Ntps Fte Course

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 20

David Gill

Team Leader Airworthiness


Introduction to Performance and Flying
Qualities Flight Testing
Two Week Short Course May 8 19, 2006
Intended to provide practical experience in
aircraft performance, stability and control
handling qualities, flight test instrumentation
and data handling

7th Sept 2007 Aircraft Certification Unit Flight Test Engineering Course Report 2
Aircraft Certification Unit Flight Test Engineering Course Report 3
This two week short course is designed to satisfy the demand for engineers,
pilots and flight test support personnel who require practical experience in
aircraft performance, stability and control, handling qualities, flight test
instrumentation data handling, as well as a working knowledge of FAA and
military specifications pertaining to piloted aircraft.
Classroom academics are tailored to prepare the students for practical in-flight
tests. Seven flights are performed in a medium weight transport aircraft. These
aircraft have been instrumented to serve as in-flight laboratories. On each of
the sorties the students participate as flight test engineers, gathering data for
post-flight analysis. Four additional sorties are flown in light aircraft to allow
the students to give practical hands-on experience in performing the various
flight test techniques as a pilot. At the conclusion of the course, students
present their findings and recommendations on both mission suitability and
regulatory compliance in an oral report to the staff.

Aircraft Certification Unit Flight Test Engineering Course Report 4


Basically the course consisted of lectures in the morning on a
particular subject, followed by explanation of the flight test
exercise to be carried out on that subject.
Each of the two groups would then prepare their test cards for
the flight. Each group would be assigned a different aircraft
c.g. configuration.
The flight would then be undertaken with each person
recording their own results.
After the flight the data would be processed using the NTPS
programs and analysed. This was then collated and graphed,
and checked against design requirements.

Aircraft Certification Unit Flight Test Engineering Course Report 5


Test Aircraft
Swearingen Merlin III
840 shp Garrett 311-393G Turboprops

Aircraft Certification Unit Flight Test Engineering Course Report 6


Pitot-Static Calibration/Position Error Correction
(Using a trailing bomb)

Cruise Performance, CL-CD and Drag Polar


Sawtooth Climb and Level Acceleration
Longitudinal Static Stability (stick-fixed and stick-free),
and Neutral Point Determination
Manoeuvering Stability, Turns, Pull-Ups, Pushovers
Lateral/Directional Static Stability
Aircraft Dynamics and Stalls

Aircraft Certification Unit Flight Test Engineering Course Report 7


Cruise Performance
Objects:
To obtain cruise performance data and fuel
flow information for various configurations.
Determine the specific range and drag
polar for the aircraft.
Technique:
Stabilize the aircraft at the test altitude and
airspeed by using the backside
technique.
Record fuel flow, power, altitude and
airspeed, along with ambient conditions.

Aircraft Certification Unit Flight Test Engineering Course Report 8


Aircraft Certification Unit Flight Test Engineering Course Report 9
Aircraft Certification Unit Flight Test Engineering Course Report 10
The bottom of the curve shows denotes Top of curve indicates maximum range
speed for best endurance. at standard weight.
Maximum slope of curve, from origin, 99% of maximum Specific Range is the
denotes speed for maximum range. speed for long range cruise.

Aircraft Certification Unit Flight Test Engineering Course Report 11


Drag Polar extrapolates to CD0 at the y axis.
The slope of the line through the origin
indicates maximum lift-to-drag ratio.

Aircraft Certification Unit Flight Test Engineering Course Report 12


As well as the Group exercises in the Merlin all course students
had the opportunity to carry out individual hands-on flights in
the NTPS light aircraft fleet.
This was not intended to teach test pilot techniques, but to
introduce the student to the various manouevres, so they could
understand what they were asking the pilot to do.
The test exercises were:
Position error Correction
Performance
Flying Qualities
Asymmetric Power Test Techniques

Aircraft Certification Unit Flight Test Engineering Course Report 13


Left: Beech 36 Bonanza
Middle: Cessna 150
Right: Beech 76 Duchess

Aircraft Certification Unit Flight Test Engineering Course Report 14


DH.104 Dove SA226T Merlin III
Cessna 150 and 152 Turboprop DC-3
Beech 36 Bonanza Cessna 441 Conquest
Beech 76 Duchess AM-3 Bosbok
Hughes 500 MS-760 Paris
Bell OH-58 NDN-1 Firecracker
MB326 Impala Saab J35XD Draken
DHC-1 Chipmunk Piper PA-28
Cirrus SR-22
Aircraft Certification Unit Flight Test Engineering Course Report 15
Aircraft Certification Unit Flight Test Engineering Course Report 16
Aircraft Certification Unit Flight Test Engineering Course Report 17
Aircraft Certification Unit Flight Test Engineering Course Report 18
Aircraft Certification Unit Flight Test Engineering Course Report 19
Aircraft Certification Unit Flight Test Engineering Course Report 20

You might also like