Fibre Characteristics

Prof.Dr.S.Kathirrvelu
Professor-Textile Technology,
EiTEX, BDU

I M.Sc (Textile Manufacturing) - Theory of

1
Spinning
 Cotton
Cotton possesses its highest fiber quality and

best potential for spinning when the bolls are

mature and freshly opened.

The quality of baled cotton depends on many

factors including variety, weather conditions,

degree of weathering, cultural, harvesting

and storage practices, moisture and trash

content, and ginning processes.

I M.Sc (Textile Manufacturing) -
2
Theory of Spinning
 Cotton gins are responsible for converting
seed cotton into bulk cottonseed and
bales of lint.
Gins can preserve fiber quality and improve
market grade and value.
Yield and market qualities such as color,
micronaire, length and strength are
important characteristics of fiber as well as
neps, short fiber content, leaf, and seed
coat fragments.
I M.Sc (Textile Manufacturing) -
3
Theory of Spinning
 A ginner must have two objectives:

(i) to produce lint of satisfactory quality

for the growers classing and market
system, and
(ii) to gin the cotton with minimum
reduction in fiber spinning quality so that
the cotton will
meet the demands of its ultimate users,
the spinner and the consumer.
I M.Sc (Textile Manufacturing) -
4
Theory of Spinning
 A simple gin machine sequence such as a
dryer, extractor-feeder and gin stand is
required for clean cotton; however, a more
extensive machine sequence is required for
trashy cotton.
The extensive sequence of gin machinery to dry
and clean trashy cotton includes a dryer,
cylinder cleaner, stick machine, dryer,
cylinder cleaner, extractor-feeder and saw-
type gin stand followed by two stages of
saw-type lint cleaning.
I M.Sc (Textile Manufacturing) -
5
Theory of Spinning
I M.Sc (Textile Manufacturing) -
6
Theory of Spinning
I M.Sc (Textile Manufacturing) -
7
Theory of Spinning
 For stripper-harvested cotton, an additional

extractor is required. The quality of

ginned lint is directly related to the
quality of the cotton before ginning. High
grades will result from cotton from clean
fields and lower grades will result from
cotton that comes from grassy, weedy
fields.

I M.Sc (Textile Manufacturing) -

8
Theory of Spinning
 When gin machinery is used in the recommended
sequence, 75 to 85% of the foreign matter is
usually removed from cotton.
Drying cotton at high temperatures may damage
the cotton fiber. Cotton should be dried at the
lowest temperature that will produce satisfactory
market grades and allow satisfactory gin
operation.
In no case should the temperature in any portion
of the drying system exceed 177 C (350 F)
because irreversible damage may occur.
I M.Sc (Textile Manufacturing) -
9
Theory of Spinning
 Temperatures over 121 C (250 F) cause
moderate fiber damage and should not be used
if at all possible.
Adding moisture before fiber/seed separation
and lint cleaning will help maintain fiber length
and reduce the number of fibers that break in
the gin stand and lint cleaners.
The ginning process can significantly affect fiber
length, uniformity, and the content of seedcoat
fragments, trash, short fibers, and neps.
I M.Sc (Textile Manufacturing) -
10
Theory of Spinning
 Choosing the degree of gin cleaning is a
compromise between fiber trash content and
fiber quality. Lint cleaners are much more
effective in reducing the lint trash content than are
seed cotton cleaners, but lint cleaners can also
decrease fiber quality and reduce bale weight
(turnout) by discarding some good fiber with
the waste.
The best ginning practice is simply to use the
minimum machinery for a particular cotton to
achieve the optimum market grade.
I M.Sc (Textile Manufacturing) -
11
Theory of Spinning
 Gin procedures must be well planned to ensure
timely and efficient processing.

Operator and management personnel must be well

trained and skilled in all aspects of gin operations.

Gin machinery must be operated at the proper

speeds and capacities, and must be well maintained.

Moisture must be managed from harvesting through

packaging.

Cotton must not be harvested or stored at seed

cotton moisture levels above 12% wet basis.

I M.Sc (Textile Manufacturing) -

12
Theory of Spinning
I M.Sc (Textile Manufacturing) -
13
Theory of Spinning
 Fiber moisture at the gin stand should be 6

to 7%, and the fiber should be packaged at

less than 7.5% moisture.

Bales should be packaged at the proper

density and protected by high quality bale

ties and bale coverings.

Good gin operations use only the amount of

drying, moisture restoration, and cleaning

required to meet customer demands.

I M.Sc (Textile Manufacturing) -
14
Theory of Spinning
 These are a computerized process control system

that optimizes cleaning and drying called

IntelliGin (Fig. 6.13), and a prescription lint

cleaner called LouverMax (Fig. 6.14).

IntelliGin grades the cotton online at three

sensing stations and optimizes the gin process, and

increases net bale value about $8US per bale.

The LouverMax uses from 1 to 8 cleaning points

to achieve the required cleaning and reduces the

amount of good Ifiber lost

M.Sc (Textile by the
Manufacturing) - lint cleaner, and
15
Theory of Spinning
I M.Sc (Textile Manufacturing) -
16
Theory of Spinning
I M.Sc (Textile Manufacturing) -
17
Theory of Spinning
In relation to spinning, technology is concerned

with the study of the production of a yarn.

In this context the word spinning refers to the

conversion of a large quantity of individual

unordered fibers of relatively short length into a

linear, ordered product of very great length by

using

suitable machines and devices.

I M.Sc (Textile Manufacturing) -

18
Theory of Spinning
I M.Sc (Textile Manufacturing) -
19
Theory of Spinning
I M.Sc (Textile Manufacturing) -
20
Theory of Spinning
I M.Sc (Textile Manufacturing) -
21
Theory of Spinning
 Fineness is normally one of the three most
important fiber characteristics.
A multitude of fibers in the cross-section provide
not only high strength but also better distribution in
the yarn.
The fineness determines how many fibers are
present in the cross-section of a yarn of given
thickness.
Additional fibers in the cross-section provide not
only additional strength but also better evenness in
the yarn.
I M.Sc (Textile Manufacturing) -
22
Theory of Spinning
 About thirty fibers are needed at the
minimum in the yarn cross-section,
but there are usually over 100. One
hundred is approximately the lower
limit for almost all new spinning
processes.

I M.Sc (Textile Manufacturing) -

23
Theory of Spinning
Fiber fineness influences primarily:
spinning limit;
yarn strength;
yarn evenness;
yarn fullness;
drape of the fabric;
luster;
handle;
productivity of the process.
I M.Sc (Textile Manufacturing) -
24
Theory of Spinning
With the exception of wool and hair fibers, fiber fineness
cannot be specified by reference to diameter as in the
case of steel wire, because the section is seldom
circular and is thus not easily measurable. As in the
case of yarns and fibers, fineness is usually specified
by the relation of mass (weight) to length:

tex = mass (g)/length (km)

or dtex =

Whereas for man-made fibers dtex is used almost

exclusively, the Micronaire value is used worldwide for
cotton.
I M.Sc (Textile Manufacturing) -
25
Theory of Spinning
I M.Sc (Textile Manufacturing) -
26
Theory of Spinning
Cotton is a natural fiber. It grows in various

soils, in various climates, and with annually

changing cultivation conditions. The fibers

therefore cannot be homogeneous in their

characteristics, including their fineness. In

an extreme example, between 2.4 and 3.9

from bale to bale in a lot of 500 bales. Long-

staple cotton varieties are commonly finer

than medium-staple.
I M.Sc (Textile Manufacturing) -
27
Theory of Spinning
The cotton fiber consists of cell wall and lumen. The

maturity index is dependent upon the thickness of

this cell wall.

A fiber is to be considered as mature when the cell

wall of the moisture-swollen fiber represents 50 -

80 % of the round cross-section, as immature

when it represents 30 - 45 %, and as dead

when it represents less than 25 %. Since some

5 % immature fibers are present even in a fully

matured boll, cotton stock without immature fibers

I M.Sc (Textile Manufacturing) -
28
is unimaginable: the quantity is the issue. ITMF
Theory of Spinning
Immature fibers have neither adequate
strength nor adequate longitudinal
stiffness, they therefore lead to:

loss of yarn strength;

neppiness;

a high proportion of short fibers;

varying dyeability;

processing difficulties, mainly at the card.

I M.Sc (Textile Manufacturing) -
29
Theory of Spinning
Fiber length is also one of the three most
important fiber characteristics. It
influences:
spinning limit;
yarn strength;
yarn evenness;
handle of the product;
luster of the product;
yarn hairiness;
productivity.
I M.Sc (Textile Manufacturing) -
30
Theory of Spinning
I M.Sc (Textile Manufacturing) -
31
Theory of Spinning
 The fibers in the boll do not exhibit
extremely great length differences.
Noticeable shortening of many fibers arises
before the spinning process owing to
mechanical working, for example, ginning
and cleaning.
The effect is such that fiber length exhibits
the greatest irregularity of all the fiber
characteristics.
I M.Sc (Textile Manufacturing) -
32
Theory of Spinning
I M.Sc (Textile Manufacturing) -
33
Theory of Spinning
I M.Sc (Textile Manufacturing) -
34
Theory of Spinning
The rectangular staple (Fig. 3) is achievable, and
imaginable, only with man-made fibers. Since the
fibers are all equally long, no length variations
are present, and material of this

type would seem ideal.

Such an impression would be false, however. For

one thing, the length evenness cannot be
maintained into the yarn because fibers are
shortened in the spinning mill, mainly at the
cards.
I M.Sc (Textile Manufacturing) -
35
Theory of Spinning
 For another, spinning machines are
not suited to the processing of fibers
having all the same length. In the
drafting arrangement, for example,
such fibers are moved not individually
but in bunches, thereby finally
producing a high degree of
unevenness in the yarn.
I M.Sc (Textile Manufacturing) -
36
Theory of Spinning
I M.Sc (Textile Manufacturing) -
37
Theory of Spinning
The triangular staple (Fig. 4) permits better processing

than the rectangular staple, but contains too many short

fibers. During movement of fibers, for example, in the

drafting arrangement, the short fibers cannot be kept

under control; they move freely and produce substantial

unevenness. Moreover, they cannot always be bound into

the body of fibers, so that some of them are lost, thereby

producing waste and fly at the machines and devices. If a

short fiber is bound-in, however, one end often projects.

The yarn is hairy. A certain hairiness is necessary for

some product properties (e.g. knitted fabrics).

I M.Sc (Textile Manufacturing) -
38
Theory of Spinning
I M.Sc (Textile Manufacturing) -
39
Theory of Spinning
 The trapezoidal staple (Fig. 5) is the
ideal staple for processing and is
more suitable the flatter the curve is.
However, a flat curve often means a
high price. This diagram is typically
for Cotton.

I M.Sc (Textile Manufacturing) -

40
Theory of Spinning
I M.Sc (Textile Manufacturing) -
41
Theory of Spinning
If fiber materials of very different
lengths are blended in the wrong
proportions, then a stepped staple
curve (Fig. 6) can arise.

As with a rectangular staple, the fibers

can be moved only in groups, with
the same effects as mentioned
before.
I M.Sc (Textile Manufacturing) -
42
Theory of Spinning
I M.Sc (Textile Manufacturing) -
43
Theory of Spinning
 In addition to the staple diagram, the
Fibrogram (Fig. 7) is available. Whereas in
the staple diagram the fibers are aligned
at one end, in the Fibrogram they are
arranged by clamping randomly
distributed fibers of a cotton sample. The
fibers protuding from the clamps are
straightened by a brushing process
and measured optically.
I M.Sc (Textile Manufacturing) -
44
Theory of Spinning
The normal staple diagram represents an artificial picture,

which does not occur anywhere in practice, but the Fibrogram

corresponds to the arrangement of fibers at the nip line of

rollers.

It gives a good representation of the drafting operation and of

the arrangement of the fibers in the yarn. It is produced

by high volume instrumentation such as HVI. The lengths are

stated as span-lengths, that is, lengths of clamed fibers that

exceed a certain distance.

I M.Sc (Textile Manufacturing) -

45
Theory of Spinning
The specification of length

Both a parallelized, ordered bundle of fibers in the

classers hand and the real staple length derived from
it are referred to as the staple. The accurate fiber
length derived from this

is referred to as the staple diagram. Looking at the

staple diagram in Fig. 8, it is clear that various
measures of length can be derived, for example:

maximum fiber length;

minimum fiber length;

average fiber length.

I M.Sc (Textile Manufacturing) -
46
Theory of Spinning
I M.Sc (Textile Manufacturing) -
47
Theory of Spinning
The 1 % and 2.5 % span length are lengths that
are needed in setting machines, especially
roller spacings. The following length
groupings are currently used in stating the
trade staple (classers staple) for cotton:

short staple: 1 or less;

medium staple: 1 1/32 - 1 1/8;

long staple: 1 5/32 - 1 3/8;

extra-long staple: 1 13/32 and above.

I M.Sc (Textile Manufacturing) -
48
Theory of Spinning
In order to estimate how good the distribution
of length is, the following data can be used:

a second point on the Fibrogram curve

(e.g. 50 % span length derived from staple);

the coefficient of variation; or the

proportion of short fibers (e.g. percentage
diagram shorter tahn 1/2 inch); or

Uniformity Ratio (UR) from HVI

measurements.
I M.Sc (Textile Manufacturing) -
49
Theory of Spinning
Fiber elongation

Three concepts must be clearly distinguished:

permanent elongation: that part of the extension

through which the fiber does not return on relaxation;

elastic elongation: that part of the extension through

which the fiber does return on relaxation;

breaking elongation: the maximum possible

extension of the fiber until it breaks, i.e. the
permanent elongation and the elastic elongation
together.

I M.Sc (Textile Manufacturing) -

50
Theory of Spinning
The slenderness ratio (stiffness): Fiber
stiffness (Fig. 9) plays a significant
role, mainly when rolling, revolving,
and twisting movements are involved.
Slenderness ratio = Fiber length/Fiber
diameter

I M.Sc (Textile Manufacturing) -

51
Theory of Spinning
 A fiber that is too stiff has difficulty in adapting to

these movements. For example, it is not properly

bound into the yarn, produces hairiness, or is even

lost in processing. Fibers that are not stiff enough

have too little springiness. They do not return to

shape after deformation. They have no longitudinal

resistance. In most cases, this leads to the formation

of neps. Fiber stiffness is dependent upon fiber

substance and also upon the relationship between

fiber length and fiber fineness. Fibers having the

I M.Sc (Textile Manufacturing) -
52
Theory of Spinning
 Since the fibers must wind, as they are
bound-in during yarn formation in the
spinning machine, the slenderness
ratio also determines to some extent
where the fibers will finish up:

fine and / or long fibers in the core;

coarse and / or short fibers at the yarn

periphery.
I M.Sc (Textile Manufacturing) -
53
Theory of Spinning
Vegetable matter
husk portions
seed fragments
stem fragments
leaf fragments
wood fragments
Mineral material
earth
sand
ore dust picked up in transport
dust picked up in transport
I M.Sc (Textile Manufacturing) -
54
Theory of Spinning
Other foreign matter

metal fragments

cloth fragments

packing material (mostly polymer

materials)

Fiber fragments

fiber particles (which finally make up the

greater portion of the dust)
I M.Sc (Textile Manufacturing) -
55
Theory of Spinning
Metal parts can cause fires or damage card clothing. Cloth

fragments and packing material can lead to foreign fibers

in the yarn and thus to its unsuitability for the intended

application.

Vegetable matter can lead to drafting disturbances, yarn

breaks, filling-up of card clothing, contaminated yarn, etc.

Mineral matter can cause deposits, high wear rates in

machines (grinding effects, especially apparent in rotor

spinning), etc.

I M.Sc (Textile Manufacturing) -

56
Theory of Spinning
The amount of foreign material (primarily of vegetable

origin) is already taken into account in grading. Fig. 10

shows the ranges for impurities inAmerican cotton as

given in the literature of the Trtzschler company. The

scale below represents the degree of trash:

up to 1.2 % = very clean;

1.2 - 2.0 % = clean;

2.1 - 4.0 % = medium;

4.1 - 7.0 % = dirty;

7.1 % and more = very dirty.

I M.Sc (Textile Manufacturing) -

57
Theory of Spinning
I M.Sc (Textile Manufacturing) -
58
Theory of Spinning
 Neps

Neps are small entanglements or knots of fibers. In general, two types of

neps can be distinguished: fiber neps and seedcoat neps, that is, small

knots that consist only of fibers and others containing foreign particles

such as husk, seed or leaf fragments. Investigations made by Artzt and

Schreiber [11] indicate that fiber neps predominate, particularly fiber neps

having a core mainly of immature and dead fibers.

Thus it is clear that there is a relationship between maturity index [3] and

neppiness.

Neppiness is also dependent, exponentially, on fiber fineness, because

fine fibers have less longitudinal stiffness than coarser fibers. The

processing method also has a considerable influence. A large proportion of

the neps in raw cotton is produced by picking and hard ginning, and the

amount of neps is substantially increased in the blowroom.

I M.Sc (Textile Manufacturing) -
59
Theory of Spinning
 The card is the first machine to reduce the
amount of neps to a usable level, and nep
reduction at the card is achieved primarily by
disentanglement rather than by elimination.
Neps not only create disturbance in
themselves as thick places, but also in dyed
fabrics because they dye differently from the
rest of the fibers, and thus become clearly
visible in the finished cloth.

I M.Sc (Textile Manufacturing) -

60
Theory of Spinning
Based on the consolidated findings of Uster
Technologies Inc. (Zellweger Luwa AG) [28],
the following scale represents the amount
of neps per gram in 100 % cotton bales:

up to 150 = very low;

150 - 250 = low;

250 - 350 = average;

350 - 450 = high;

above 550 = very high.

I M.Sc (Textile Manufacturing) -
61
Theory of Spinning
1.7.3. Dust

Dust consists of small and microscopic particles of various substances, which

are present as suspended particles in gases and sink only slowly, so that

they can be transported in air over substantial distances. In accordance with

a classification system established by the International Committee for

Cotton Testing Methods (ITMF), the following types are to be distinguished:

PARTICLE SIZE (m)

Trash above 500

Dust 50 - 500

Microdust 15 - 50

Breathable dust below 15

A paper published by the International Textile Bulletin [4] indicates that

microdust

consists of 50 - 80 % fiber fragments, leaf.

I M.Sc (Textile Manufacturing) -
62
Theory of Spinning
I M.Sc (Textile Manufacturing) -
63
Theory of Spinning
I M.Sc (Textile Manufacturing) -
64
Theory of Spinning
THANK YOU VERY MUCH

I M.Sc (Textile Manufacturing) -

65
Theory of Spinning