Introduction

CE 244
MATERIALS OF CONSTRUCTION
Course Objectives
To develop a basic understanding of key

material properties, requirements, and related
behavior characteristics of typical construction
materials.
Course Content
Types
Production methods
Uses in construction
Properties and related tests of the following
materials of construction:
Building Stones Cements
Metals Mineral Aggregates
Clay Products Concrete
Gypsum
Lime
Course Content
These materials are used in all civil engineering
structures such as;
- buildings
- bridges
- highways
- railways
- tunnels
- dams
- harbor structures
- towers
etc.
CLASSIFICATION OF CIVIL
ENGINEERING MATERIALS
1. According to their phases
2. According to their internal structure &

chemical composition
Phase Classification
1. Gases : Air, oxygen, CO2
2. Liquids : Water, chemical admixtures
3. Semi-solids : Fresh pastes, mortars, asphalt
4. Solids : Metals, hardened concrete

Internal Structure & Chemical
Composition Classification
1. Metals : (formed by metallic bonds)
A. Ferrous (iron, cast iron, steel)
B. Non-ferrous (aluminum, copper, zinc, lead)
2. Polymers : (long chains having molecules of C, H, O,

N which are formed by covalent bonding. The chains are
bound to each other either by covalent bonds or Van der
Waals forces.)
A. Natural (rubber, asphalt, resins, wood)
B. Artificial (plastics)
3. Ceramics : (mainly aluminosilicates formed by mixed
bonding, covalent and ionic)
A. Structural clay products (bricks, tiles, pipes)
B. Porcelains
4. Composite Materials :
A. Natural (agglomerates)
B. Artificial (Portland cement, concrete)
5. Reinforced Composite Materials : (reinforced
concrete, reinforced plastics)
One of the most important tasks of an

engineer is to select the most suitable
material for a given civil engineering
structure.
Factors Determining the Choice
of Proper Material for a Structure
Strength, rigidity & durability Requirements
Permanent loading Creep Strength
Repeated loading Fatique Strength
Impact loading Toughness & Resilience
Surface loading Hardness & Resistance to abrasion
Environmental Requirements
Temperature change coefficient of thermal expansion
Moisture movement permeability
Chemical effects chemical composition
Factors Determining the Choice
of Proper Material for a Structure
Economy. Choose the cheaper & available

materials considering
Initial cost
Useful life
Frequency of maintenance
Cost of maintenance
Salvage value
etc.
Example: Comparison of concrete
pavement vs. asphalt pavement for
economy.
Concrete Asphalt
Initial Cost +
Useful Life +
Frequency of Repair +
Cost of Repair +
Salvage Value + +
General Properties of Civil
Engineering Materials
Physical **
Mechanical **
Chemical
Other
Thermal, Acoustical, Optical, Electrical
** Most CE Applications focus on physical

& mechanical properties
Physical Properties
Properties of physical structure
density surface energy

specific gravity texture (micro, macro)
porosity other (color, thermal
permeability expansion, shape)
Mechanical Properties
Resistance to applied loads (stress)

initially & over time
stiffness tension
strength compression
fracture / yielding flexure (bending)
(brittle / ductile) torsion
direct shear
multiaxial
Chemical Properties
Chemical composition, potential

reaction with environment
oxide content
carbonate content
acidity, alkalinity
resistance to corrosion
Determining the Properties
of Civil Engineering Materials
Properties of materials are determined by
Laboratory testing
Field testing
To avoid inconsistencies in test results

STANDARDS are devised which describe
the test apparatus and the procedure.
Items that are usually
standardized in a test are:
Obtaining test specimens and number of specimens

Size and shape of the specimen
Preparation of specimens for testing
Temperature & moisture during preparation &
testing
Type of machinery
Rate of loading
Interpretation of test results
Writing a report
Standardization Institutes
Turkey - Turkish Standards Institute (TSE)
England - British Standards Institute (BSI)
Germany - Deutsche Institute Norm (DIN)
U.S. - American Society for Testing and

Materials (ASTM)
Europe - European Committee for
Standardization (CEN)
CEMENTITIOUS MATERIALS
Although there are several different
materials which have adhesive properties,
three types are of particular interest to civil
engineers.
Glues : materials of gelatinous nature
derived from vegetable or animal sources.
Bituminous Materials : complex hydrocarbon
Various Compounds of Calcium : gypsum,
lime, cements
Cementitious materials are substances
which, upon certain chemical reactions
attain binding properties
Non-hydraulic cements (gypsum and lime)
Hydraulic cements (portland cement)
Hydraulicity is that property of gaining

binding value when mixed with water and
remaining stable when exposed to water.
SPECIAL PROPERTIES OF
Fineness : Particle size.
Normal Consistency : A standard amount of water
which gives a certain fluidity to the paste.
Time of Setting : Beginning of complete loss of
plasticity.
Sand Carrying Capacity : Amount of sand that can
be added without harming plasticity
Hardening : Formation of solid phase; complete
loss of plasticity.
Yield : Volume of final product obtained in
comparison with volumes of constituent materials.

Introduction

Uploaded by

Copyright:

Available Formats

Introduction

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Introduction

Uploaded by

Copyright:

Available Formats

CE 244

To develop a basic understanding of key

2. According to their internal structure &

1. Gases : Air, oxygen, CO2

2. Liquids : Water, chemical admixtures

3. Semi-solids : Fresh pastes, mortars, asphalt

4. Solids : Metals, hardened concrete

2. Polymers : (long chains having molecules of C, H, O,

One of the most important tasks of an

Economy. Choose the cheaper & available

** Most CE Applications focus on physical

Properties of physical structure

density surface energy

Resistance to applied loads (stress)

Chemical composition, potential

To avoid inconsistencies in test results

Obtaining test specimens and number of specimens

Germany - Deutsche Institute Norm (DIN)

U.S. - American Society for Testing and

Hydraulicity is that property of gaining

You might also like