Scribd
Upload
38 views

Engineering Graphics 1E7: Lecture 2: Basic Construction

The document provides instructions for various techniques for drawing lines and curves in engineering graphics, including: drawing parallel and perpendicular lines; bisecting a line and angle; dividing a line into multiple sections; finding the center of an arc; inscribing and circumscribing circles in triangles; drawing hexagons and ellipses; and defining and drawing cycloids, epicycloids, involutes, Archimedean spirals.

Uploaded by

burhan
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
38 views

Engineering Graphics 1E7: Lecture 2: Basic Construction

The document provides instructions for various techniques for drawing lines and curves in engineering graphics, including: drawing parallel and perpendicular lines; bisecting a line and angle; dividing a line into multiple sections; finding the center of an arc; inscribing and circumscribing circles in triangles; drawing hexagons and ellipses; and defining and drawing cycloids, epicycloids, involutes, Archimedean spirals.

Uploaded by

burhan
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 21

Lecture 2 Tuesday 28 November 2017 1

ENGINEERING GRAPHICS
1E7

Lecture 2: Basic Construction


Lecture 2 Tuesday 28 November 2017 2
DRAWING LINES

Drawing Parallel Lines


Lecture 2 Tuesday 28 November 2017 3
DRAWING LINES

Drawing Perpendicular Lines


Lecture 2 Tuesday 28 November 2017 4
DRAWING LINES

Bisection of A Line A B

1. Place your compass point on A and stretch the compass


MORE THAN half way to point B.
2. With this length, swing a large arc that will go BOTH
above and below segment AB.
3. Without changing the span on the compass, place the
compass point on B and swing the arc again. The new arc
should intersect the previous one above and below the
segment AB.
4. With your scale/ruler, connect the two points of
intersection with a straight line.
5. This new straight line bisects segment AB. Label the point
where the new line and AB cross as C.

6. Segment AB has now been bisected and AC = CB.


Lecture 2 Tuesday 28 November 2017 5
DRAWING LINES

Divide A Line into Multiple Sections


1. From one end of the given line AB (say, A) draw a line AC at
a convenient angle
2. Using a scale/ruler divide the BC into the required number of
parts making them of any suitable length.
3. Join the last point on line AC (say, C) to B
4. Draw construction lines through the other points on the line
AB which are parallel to CB
Lecture 2 Tuesday 28 November 2017 6
DRAWING LINES

Bisection of An Angle
1. Place the point of the compass on the vertex of angle BAC
(point A).
2. Stretch the compass to any length so long as it stays ON
the angle.
3. Swing an arc with the pencil that crosses both sides of
angle ABC. This will create two intersection points (E and
F) with the sides of the angle.
4. Place the compass point on E, stretch your compass to a
sufficient length and draw another arc inside the angle -
you do not need to cross the sides of the angle.
5. Without changing the width of the compass, place the
point of the compass on F and make a similar arc. These
two small arcs in the interior of the angle should be
crossing each other.
6. Connect the point of intersection of the two small arcs to
the vertex A of the angle with a straight line.
Lecture 2 Tuesday 28 November 2017 7
DRAWING LINES

Find the Centre of an Arc


1. Select three points A, B and C on the arc and join AB and BC
2. Bisect AB and BC.
3. Fine the intersection point of the bisecting lines/bisectors.
That is the centre of the arc.
Lecture 2 Tuesday 28 November 2017 8
DRAWING LINES

Inscribe a Circle in a Triangle


1. Bisect angle ABC and angle BAC.
2. Fine the intersection point of the bisecting lines/bisectors.
That is the centre of the circle.
3. The radius of the circle is the length of a perpendicular line
on any of the sides of the triangle drawn from the centre of
the circle.
Lecture 2 Tuesday 28 November 2017 9
DRAWING LINES

Circumscribe a Circle on a Triangle

1. Bisect sides AC and BC.


2. Fine the intersection point
of the bisecting
lines/bisectors. That is the
centre of the circle.
3. The radius of the circle is
the length of a line joining
any one of the vertices of
the triangle to the centre
of the circle.
Lecture 2 Tuesday 28 November 2017 10
DRAWING LINES

Draw a Hexagon

To draw a regular
hexagon given the
distance across flats
Draw a circle having a
diameter equal to the
distance across flats.
Draw tangents to this
circle with a 60 set
square to produce the
hexagon.
Lecture 2 Tuesday 28 November 2017 11
DRAWING LINES

Draw a Hexagon

To draw a regular
hexagon given the
distance across
corners, draw a circle
having a diameter
equal to the distance
across corners
Step off the radius
round it to give six
equally spaced points.
Join these points to
form the hexagon.
Lecture 2 Tuesday 28 November 2017 12

Ellipse Construction

1. Draw the axes AB and CD and draw circles (called auxiliary circles) on
them as diameters.
2. Divide the circles into a number of equal parts, by radial lines through O.
Each of the radial lines intersect the major and minor auxiliary circle.
3. Through the points where radial lines cut the major auxiliary circles drop
vertical perpendiculars, and through the points where the radial lines cut
the minor auxiliary circle draw horizontals to cut the verticals. These
intersections are points on the ellipse.
Lecture 2 Tuesday 28 November 2017 13

CYCLOID

The cycloid is the locus of a point on


the rim of a circle rolling along a
straight line.
Lecture 2 Tuesday 28 November 2017 14

HYPOCYCLOID

The curve produced by fixed point P


on the circumference of a small circle
of radius a rolling around the inside
of a large circle of radius b.
Lecture 2 Tuesday 28 November 2017 15

EPICYCLOID

The path traced out by a point P on the


edge of a circle of radius a rolling on the
outside of a circle of radius b.
Lecture 2 Tuesday 28 November 2017 16

Involute of a line (AB):

A B C
Lecture 2 Tuesday 28 November 2017 17

What is an involute ??
Attach a string to a point on a curve.

Make the string a tangent to the curve at


the point of attachment.

Then wind the string up, keeping it always


taut. The locus of points traced out by the
end of the string is called the involute of
the original curve.

The original curve is called the evolute of


its involute.
Lecture 2 Tuesday 28 November 2017 18

Example: Circle
Lecture 2 Tuesday 28 November 2017 19

Example: Triangle
Lecture 2 Tuesday 28 November 2017 20

Archimedean Spiral

Spiral of Archimedes is a spiral with


polar equation
Lecture 2 Tuesday 28 November 2017 21

Try this!

You might also like