43 partOfRadioPower 60
EUtranCellFDD=43 partOfSectorPower 60
SectorEquipmentFunction=S2 confOutputPower 40
SectorEquipmentFunction=S2 sectorPower 0
PowerSupply=1 PowerSupplyId 1
PowerDistribution=1 PowerDistributionId 1
=============================================================================================
Total: 16 MOs
How to change station output

ENB03> get . power
ENB03> set EUtranCellFDD=43 partOfRadioPower 20 ( Command that modify from 60% of 43.7dBm to 20%.
ENB03> st cell
ENB03> bl cell
ENB03> deb cell
Check Security
ENB04> pr security Check whether Security should be used during handset

connection to RRC.
===================================================================================
Proxy MO
===================================================================================
57 SystemFunctions=1,Security=1
962 ENodeBFunction=1,SecurityHandling=1
===================================================================================
Total: 2 MOs
ENB04> get 962 Enter get 962 (value confirmed in the above) to check detailed
information.
============================================================================================
962 ENodeBFunction=1,SecurityHandling=1
===========================================================================================
SecurityHandlingId 1
cipheringAlgorithms 14 (EEA0)
countWrapSupervisionActive true True: Use Security during RRC connection.
integrityProtectionAlgorithms 8 (EIA2)
rbIdSupervisionActive false False: Do not use security during RRC connection.
============================================================================================
Total: 1 MOs
ENB04>
Check System constant ※ don’t open to customer
ENB04> parsemom moshell/jarxml/

ERBS_NODE_MODEL_A_9_2.xml.cache.gz* ERBS_NODE_MODEL_B_1_30_COMPLETE.xml.gz* jacoms.jar*
ERBS_NODE_MODEL_A_9_2.xml.gz* ERBS_NODE_MODEL_B_1_40.xml.cache.gz jacorb.jar*
ERBS_NODE_MODEL_A_9_53.xml.cache.gz* ERBS_NODE_MODEL_B_1_40.xml.gz lmids.txt
ERBS_NODE_MODEL_A_9_53.xml.gz* ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz* lmids.txt.old2.gz*
ERBS_NODE_MODEL_A_9_53_COMPLETE.xml.cache.gz ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.gz* moshellrc*
ERBS_NODE_MODEL_A_9_53_COMPLETE.xml.gz* MGW_R2.xml.cache.gz moshellrc.bak*
ERBS_NODE_MODEL_B_1_30.xml.cache.gz MGW_R2.xml.gz* updata.txt*
ERBS_NODE_MODEL_B_1_30.xml.gz cppdata.txt uptomom.txt
ERBS_NODE_MODEL_B_1_30_COMPLETE.xml.cache.gz* event/
ENB04> parsemom moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.gz
Parsing MOM: moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.gz .................................Done.
Caching MOM to: moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache .....Done.
Compressing to: moshell/jarxml/ERBS_NODE_MODEL_B_1_40_COMPLETE.xml.cache.gz ...Done.
Parsing file /home/Administrator/moshell/commonjars/pm/PARAM_ERBS_B_1_0.txt ............................................................................Done.
ENB04> get systemc Complete mom is changed at the time of version upgrade,
and it needs constant upgrade.
=================================================================================================
964 ENodeBFunction=1,SystemConstants=1
=================================================================================================
SystemConstantsId 1
systConstants 38:0,125:3,204:100,213:200,242:1,70:90,73:86,195:10,27:-20,256:0,258:0,229:19600
=================================================================================================
1036 SupportSystemConfiguration=1
==================================================================================================
SupportSystemConfigurationId 1
==================================================================================================
Total: 2 MOs
ENB04>
1. Put Complete mom file in C:\cygwin\home\Administrator\moshell\jarxml.
2. Enter command ( parsemom moshell/jarxml/ ) and select tab key to display Complete mom in the folder.
3. Drag and paste, then select Enter.
4. Able to check system constant status at the time of entering get systemc.
TM(Transmission mode) check and set ANT number
ENB02> get systemc
TM (Transmission Mode) : Set transmission 110324-11:45:26 10.0.0.163 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/620
mode. ============================================================================
3: MIMO 1102 ENodeBFunction=1,SystemConstants=1
============================================================================
2: SIMO
SystemConstantsId 1
1: SISO systConstants 38:0,125:3,204:100,213:200,242:1,70:90,73:86,195:10,27:-20,256:0,258:0,229:19600
============================================================================
============================================================================
============================================================================
Total: 2 Mos
eNB3> get . antenna

==============================================================================
MO Attribute Value
==============================================================================
AntennaUnitGroup=1 AntennaUnitGroupId 1
AntennaUnitGroup=1,AntennaUnit=1 AntennaUnitId 1
AntennaUnitGroup=1,AntennaUnit=1 mechanicalAntennaTilt 0
EUtranCellFDD=31 noOfRxAntennas 2
Numbur of TX ANT is currently 1 EUtranCellFDD=31 noOfTxAntennas 2
To check RX ANT number: get . noofrx EUtranCellFDD=31 noOfUsedTxAntennas 2
=============================================================================
Total: 3 MOs
SISO/SIMO: ENB02> get . nooftx
Set system constant value as 125:1 110324-11:46:07 10.0.0.163 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/620
Set Tx Ant number as 1 =============================================================================
EUtranCellFDD=21 noOfTxAntennas 1 MO Attribute Value
EUtranCellFDD=21 noOfRxAntennas 1 =============================================================================
EUtranCellFDD=21 noOfTxAntennas 1
Transmit Diversity EUtranCellFDD=22 noOfTxAntennas 1
Set system constant value as 125:2 EUtranCellFDD=23 noOfTxAntennas 1
Set Tx Ant number as 2 =============================================================================
EUtranCellFDD=21 noOfTxAntennas 2 Total: 3 MOs
Configure Licensing=1,OptionalFeatures=1,DualAntDlPerfPkg=1 featureStateDualAntDlPerfPkg 1 (ACTIVATED) //DualAntDlPerfPkg License Enable
SM
Set system constant value as 125:3 // Operate as Transmit Diversity or SM(Large CDD), according to channel environment
Set Tx Ant number as 2
EUtranCellFDD=21 noOfTxAntennas 2
Configure Licensing=1,OptionalFeatures=1,DualAntDlPerfPkg=1 featureStateDualAntDlPerfPkg 1 (ACTIVATED) //DualAntDlPerfPkg License Enable
TM(Transmission mode)
ENB04> get systemc
Check and set ANT 110402-20:51:30 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_50_COMPLETE stopfile=/tmp/5756
number ======================================================================================================
======================================================================================================
SystemConstantsId 1
systConstants
======================================================================================================
======================================================================================================
======================================================================================================
Total: 2 MOs
ENB04> acl systemc
======================================================================================================
======================================================================================================
746 SystemConstants=1 resetSystConst 1
746 SystemConstants=1 writeSystConst 2
776 SupportSystemConfiguration=1 configureSupportSystem 1
======================================================================================================
ENB04> acc 746 writeSystConst

Call Action writesystconst on following 1 MOs ?
===================================================================================
===================================================================================
Call action writesystconst on 1 MOs. Are you Sure [y/n] ? y
======================================================================================================
======================================================================================================
746 SystemConstants=1 writeSystConst 2
Parameter 1 of 2, name (string): 125
Parameter 2 of 2, value (string): 3

======================================================================================================
Configure
ENB04> pr anr
ANR 110324-14:14:53 10.0.0.165 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/640
===================================================================================
Proxy MO
===================================================================================
29 SystemFunctions=1,Licensing=1,OptionalFeatures=1,Anr=1
973 ENodeBFunction=1,EUtranCellFDD=41,UeMeasControl=1,ReportConfigEUtraBestCell=1,ReportConfigEUtraBestCellAnr=1
978 ENodeBFunction=1,EUtranCellFDD=41,UeMeasControl=1,ReportConfigA5=1,ReportConfigA5Anr=1
1006 ENodeBFunction=1,AnrFunction=1
1007 ENodeBFunction=1,AnrFunction=1,AnrFunctionGeran=1
1008 ENodeBFunction=1,AnrFunction=1,AnrFunctionUtran=1
1009 ENodeBFunction=1,AnrFunction=1,AnrFunctionEUtran=1
===================================================================================
Total: 11 MOs
ENB04> get ENodeBFunction=1,AnrFunction=1,AnrFunctionEUtran=1

=================================================================================================================
1009 ENodeBFunction=1,AnrFunction=1,AnrFunctionEUtran=1
=================================================================================================================
AnrFunctionEUtranId 1
anrInterFreqState 0 (DEACTIVATED)
anrIntraFreqState 1 (ACTIVATED)
anrUesEUtraIntraFDecr 10
anrUesEUtraIntraFIncrAnr 20
anrUesEUtraIntraFIncrHo 100
anrUesEUtraIntraFMax 20
anrUesEUtraIntraFMin 1
anrUesThreshInterFDecr 10
anrUesThreshInterFIncrAnr 20
anrUesThreshInterFIncrHo 100
anrUesThreshInterFMax 20
anrUesThreshInterFMin 1
cellAddRsrpThresholdEutran -1440
cellAddRsrqThresholdEutran -1920
hoAllowedEutranPolicy true
x2SetupPolicy true
=================================================================================================================
Total: 1 MOs
ENB04> mom . cellAddRsrpThresholdEutran
####################################################################################################################################
MO Class Attribute Type Flags
####################################################################################################################################
AnrFunction cellAddRsrpThresholdEutran long deprecated
------------------------------------------------------------------------------------------------------------------------------------
Deprecated: Since L11B. Replaced by AnrFunctionEUtran::cellAddRsrpThresholdEutran.
Threshold value for reported power for a cell to be automatically added as neighbor.
Takes effects: Immediately.
Unit: 0.1 dBm
Resolution: -
Range: -1440 to 0, Default=-1440
************************************************************************************************************************************
AnrFunctionEUtran cellAddRsrpThresholdEutran long
------------------------------------------------------------------------------------------------------------------------------------
Threshold value for reported power for a cell to be automatically added as neighbor.
Takes effects: Immediately.
Unit: 0.1 dBm
Resolution: -
Range: -1440 to 0, Default=-1440
************************************************************************************************************************************
Manage and apply License
How to enter Fingerprint
ENB03> license server
169.254.1.10> acc RbsConfiguration=1 setUniqueLogicalName
110326-11:56:09 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/896 110307-19:21:26 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_30_COMPLETE
$ license server stopfile=/tmp/2748
License Server : 000101d4 Call Action setuniquelogicalname on following 1 MOs ?
Latest PV :3 ================================================
License Key File : Installed, Mon Mar 14 14:19:58 2011 776 ENodeBFunction=1,RbsConfiguration=1
Sequence Number : 1008 ================================================
Node Identity State :1
 New Sequence Number Call action setuniquelogicalname on 1 MOs. Are you Sure [y/n] ? y
Unique Logical Name : eNB3 must be bigger than
================================================
Validation Start : Sat Mar 26 13:17:56 2011 existing value.
Proxy MO Action
Validation Interval : 1 Day Nr of Params
Emergency Status : Deactivated ================================================
Emergency State :2 776 RbsConfiguration=1
Emergency Counter :1 setUniqueLogicalName 1
Emergency State Time : Tue Mar 8 09:56:59 2011
Parameter 1 of 1, uniqueLogicalName (string): eNB1
Emergency Time Limit : 7 Days
!!! Exception failure: org.omg.CORBA.COMM_FAILURE: vmcid: 0x0 minor
$ /home/Administrator/moshell/commonjars/connect: connection timed out code: 0 completed: Maybe
$
ENB03> get . fingerprint ================================================

=========================================================================
MO Attribute Value
=========================================================================
Licensing=1 fingerprint eNB3
=========================================================================
Total: 1 MOs
4.7.1 Problem Description

License keys are required in combination with any given enabled feature in order to allow full access to a feature.
The following Command Line Interface (COLI) command printouts must be taken from DUL if they are not already collected:
- license server (License Server details)
- license client (License Client details)
- License sub –a (Feature status information)
- license lkf (Status of license key file)
- license key (License key information)
All files in the /c/license/ directory must be transferred by FTP, binary mode, from the node.
Save the output in an attachment called “license_files.zip”
Manage and apply License
ENB03> acl 6
1. Upload license file(.xml) to FTP
2. Enter nmsadm if file to OSS-RC’s UAS(10.0.0.19) (Use FTP,
ID ; nmsadm, PW: nms275) ==========================================================================
==========================================================================
2. Put the file into My Computer (169.254.1.12) (Use FTP, ID: 6 Licensing=1 setEmergencyState 0
lte, pw: lte 6 Licensing=1 updateLicenseKeyFile 4
==========================================================================
3. Follow MOshell command procedure.
ENB04> acc 6 updateLicenseKeyFile

Call Action updatelicensekeyfile on following 1 MOs ?
==========================================================================
6 SystemFunctions=1,Licensing=1
==========================================================================
Call action updatelicensekeyfile on 1 MOs. Are you Sure [y/n] ? y
==========================================================================
==========================================================================
6 Licensing=1 updateLicenseKeyFile 4
Parameter 1 of 4, userId (string): lte

Parameter 2 of 4, password (string): lte
Parameter 3 of 4, ipAddress (string): 169.254.1.12
Parameter 4 of 4, sFile (string): eNB4_101224_004441.xml
==========================================================================
ENB02> inv
Check with these commands if there is ==========================================================================
any error after applying License. Feature keyId licenseState featureState serviceState
description
==========================================================================
AgpsSupl=1 CXC4010963 1 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
AirIfLoadGenerator=1 CXC4010955 1 (DISABLED) 0 (DEACTIVATED) 0 (INOPERABLE)
169.254.1.10> license lkf

$ license lkf
License Key File Status : 2 (LKF_ERROR)
Additional Info : Faulty fingerprint in the license key file.
$
Check ping
ENB03> acc ipoam ping

ENB03> get . ipadd
110330-14:25:26 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/3652 Call Action ping on following 1 MOs ?
===================================================================== ================================================================
MO Attribute Value 662 IpOam=1
===================================================================== ================================================================
UpgradePackage=R9AS ftpServerIpAddress 169.254.1.11 Call action ping on 1 MOs. Are you Sure [y/n] ? y
UpgradePackage=R9BE%2 ftpServerIpAddress 192.168.10.10
Ip=1 nodeIpAddress 10.0.0.164 =================================================================
Ip=1,EthernetLink=1 ipAddress 169.254.1.10 Proxy MO Action Nr of Params
Ip=1,IpHostLink=1 ipAddress 10.0.0.164 ===================================================================
IpAccessHostEt=1 ipAddress 4.2.0.34 662 IpOam=1 ping 1
IpAccessHostEt=1,IpSyncRef=1 cachedIpAddress
IpAccessHostEt=1,IpSyncRef=1 ntpServerIpAddress 172.30.108.217 Parameter 1 of 1, host (string): 10.0.0.19
ENodeBFunction=1 ipAddress 4.2.0.34 >>> Return value = no answer from * / 10.0.0.19
ENodeBFunction=1 x2IpAddrViaS1Active true
TermPointToMme=LGERMME02 ipAddress1 4.2.0.140 ===================================================================
TermPointToMme=LGERMME02 ipAddress2 0.0.0.0 Total: 1 MOs attempted, 1 MOs actioned
EUtraNetwork=1,ExternalENodeBFunction=ENB02,TermPointToENB=ENB02 ipAddress 4.2.0.18
EUtraNetwork=1,ExternalENodeBFunction=ENB02,TermPointToENB=ENB02 usedIpAddress
=====================================================================
Total: 20 MOs
ENB03> acc IpAccessHostEt ping

Call Action ping on following 1 MOs ?
=====================================================================
721 IpSystem=1,IpAccessHostEt=1
=====================================================================
Call action ping on 1 MOs. Are you Sure [y/n] ? y
=====================================================================
=====================================================================
721 IpAccessHostEt=1 ping 1
When ping comes back normally:
Parameter 1 of 1, host (string): 4.2.0.35 Parameter 1 of 1, host (string): 4.3.0.18
>>> Return value = 4.2.0.35 no answer
>>> Return value = 4.3.0.18 is alive
======================================================================
Statistics DATA
pm_data에 Statisticsdata is accumulated in

pm_date of station, O&M Server calls every
15 minutes.
Statistics DATA Current Statistics status
Check entire MO for Statistics
ENB03> pst
ENB03> pmom
110325-18:50:10 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE Connecting to 10.0.0.164:56834 (CorbaSecurity=OFF, corba_class=2, java=1.6.0_23, jacoms=
stopfile=/tmp/5100 Trying file=C:/cygwin/home/Administrator/moshell_logfiles/logs_moshell/tempfiles/2011036
**** Bootstrapping OK
####################################################################### ****
MO Class Pm Counters
####################################################################### $pmtester_pid = 584
CapacityConnectedUsers 5
pmLicConnectedUsersActual =============================================================
pmLicConnectedUsersDistr [24] PROXY SCANNER-NAME STATE
pmLicConnectedUsersHardLimit =============================================================
pmLicConnectedUsersLicense 1 PREDEF.STATS ACTIVE
pmLicConnectedUsersTimeCong 16 USERDEF.ENB03-stat.Profile=5000073.Continuous=Y.STATS ACTIVE
---------------------------------------------------------------------------------- 30 USERDEF.Scanner_Coming_Pck.Profile=5000071.Continuous=Y.STATS ACTIVE
Cpu 1 31 PREDEF.10000.CELLTRACE SUSPENDED
pmProcessorLoadDistr [11] (deprecated) 32 PREDEF.10001.CELLTRACE SUSPENDED
---------------------------------------------------------------------------------- 33 PREDEF.10002.CELLTRACE SUSPENDED
DlBasebandCapacity 4 34 PREDEF.10003.CELLTRACE SUSPENDED
pmLicDlCapActual 35 PREDEF.10004.CELLTRACE SUSPENDED
pmLicDlCapDistr [20] 36 PREDEF.10005.CELLTRACE SUSPENDED
pmLicDlCapLicense =============================================================
pmLicDlCapMax (deprecated) >>> Total: 9 Scanners
----------------------------------------------------------------------------------
DlPrbCapacity 3 ENB03> pgets 1 Use when you check what kind of statistics
pmLicDlPrbCapActual data is being collected
pmLicDlPrbCapDistr [20] 110326-11:37:40 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/896
pmLicDlPrbCapLicense =============================================================
---------------------------------------------------------------------------------- 1 PREDEF.STATS ACTIVE 900 156
ENodeBFunction 3 ==============================================================
pmHwUtilDl [20] EUtranCellFDD 40 pmSessionTimeDrb
pmHwUtilUl [20] pmS1SigConnEstabAtt
pmPdcpPktDiscDlEth pmS1SigConnEstabSucc
---------------------------------------------------------------------------------- pmSessionTimeUe
EUtranCellFDD 290 pmUeCtxtRelAbnormalEnbAct
pmActiveDrbDlSum pmPrbAvailUl
pmActiveDrbUlSum pmPrbUsedDl (deprecated)
pmActiveUeDlMax pmPrbUsedUl (deprecated)
pmActiveUeDlSum pmRrcConnEstabAtt
pmActiveUeUlMax pmRrcConnEstabFailLic
pmActiveUeUlSum EUtranCellRelation 4 pmHoPrepSuccLteIntraF
pmAnrNeighbrelAdd pmHoPrepAttLteIntraF
pmAnrNeighbrelRem pmHoExeSuccLteIntraF
pmBadCovEvalReport pmHoExeAttLteIntraF
pmBestCellEvalReport
pmCellDownLockAuto CapacityConnectedUsers 28 pmLicConnectedUsersDistr [24]
pmCellDownLockMan pmLicConnectedUsersLicense
pmLicConnectedUsersHardLimit
pmLicConnectedUsersTimeCong
Statistics DATA pmerablevsamp : Increase by 1 every 5 seconds when you check number of Erabs.
( 15*12 = 180)
pmErabLevSum : Counter number of Erabs every 5 seconds to have SUM for 15 minutes.
ENB03> pget . pmerablevsamp

pget : Show statistics updated every second,
110325-18:36:33 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/5100 cleared in 15 minutes.
=================================================================================================================
MO Attribute Value ※ hpget : Show vertically. pget : Show horizontally.
=================================================================================================================
EUtranCellFDD=33 pmErabLevSamp 0
=================================================================================================================
Total: 3 MOs
ENB03> pmx . pmerablevsamp . pmx : Show Statistics date collected during past
15 minutes.
.........................
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110325.0900-0915.1.xml.gz | /home/Administrator/moshell/pmExtract -u "."

"pmerablevsamp" | /home/Administrator/moshell/pmXtab -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Report from 2011-03-25 09:00 UTC to 2011-03-25 09:14 UTC
Date: 2011-03-25
Object Counter 09:00
ENB03> pmx . pmerablevsamp -s 20110324.1000 -e 20110324.1100 Assign time to pmx to check Statistics Data
110325-18:28:38 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/5100 Case 1 [-s : designate start time. e: designate end
.........................
time]
get /c/pm_data/A20110324.1000-1015:1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.1000-1015.1.xml.gz ... OK
Case 2 [-m 1(contents over the past one hour)
get /c/pm_data/A20110324.1015-1030:1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.1015-1030.1.xml.gz ... OK–
a(combined)]
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.1000-1015.1.xml.gz /home/Administrator/moshell_logfiles/logs_

moshell/pmfiles/10.0.0.164/pm_data/A20110324.1015-1030.1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.1030-
1045.1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110324.1045-1100.1.xml.gz | /home/Administrator/moshell/pmExtract
-u "." "pmerablevsamp" | /home/Administrator/moshell/pmXtab -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Date: 2011-03-24
Object Counter 10:00 10:15 10:30 10:45
EUtranCellFDD=31 pmErabLevSamp 93 113 0 0
Statistics DATA
pmSessionTimeUe : Increase by 1 every 5 seconds when you check number of Erabs.
ENB03> hpget . pmSessionTimeUe hpget : Show statistics updated every second,
cleared in 15 minutes.
.
※ hpget : Show vertically. pget : Show horizontally.
=================================================================================================================
MO pmSessionTimeUe
=================================================================================================================
EUtranCellFDD=33 0
EUtranCellFDD=32 2
EUtranCellFDD=31 0
=================================================================================================================
Total: 3 MOs
Added 3 MOs to group: hget_group

Total: 0 MOs
ENB03> pmx . pmSessionTimeUe pmx : Show Statistics date collected during past 15
minutes.
.........................
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.0030-0045.1.xml.gz | /home/Administrator/moshell/pmExtract -u "xt -m “

(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Date: 2011-03-28
EUtranCellFDD=31 pmSessionTimeUe 0
ENB03> pmx . pmSessionTimeUe -m 1 -a Assign time to pmx to check Statistics Data

.........................
Case 1 [-s : designate start time. e: designate end
time]
Case
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110327.2345-0000.1.xml.gz 2 [-m 1(contents over the past one hour) –
/home/Administrator/moshell_logfiles/logs_moshell/pmfiles
/10.0.0.164/pm_data/A20110328.0000-0015.1.xml.gz /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.0015-0030.1.xml.gz
a(combined)] /home/Administ
rator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.0030-0045.1.xml.gz | /home/Administrator/moshell/pmExtract -u "." "pmSessionTimeUe" | /home/Admi
nistrator/moshell/pmXtab -a -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Start Time: 2011-03-27 23:45:00 End Time: 2011-03-28 00:30:00

Object Counter
Statistics DATA ( no. of rach tried calls, cell status) ※hpget: Classified as horizontal pget: Classified as vertical
ENB04> hpget fdd cbra

.
===================================================================================================
MO pmRaAttCbra pmRaFailCbraMsg2Disc pmRaSuccCbra
===================================================================================================
EUtranCellFDD=41 0 0 0
Tried Contention base rach access three
EUtranCellFDD=43 3 -2 3 times and succeeded three time, middle
EUtranCellFDD=42 0 0 0 value can be disregarded
===================================================================================================
Total: 3 MOs
Added 3 MOs to group: hget_group

Total: 0 Mos
ENB04> pget fdd celldown

=====================================================================================================
MO Attribute Value
=====================================================================================================
EUtranCellFDD=41 pmCellDownLockAuto 0
EUtranCellFDD=41 pmCellDownLockMan 0
EUtranCellFDD=41 pmCellDownUnlockMan 0
EUtranCellFDD=41 pmCellDowntimeAuto 0
EUtranCellFDD=41 pmCellDowntimeMan 292 Counter every 1 sec after Cell is down.
EUtranCellFDD=43 pmCellDowntimeMan 0
===================================================================================================
Total: 3 MOs
Statistics DATA KPI
ENB03> pmx . pmCellDowntimeAuto Count every second when Celli

s automatically blocked.
.........................
get /c/pm_data/A20110328.0445-0500:1.xml.gz
/home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.0445-
0500.1.xml.gz ... OK
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.0445-

0500.1.xml.gz | /home/Administrator/moshell/pmExtract -u "." "pmCellDowntimeAuto" |
/home/Administrator/moshell/pmXtab -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Date: 2011-03-28
Count every second when Cell is

ENB03> pmx . pmCellDowntimeMan
blocked by Operator.
.........................
gzip -dc /home/Administrator/moshell_logfiles/logs_moshell/pmfiles/10.0.0.164/pm_data/A20110328.0445-

0500.1.xml.gz | /home/Administrator/moshell/pmExtract -u "." "pmCellDowntimeMan" |
/home/Administrator/moshell/pmXtab -cols time -fmt txt -m "(?:\w+=[^,]+,){1,2}((\w+=[^,]+,*)+$)"
Date: 2011-03-28
EUtranCellFDD=31 pmCellDowntimeMan 0 EUTRAN Cell Availability
Cell Availability [%] KPI
{ ( N X M X 900 - (pmCellDowntimeAuto - pmCellDowntimeMan )) /
When you are not sure about (N X M X 900) } X 100
ENB03> pmom . pmCellDowntimeMan statistics mo, you can enter
pmom..target mo) to see the N : Reported count (4 times per hour)
description.
M : Number of cells detected
Statistics DATA
ENB03> pget IP udp

=================================================================================================
MO Attribute Value
=================================================================================================
IpAccessHostEt=1 pmUdpInDatagrams 11666
IpAccessHostEt=1 pmUdpInErrors 0
IpAccessHostEt=1 pmUdpNoPorts -2
IpAccessHostEt=1 pmUdpOutDatagrams 1410
=================================================================================================
Total: 1 MOs
ENB03> pmom . pmUdpOutDatagrams
###################################################################################################################
MO Class Pm Counter Type Flags
####################################################################################################################
IpAccessHostEt pmUdpOutDatagrams long PEG,ropReset
------------------------------------------------------------------------------------------------------------------------------------
Inactivity timer
ENB03> get . inac

===========================================================================
MO Attribute Value
===========================================================================
ConfigurationVersion=1 currentMainActivity 0 (IDLE)
Rcs=1 tInactivityTimer 0
===========================================================================
Total: 2 MOs
ENB02> set Rcs=1 tInactivityTimer 120

Set tInactivityTimer on following 1 MOs ?
============================================================================
794 ENodeBFunction=1,Rcs=1
============================================================================
!! Warning: the new value is not according to recommended value !!
New value = 120, Recommended value = 61
Set tInactivityTimer on 1 MOs. Are you Sure [y/n] ? y
============================================================================
Id MO tInactivityTimer Result
============================================================================
794 Rcs=1 120 >>> Set.
============================================================================
Total: 1 MOs attempted, 1 MOs set
ENB02>
Check Upgrade
ENB03> get upgr stat

===================================================================================
MO Attribute Value
===================================================================================
UpgradePackage=Virtual_1_of_CXP102051/12_R7AK state 4 (ONLY_DELETEABLE)
UpgradePackage=Virtual_2_of_CXP102051/10_R5EA state 4 (ONLY_DELETEABLE)
UpgradePackage=Virtual_0_of_CXP102051/12_R8AA state 4 (ONLY_DELETEABLE)
UpgradePackage=InitialUP state 4 (ONLY_DELETEABLE)
UpgradePackage=R9AS state 7 (UPGRADE_COMPLETED)
UpgradePackage=R9BE%2 state 7 (UPGRADE_COMPLETED)
====================================================================================
Total: 6 Mos
ENB03> pr upgrade

===================================================================================
Proxy MO
===================================================================================
105 SwManagement=1,UpgradeTrace=1
129 SwManagement=1,Repertoire=CPP_Int_Tran_Upgrade_2
184 SwManagement=1,UpgradePackage=InitialUP
223 SwManagement=1,Repertoire=CPP_Control_Upgrade_4
261 SwManagement=1,UpgradePackage=R9BE%2
339 SwManagement=1,Repertoire=CPP_IP_Tran_Upgrade_4
===================================================================================
Total: 6 MOs
Change Directory in AMOS
ENB03> cd /c/
$ cd /c/
ENB03> ls
$ ls
Directory '/c/'
configuration
java
license
loadmodules
loadmodules_norepl
node_id
public_html
security
systemfiles
tmp
up
logfiles
pm_data
pmd
usr
pi_data
ENB03> cd /d/
$ cd /d/
ENB03> ls
$ ls
Directory '/d/'
configuration
loadmodules
systemfiles
usr
cv.bak
cv.ptr
rollbacklst.bak
rollback.ini
rollback.lst
nss_tum_data
IPsecTrustedCerts
ftp
ran4_ETM32_10MHz.cfg
ran4_ETM33_10MHz.cfg
$ /home/Administrator/moshell/commonjars/connect: connection timed out
$

Moshell Commands

Uploaded by

Copyright:

Available Formats

Moshell Commands

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Moshell Commands

Uploaded by

Copyright:

Available Formats

Moshell (Basic command)

110328-16:10:46 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/2764

[~]$ moshell 169.254.1.10

HELP MENU :h 1. Have laptop setting same as left.

110323-21:50:44 169.254.1.10 8.0r stopfile=/tmp/2920

Connected to 169.254.1.10 (SubNetwork=ONRM_ROOT_MO_R,SubNetwork=TEST,MeContext=ENB04,ManagedElement=1)

Parameter 1 of 3, restartRank (enumRef-RestartRank):

Parameter 2 of 3, restartReason (enumRef-RestartReason):

Parameter 3 of 3, restartInfo (string): 0

eNB3> lst mme To check MME status

110310-16:38:07 10.0.0.164 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/4728

eNB3> get mme ipaddress

MME Node addition method

ENB03> st cell Check Cell status.

ENB03> lk fdd eNB3> lh ru vii

110328-22:03:50 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/1056

110328-22:04:03 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/1056

110328-17:28:17 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/464

ENB03> diff 854 879

110328-17:28:26 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/464

110328-17:28:26 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/464

110328-16:46:20 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/2764

110328-16:56:25 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/464

ENB03> get . tac

110329-15:36:22 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/3924

ENB04> eset1 EUtranCellFDD tac 4

110303-09:38:35 10.0.0.165 8.0r ERBS_NODE_MODEL_B_1_30_COMPLETE stopfile=/tmp/2136

ENB04> get . earfcn Check frequency allocation

set EUtranCellFDD earfcnul 21400

LGU+ Center Freq

set EUtranCellFDD earfcnul 20600

Attribute 1 of 8, earfcndl (long): 3400

ENB02> get . ntp

110323-19:34:48 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/884

ENB04> get 1 Check time Data

Laptop time (2011.03.22 16:49:25)

110323-16:49:25 10.0.0.165 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/1000

eNB time (2011.03.23 07:49:12)

ENB02> ue print -admitted Command to check how many calls are in

ENB03> ue print -ue -allcell

110329-17:02:46 10.0.0.164 8.0r ERBS_NODE_MODEL_B_1_40_COMPLETE stopfile=/tmp/3224

$ /home/Administrator/moshell/commonjars/connect: connection timed out

egr_sid: laid | ipDA | teid | status

ENB02> appsh data gtp 21

ENB02> appsh data gtp 22

ENB02> get . term Inter eNB connection information for X2

ENB02> get . relation Inter cell information for X2 Handover

ENB02> get . external eNB information for Handover

110323-11:00:53 10.0.0.163 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/3220

110322-22:15:54 10.0.0.163 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/4500

10.0.0.164> get . vid

110330-18:00:18 10.0.0.164 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/6012

110329-15:05:39 10.0.0.163 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/3652

110329-15:05:51 10.0.0.163 8.0r ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/3652

Check O&M IP address

110110-18:33:56 10.0.0.162 8.0n ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/5096

110110-18:33:56 10.0.0.162 8.0n ERBS_NODE_MODEL_A_9_53_COMPLETE stopfile=/tmp/5096

110323-20:16:29 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/2260

ENB02> lhsh BXP_2_1 warpA read DL_PM_PA0_C0

110323-20:17:07 169.254.1.10 8.0r ERBS_NODE_MODEL_B_1_40 stopfile=/tmp/2260