ISO 17025:2007

LABORATORY MANAGEMENT SYSTEM

 ISO 17025
ISO / IEC 17025 : 2005

Interpretation of Standard Requirements

 ISO 17025
ISO / IEC 17025 : 2005

• Management Requirements
• Technical Requirements
 Contents of ISO / IEC 17025 : 2005
ISO / IEC 17025 : 2005

1. Scope
2. Normative References
3. Terms and Definitions
4. Management Requirements
5. Technical Requirements
 1. SCOPE
 Specifies requirements applicable to Testing /
ISO / IEC 17025 : 2005

Calibration laboratories
 Notes given in the standard are for guidance and
do not contain requirements
 Standard is meant for use by laboratories,
Customers, accreditation bodies etc.
 Compliance with the regulatory and safety
requirements are not covered by the standard
 Compliance with this standard ensures
compliance with ISO 9001:2000
 2. NORMATIVE REFERENCES
 ISO 9001 :2000 Quality Management System
ISO / IEC 17025 : 2005

 ISO / IEC Guide 2 : General terms and their

definitions concerning standardization
 VIM: International Vocabulary of basic and
general terms in metrology
 3. TERMS AND DEFINITIONS
ISO / IEC 17025 : 2005

 Terms given in ISO/ IEC guide 2 and VIM

are applicable
 4. MANAGEMENT REQUIREMENTS
4.1 Organization
ISO / IEC 17025 : 2005

4.2 Management System

4.3 Document control
4.4 Review of requests, tenders and contracts
4.5 Subcontracting of tests and calibrations
4.6 Purchasing services and supplies
4.7 Service to Customer
4.8 Complaints
 4. MANAGEMENT REQUIREMENTS –contd.
ISO / IEC 17025 : 2005

4.9 Control of non-conforming testing/ calibration

4.10 Improvement
4.11 Corrective actions
4.12 Preventive actions
4.13 Control of records
4.14 Internal audits
4.15 Management reviews
 4.1 ORGANIZATION
4.1.1 Laboratory / organization shall be an
ISO / IEC 17025 : 2005

entity that can be held legally responsible

4.1.2 Laboratory to carry out activities to meet the
requirements of this standard, Customers,
regulatory authorities and organizations
providing recognition
4.1.3 Management system to cover permanent,
temporary and mobile facilities
4.1.4 If laboratory is part of an organization
having different activities, responsibility of
key personnel shall be defined
 4.1.5 The laboratory shall have
a) Managerial and technical personnel
b) Policies and procedures to ensure personnel are
free from undue pressures
ISO / IEC 17025 : 2005

c) Policies and procedures to ensure protection of

Customer’s confidential information
d) Policies and procedures to avoid involvement in
any activities that would diminish confidence
e) Defined management structure
f) Defined authority and responsibility and inter-
relationship of personnel
g) Adequate supervision of testing / calibration staff
h) Technical management
i) Appointment of Quality Manger
j) Deputies for key Management personnel
 4.2 Management System
4.2.1 Establish, maintain and implement Quality
System appropriate to the scope of activities
ISO / IEC 17025 : 2005

4.2.2 Management System Policies and Objectives

shall be defined in Quality Manual. Quality
Policy shall be issued under the authority of
chief executive and shall Contain
a) Commitment to good professional practices
b) Statement of laboratory’s service
c) Objectives of Management System
d) Requirement that personnel concerned get
familiarized with Management System
e) Commitment to comply with ISO/IEC 17025:2005
 4.2.3 Quality Manual shall include / refer to
supporting procedures and outline structure
ISO / IEC 17025 : 2005

of Management System

4.2.4 Defined responsibility and authority of

technical management and Quality Manager
 4.3 DOCUMENT CONTROL
4.3.1 GENERAL
Procedure for Document Control, covering
documents of internal and external origin
ISO / IEC 17025 : 2005

4.3.2 DOCUMENT APPROVAL AND ISSUE

4.3.2.1 Approval of Documents by authorized
personnel. Maintenance of Master List
4.3.2.2 The procedure shall ensure that
a) Availability of authorized appropriate documents
b) Periodic review and revision as needed
c) Removal of obsolete/ invalid documents
d) Suitable identification of obsolete document
retained for knowledge/ legal purposes
4.3.2.3 Unique identification: date. Revision status,
page number and number pages
 4.3.3 DOCUMENT CHANGES
4.3.3.1 Approval of changes by the same agency as
original issue or authorized otherwise
ISO / IEC 17025 : 2005

4.3.3.2 Identification of changes either on the

document or on attachments
4.3.3.3 If manual corrections are permitted define the
same in the procedure
4.3.3.4 If documents are maintained on computer
memory define the controls
 4.4 REVIEW OF REQUESTS, TENDERS AND
CONTRACTS
ISO / IEC 17025 : 2005

4.4.1 Establish and maintain documented procedure

for review of requests, tenders and contracts for
testing / calibration. The procedure shall cover
a) Ensure that the requirements are adequately
defined, documented and understood
b) Laboratory has the capability and resources to
meet the requirements
c) Selection of appropriate test/ calibration method.
Resolution of differences between contract and
tender, if any
 4.4.2 Maintenance of records of review
4.4.3 Review also to cover sub-contracted work
ISO / IEC 17025 : 2005

4.4.4 Customer to be informed any deviation

4.4.5 Amendments to a contract shall also to be
reviewed and communicated
 4.5 SUBCONTRACTING OF TESTS AND
CALIBRATIONS
ISO / IEC 17025 : 2005

4.5.1 If laboratory sub-contracts the work, this

shall be done on suitable subcontractors:
satisfying the requirements of this standard
4.5.2 Information to Customer on such
arrangement
4.5.3 Laboratory shall be responsible for
subcontractor’s work
4.5.4 Maintenance of register of subcontractors
 4.6 PURCHASING SERVICES AND SUPPLIES
4.6.1 Procedure for selection and purchasing of
services and supplies that affect quality of
ISO / IEC 17025 : 2005

tests/ calibration
4.6.2 Use of purchased materials only after
inspection / verification
4.6.3 Review and approval of purchase documents
before release
4.6.4 Evaluation of suppliers and maintenance of
records ( for critical materials)
ISO / IEC 17025 : 2005

4.7 SERVICE TO Customer

Laboratory shall afford Customer cooperation to
clarify Customer’s request and monitor
performance of laboratory in relation to work
performed and protect confidentiality of other
Customers
ISO / IEC 17025 : 2005

4.8 COMPLAINTS
 Procedure for resolution of complaints from
Customers and other parties
 Maintenance of Records of Complaints
 4.9 CONTROL OF NONCONFORMING
TESTING/ CALIBRATION
ISO / IEC 17025 : 2005

4.9.1 Procedure for dealing with nonconforming

testing/ calibration. The procedure shall ensure
a) Authority for management of nonconforming
work to be defined
b) Evaluation of nonconforming work
c) Notification to Customer, if needed
d) Defined responsibility for resumption of work
4.9.2 In case of possibility of recurrence , initiation of
suitable corrective action
 4.10 Improvement
ISO / IEC 17025 : 2005

The laboratory shall continually improve the

effectiveness of its management system through the
use of the quality policy, quality objectives, audit
results, analysis of data, corrective and preventive
actions and management review.
 4.11 CORRECTIVE ACTION
4.11.1 Procedure for implementing Corrective Action
ISO / IEC 17025 : 2005

4.11.2 Cause Analysis - Investigation of root cause

4.11.3 Selection and implementation of Corrective
Action
 Selection and implementation of most suitable
Corrective Action
 Document and implement any changes as result
of Corrective Action
4.11.4 Monitoring of Corrective Action
4.11.5 Additional Audits, where needed
ISO / IEC 17025 : 2005

4.12 PREVENTIVE ACTION

4.12.1 Identification and implementation of
Preventive Actions
4.12.2 Procedure for Preventive Action shall
include initiation and control
 4.13 CONTROL OF RECORDS
ISO / IEC 17025 : 2005

4.13.1 GENERAL
4.13..1.1 Procedure for Quality and Technical
Records (identification, collection, indexing,
access filing, storage, maintenance and
disposal )
4.13.1.2 Records shall be legible
4.13.1.3 Security of records
4.13.1.4 Procedure for protection and back-up
 4.13.2 TECHNICAL REPORTS
ISO / IEC 17025 : 2005

4.13.2.1 Records of original observations, derived

data and personnel responsible for checking
4.13.2.2 Observations, data and conclusions shall be
made when they are made
4.13.2.3 When mistakes occur the changes are entered
after crossing the original observation; not by
erasing
 4.14 INTERNAL AUDITS
4.14.1 Internal Audits as per predetermined
schedule and procedure
ISO / IEC 17025 : 2005

* All elements of Management System shall be

covered
Quality Manager to ensure conducting audits
* Audits by qualified and trained personnel, if
possible independent of the area being audited
Cycle time for audits is usually 1 year
4.14.2 Timely corrective action and notification to
Customer, if needed
4.14.3 Records of Internal Audits
4.14.4 Follow up audit to verify effectiveness of
corrective actions
 4.15 MANAGEMENT REVIEWS
4.15.1 Predetermined procedure and schedule for
Management review. The review shall cover
 Suitability of policies and procedures
ISO / IEC 17025 : 2005

 Reports from Management and supervisors

 Outcome of Internal Audits
 Corrective and Preventive actions
 Assessment by external agencies
 Inter-laboratory comparisons/ proficiency testing
 Changes in volume and type of work
 Customer feedback / complaints

4.15.2 Records of Management Review and follow

up for actions
ISO / IEC 17025 : 2005

Technical Requirements
 5. TECHNICAL REQUIREMENTS
5.1 General
5.2 Personnel
ISO / IEC 17025 : 2005

5.3 Accommodation and environmental conditions

5.4 Test and calibration methods and method
validation
5.5 Equipment
5.6 Measurement traceability
5.7 Sampling
5.8 Handling of test and calibration items
5.9 Assuring quality of test and calibration results
5.10 Reporting the results
ISO / IEC 17025 : 2005

5.1 GENERAL
5.1.1 Factors affecting calibration / Test results
5.1.2 All these shall be taken into account while
developing procedures, selection of equipment
and training of personnel
 5.2 PERSONNEL
5.2.1 Personnel performing specific tasks shall be
qualified on the basis of education, training,
experience and skills
ISO / IEC 17025 : 2005

5.2.2 Policy and procedure for identifying training

needs and providing training
5.2.3 Ensure that contracted personnel work in
accordance with laboratory’s Management
System
5.2.4 Maintenance of job description of technical,
managerial and key personnel
5.2.5 Authorization for sampling, testing/ Calibration.
Issue of certificates, interpretations/ opinions,
operation of particular equipment
Maintenance of Records of qualifications, training
and skills of personnel
 5.3 ACCOMMODATION AND
ENVIRONMENTAL CONDITIONS
ISO / IEC 17025 : 2005

5.3.1 Technical requirements of accommodation and

environmental conditions affecting testing/
calibration shall be documented and controlled
5.3.2 Monitor, control and record environmental
conditions
5.3.3 Effective separation between neighboring
areas
5.3.4 Controlled access to testing/ calibration areas
5.3.5 Good housekeeping
 5.4 TEST AND CALIBRATION METHODS
AND METHOD VALIDATION
5.4.1 GENERAL
 Use of appropriate methods for tests /
ISO / IEC 17025 : 2005

calibration
 These include sampling, transport, storage,
estimation of uncertainty etc.
 Availability of up to date instructions,
standards, manuals and data at work places

5.4.2 SELECTION OF METHODS

 Use of published methods/ procedures
 Use of validated laboratory developed methods
 Information to Customer when Customer
suggested method is inappropriate
 5.4.3 LABORATORY DEVELOPED METHODS
 Plan for development of test/ calibration
ISO / IEC 17025 : 2005

methods
 Assignment of activity to qualified personnel
 Updating of plan as the development proceeds

5.4.4 NON-STANDARD METHODS

 Use of non-standard method is subject to
agreement by Customer
 Validation of such methods before use
 5.4.5 VALIDATION OF METHODS
5.4.5.1 Validation is the confirmation by
ISO / IEC 17025 : 2005

examination and provision of objective

evidence for suitability
5.4.5.2 Validation of non-standard, laboratory
developed methods. Maintenance of
records of validation
5.4.5.3 Range and accuracy obtainable from
validation methods to suit Customer’s
needs
 5.4.6 ESTIMATION OF UNCERTAINTY OF
MEASUREMENT
5.4.6.1 Procedure for estimation of uncertainty of
measurement in all calibrations
ISO / IEC 17025 : 2005

5.4.6.2 Procedure for estimation of uncertainty of

measurement in testing, to the extent possible
using statistical methods
5.4.6.3 Consideration to all components in uncertainty
estimation
5.4.7 CONTROL OF DATA
5.4.7.1 Checks on calculations and data transfers
5.4.7.2 Suitable controls when data is acquired and
processed through computers or automated
equipment
 5.5 EQUIPMENT
5.5.1 Availability of necessary equipment
5.5.2 Equipment and software shall be suitable
ISO / IEC 17025 : 2005

for achieving the required accuracy.

Establishment of calibration programme
5.5.3 Operation by authorized personnel using
up to date instructions
5.5.4 Unique identification of each item of
equipment
5.5.5 Maintenance of records of equipment
5.5.6 Procedures for safe handling, transport,
storage, use and planned maintenance
 5.5.7 Removal from service subjected to
overloading/ mishandling. Use of such
equipment only after checking or calibration
after repair
ISO / IEC 17025 : 2005

5.5.8 Indication of calibration status on the equipment

5.5.9 When an equipment goes outside the control
of the laboratory, checking calibration
validity before reuse
5.5.10 Intermediate checks as per defined procedure
5.5.11 Procedure to ensure application of correction
factors where needed
5.5.12 Safeguarding equipment against unintentional
adjustments
 5.6 MEASUREMENT TRACEABILITY
5.6.1 GENERAL
 Calibration of equipment before use
 A programme for calibration
ISO / IEC 17025 : 2005

5.6.2 SPECIFIC REQUIREMENTS

5.6.2.1 Calibration
5.6.2.1.1 Calibrations traceable to International
System of Units (SI Units)
5.6.2.1.2 Where there is no possibility of use of SI
units, establishment of measurement
traceability through
 Use of certified materials and specified methods
 Inter-laboratory comparisons
 5.6.3 REFERENCE STANDARDS AND MATERIALS
5.6.3.1 Reference Standards
 Programme for calibration of reference
Standards
ISO / IEC 17025 : 2005

 Use only for calibrations

 Calibration before after adjustments, if any
5.6.3.2 Reference Materials
 Reference Materials traceable to SI units,
wherever possible
5.6.3.3 Intermediate Checks
 Intermediate checks as per defined procedures
and schedules
5.6.3.4 Transport and Storage
 Procedures for safe handling of reference
materials, reference standards
 5.7 SAMPLING
5.7.1 Sampling Plan / procedure for sampling where
ISO / IEC 17025 : 2005

needed. This shall be based on appropriate

statistical techniques, where possible
5.7.2 Where Customer wants deviation to the
procedure
necessary details shall be included in all
documents related to testing/ calibration
5.7.3 Procedures for recording relevant data on
sampling carried out
 5.8 HANDLING OF TEST AND CALIBRATION
ITEMS
5.8.1 Procedure for transportation, receipt, handling,
ISO / IEC 17025 : 2005

protection, storage, retention and disposal of

items received for testing/ calibration
5.8.2 A system/ procedure for identification of test/
calibration items
5.8.3 Recording abnormalities of items, if any and
consultation with the Customer for necessary
further instructions/ action
5.8.4 Procedure for avoiding deterioration during
handling, storage and preparation
 5.9 ASSURING THE QUALITY OF TEST AND
CALIBRATION RESULTS
 Use of quality control procedures for monitoring
ISO / IEC 17025 : 2005

the validity of test/ calibrations

 Monitoring may include, but not limited to
a) Use of certified materials
b) Participation in inter-laboratory comparisons/
proficiency testing
c) Replicate testing
d) Re-testing / re-calibration of retained items
e) Correlation of results for different characteristics
 5.10 REPORTING THE RESULTS
5.10.1 GENERAL
ISO / IEC 17025 : 2005

 Reporting the results clearly and objectively in a

Test / Calibration Report form
 In case of internal Customer or special
agreement with Customer the results may be
reported in a simplified way; however complete
information (listed in 5.10.2 – 5.10.4) shall be
maintained by the laboratory
 5.10.2 TEST AND CALIBRATION CERTIFICATES
 Test Report/ Calibration Certificate shall contain
a) Title (Test Report/ Calibration Certificate)
b) Name & address of the laboratory
ISO / IEC 17025 : 2005

c) Unique identification (like serial number)

d) Name & address of the Customer
e) Identification of Test Method
f) Condition & identification of Test/ Calibration item
g) Date of receipt & date of test/ calibration
h) Reference to sampling plan, if any
i) Test/ calibration results
j) Name & designation of persons authorizing report
k) A statement to the effect that the results relate to
only the items tested/ calibrated
 5.10.3 TEST REPORTS
5.10.3.1 In addition to the above (5.10.2) Test Reports
shall contain
ISO / IEC 17025 : 2005

a) Deviations from Test Procedures & environmental

conditions, if applicable
b) Statement of compliance / non-compliance, if
relevant
c) Statement of estimated uncertainty
d) Opinions/ interpretations, if applicable
e) Additional information required by Customer
5.10.3.2 Where sampling is applicable details of date,
method, environmental conditions etc. shall
be included
 5.10.4 CALIBRATION CERTIFICATE
5.10.4.1 In addition to the details given in 5.10.2
Calibration Certificates shall include
ISO / IEC 17025 : 2005

a) Environmental conditions, if applicable

b) Uncertainty of measurement
c) Evidence measurement traceability
5.10.4.2 Statement of compliance shall include
which parameters of specification are met /
not met
5.10.4.3 Any adjustments/ repairs carried out shall
be reported
5.10.4.4 No recommendation on calibration interval
 5.10.5 OPINIONS AND INTERPRETATIONS
 Document the basis of giving opinions/
interpretations
ISO / IEC 17025 : 2005

 Clear marking of the same in the reports

5.10.6 TESTING/ CALIBRATION RESULTS FROM
SUBCONTRACTORS
 Clear identification of results from subcontractor
5.10.7 ELECTRONIC TRANSMISSION OF RESULTS
 Necessary controls to protect confidentiality
while transmitting results by electronic media
like fax, telephone etc
 5.10.8 FORMAT OF REPORTS/ CERTIFICATES

ISO / IEC 17025 : 2005

Suitable format for test/ calibration report/

certificate to avoid misunderstanding
5.10.9 AMENDMENTS TO TEST REPORTS AND
CALIBRATION CERTIFICATES
 Material amendments to test/ calibration reports
through a further report, giving reference to
earlier report
 Amendments shall meet this international
standard