On Fly Ash by Sumit Suman

Download as pptx, pdf, or txt
Download as pptx, pdf, or txt
You are on page 1of 20

SEMINAR

ON
FLY ASH

Submitted by-
SUMIT SUMAN
001410401042

1
INTRODUCTION

Any countrys economic and industrial growth depends on the


availability of power.
In India also, coal is a major source of fuel for power generation .
About 60% power is produced using coal as fuel.
Indian coal is having low calorific value(3000-3500 K cal.) & very high
ash content (30- 40%) resulting in huge quantity of ash is generated in the
coal based thermal power stations.
Over the years, ash consumption level has increased many fold.
Thus, recognizing the reutilization of fly ash is the need of the hour.

2
WHAT IS ASH ?
Ash is byproduct of coal which is produced after burning it.

It is a versatile material which can be used in a variety of applications.

3
TYPES OF ASH
Any coal based thermal power station may have the following four kinds of
ash:
Fly Ash : This kind of ash is extracted from flue gases through Electrostatic Precipitator in
dry form. This ash is fine material & possesses good pozzolanic property.
Bottom Ash : This kind of ash is collected in the bottom of boiler furnace. It is comparatively
coarse material and contains higher unburnt carbon. It possesses zero or little pozzolanic
properties.
Pond Ash : When fly ash and bottom ash or both mixed together in any proportion with the
large quantity of water to make it in slurry form and deposited in ponds wherein water gets
drained away. The deposited ash is called as pond ash.
Mound Ash : Fly ash and bottom ash or both mixed in any proportion and deposited in dry
form in the shape of a mound is termed as mound ash.

4
PROPERTIES OF FLY ASH
Chemical Composition :
The major constituents of most of the fly ashes are
1) Silica (SiO2)
2) Alumina (Al2O3)
3) Ferric Oxide (Fe2O3)
4) Calcium Oxide (CaO)
The other minor constituent of the fly ash are MgO, Na 2O, K2O, SO3, MnO,
TiO2 and unburnt carbon.
There is wide range of variation in the principal constituents - Silica (25-
60%), Alumina (10-30%) and Ferric Oxide (5-25%).

5
Physical Properties :
1) The fly ash particles are generally glassy, solid or hollow and
spherical in shape . Thus, Less water is needed which
ultimately makes the concrete stronger and reduces
particle segregation.
2) The fineness of individual fly ash particle rage from 1 micron to 1
mm size. The fineness of fly ash particles has a significant influence
on its performance in cement concrete.
3) The specific gravity of fly ash varies over a wide range of 1.9 to
2.55.
6
Pozzolanic Properties : Fly Ash is a pozzolanic material which is
defined as siliceous or siliceous and aluminous material which in itself
possesses little or no cementitious value, chemically react with
Calcium Hydroxide (lime) in presence of water at ordinary
temperature and form soluble compound comprises cementitious
property similar to cement.

7
VARIOUS USES OF FLY ASH
Fly Ash Bricks / Blocks
Cement Concrete
High Volume Fly Ash Concrete(HVFAC)
Road construction
Embankment / Back fills / Land development
Controlled Low Strength Material(CLSM)
Use in agriculture
Mine filling
8
CEMENT CONCRETE
How fly ash works with Cement in Concrete?
Ordinary Portland Cement (OPC) is a product of four principal
mineralogical phases. These phases are Tricalcium Silicate- C3S
(3CaO.SiO2), Dicalcium Silicate C2S (2CaO.SiO2), Tricalcium
Aluminate- C3A (3CaO.Al2O3) and Tetracalcium alumino-ferrite -
C4AF(4CaO. Al2O3. Fe2O3).
2C3S + 6H C3S2H3 + 3 CH
Water C-S-H Gel Calcium Hydroxide

9
Previous reactions indicate that during the hydration process of
cement, lime is released out and remains as surplus in the hydrated
cement. This leached out surplus lime renders deleterious effect to
concrete such as make the concrete porous, give chance to the
development of micro- cracks, weakening the bond with aggregates
and thus affect the durability of concrete.

10
If fly ash is available in the mix, this surplus lime becomes the source
for pozzolanic reaction with fly ash and forms additional C-S-H gel
having similar binding properties in the concrete as those produced by
hydration of cement paste. The reaction of fly ash with surplus lime
continues as long as lime is present in the pores of liquid cement paste.
The process can also be understood as follows:
Ordinary Portland cement + water Surplus lime + cementitious
material
Surplus lime + fly ash additional cementitious material

11
ENVIRONMENTAL BENEFITS
Use of fly ash in concrete imparts several environmental benefits and
thus it is ecofriendly.
It saves the cement requirement for the same strength thus saving of
raw materials such as limestone, coal etc required for manufacture of
cement.
Manufacture of cement is high-energy intensive industry. In the
manufacturing of one tonne of cement, about 1 tonne of CO2 is emitted
and goes to atmosphere. Less requirement of cement means less
emission of CO2 result in reduction in green house gas emission.

12
SALIENT ADVANTAGES
Reduction in heat of hydration and thus reduction of thermal cracks and improves
soundness of concrete mass.
Improved workability / pumpabilty of concrete
Converting released lime from hydration of OPC into additional binding material
contributing additional strength to concrete mass.
Pore refinement and grain refinement due to reaction between fly ash and liberated
lime improves impermeability.
Improved impermeability of concrete mass increases resistance against ingress of
moisture and harmful gases result in increased durability.
Reduced requirement of cement for same strength thus reduced cost of concrete.

13
FLY ASH BRICKS

These bricks have following advantages over ordinary clay bricks:


Possess adequate crushing strength as a load bearing member.
Have cement colour in appearance
Are uniform in shape
Smooth in finish and requires no plastering for building work.
Are lighter in weight than ordinary clay bricks
Are cheaper than ordinary clay bricks

14
Fig 1:- FLY ASH BRICKS
15
ROAD CONSTRUCTION
There are many techniques available which utilize fly ash in road construction.
These techniques are highlighted below :-
Use as Granular Sub-base Material
Use as Soil Stabilizer
Utilization of Fly Ash in semi-rigid and rigid pavement as-
o Lean cement fly ash concrete
o Lime fly ash concrete
o Fly ash in rigid pavement construction
o Fly ash as filler in Bituminous / Asphalt concrete
o Roller Compacted Concrete

16
EMBANKMENT / BACKFILLS / LAND
DEVELOPMENT

Fly Ash is relatively lighter than earth.


Well compacted Fly ash exhibit
good shear strength comparable to soils
normally used in earth fill operations.
It is easier to compact coal ash
as compared to earth.

Fig 2:-SOIL STABILISATION


USING FLY
17
AGRICULTURAL USE
As a soil amendment to modify the pH of the soil.
As a soil conditioner to improve the physical and chemical properties of the soil.
As a source of essential plant nutrients like P , K , Ca , Mg , Cu , Zn , Fe , Mn etc.
S.No. Name of the crop Increase in yields
1. Wheat 16-20 %
2. Paddy 10-15%
3. Sugarcane 20-25%
4. Banana 25-30%

18
CONCLUSION
Fly ash utilization has great potential to lower green house gas
emissions by decreased mining activities and reducing carbon
dioxide production during manufacture of materials that can be
substituted by fly ash. Utilization of fly ash is beneficial not
only from environmental considerations, but also to avoid land
usage for fly ash dumping. Though there has been a steady
progress in fly ash utilization from 1990, there is a long way to
go to reach the target of 100 per cent fly ash utilization. Fly
ash can become a wealth generator by making use of it for
producing green building materials, roads, agriculture etc.
Full utilization of the generating stock will provide employment
potential for three hundred thousand people and result in a
business volume of over Rs.4,000 crores.
19
Thank
You
20

You might also like