Scribd
Upload
39 views19 pages

Operating Manual

1. Connect the phone to the computer via USB cable and open the flashing tool program. 2. Select the necessary files, scatter file, and CHECKSUM file from the update package folders. 3. With the phone connected and volume up button held, start the port scan process and wait for it to complete before clicking stop all. 4. Select the options to start the flashing process, disconnect and reconnect the phone, and start all again to flash the software update files to the phone.

Uploaded by

Alberto Martinez Fernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
39 views19 pages

Operating Manual

1. Connect the phone to the computer via USB cable and open the flashing tool program. 2. Select the necessary files, scatter file, and CHECKSUM file from the update package folders. 3. With the phone connected and volume up button held, start the port scan process and wait for it to complete before clicking stop all. 4. Select the options to start the flashing process, disconnect and reconnect the phone, and start all again to flash the software update files to the phone.

Uploaded by

Alberto Martinez Fernandez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 19

1st Step.

Connect the phones USB cable to


the computer.
Double click the icon to enter the program.
Click on the icon to enter TOOLs
interface.
Select necessary files like in the
picture
Select MTK_AllInOne_DA.bin

Click on Setup data source
file.
Select MTK_DATABASE.mdb
Click on Scatter File and in the update package android5.0 update
packageselect the file MT6592\MT6582\MT6572_Android_scatter
If the error message in the picture were to appear, create the CHECK SUM file with the software
MT6592\MT6582\MT6572_Android_scatter
In the folder (Executable file), copy CheckSum_Gen to the decompressed
update package. Double click on CheckSum_Gen and press enter.
The configuration is inmediate
NOT turned on, hold on the phones volume up button
and the power button then connect the phone to the
computer with the USB and keep the buttons pressed
till the scan is completed.
Wait until the software scan starts
automatically, keep volume up button
pressed.
Port scan, port scan is successful as illustrated in the picture (all the port used
by the computer will be scanned)

When scanning ports, user must press for a long time the volume up button,
One the port scan is over, click on
STOP ALL
Once the port scan is over, the user can directly click on STOP ALL, in follow-up
updates, there is no need to do port scan.
Select the two options marked
in red.
When scanning ports, press stop all, like in the picture, please pay attention to
the marginal notes on the picture.
Click on Start all, select yes on the
the error message, disconnect the
phones USB.
Press Star all, like in the picture, check ok the ports that have been scanned
successfully, uncheck the ones that haven't.
When the interface is like in the picture shown
below, connect the phone to the computer
again, and press START ALL again.
not disconnect the cable.
Press START ALL, when downloading, long press volume up, (wait 3-5
second after the red bar is filled) not need to keep it press while is
downloading.
If installation is successful, the interface
will show the following aspect,

You might also like