Scribd Logo
Upload

Welcome to Scribd!

  • 233 views

    T30

    Uploaded by

    V P Singh
    The Tester T30 is a hand-held instrument for periodic machine condition monitoring. It is applied by leading industries all over the world for early fault detection, to avoid production losses through unplanned downtime, and to reduce the overall costs for maintenance. The Tester T30 uses all three leading condition monitoring methods. On each machine you can select the combination of measurements that best meets your technical requirements: Shock pulse measurement on rolling bearings supplies data on bearing damage, lubrication condition and the effects of alignment and load. In many applica- tions, the bearings are the only machine elements which need monitoring. Vibration severity measurement is the ISO recommended method for general condition monitoring. It detects the most common mechanical faults, such as unbalance, structural weakness, and loose parts. Vibration monitoring with spectrum analysis allows you to target individual fault symptoms and get a machine specific condition evaluation. Rotational speed and temperature. Spot checks, for large scale data collection, and for long-time recording on a single measuring point

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd

    T30

    Uploaded by

    V P Singh
    233 views4 pages
    The Tester T30 is a hand-held instrument for periodic machine condition monitoring. It is applied by leading industries all over the world for early fault detection, to avoid production losses through unplanned downtime, and to reduce the overall costs for maintenance. The Tester T30 uses all three leading condition monitoring methods. On each machine you can select the combination of measurements that best meets your technical requirements: Shock pulse measurement on rolling bearings supplies data on bearing damage, lubrication condition and the effects of alignment and load. In many applica- tions, the bearings are the only machine elements which need monitoring. Vibration severity measurement is the ISO recommended method for general condition monitoring. It detects the most common mechanical faults, such as unbalance, structural weakness, and loose parts. Vibration monitoring with spectrum analysis allows you to target individual fault symptoms and get a machine specific condition evaluation. Rotational speed and temperature. Spot checks, for large scale data collection, and for long-time recording on a single measuring point

    Original Title

    T30- PPT

    Copyright

    © © All Rights Reserved

    Available Formats

    PPTX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The Tester T30 is a hand-held instrument for periodic machine condition monitoring. It is applied by leading industries all over the world for early fault detection, to avoid production losses through unplanned downtime, and to reduce the overall costs for maintenance. The Tester T30 uses all three leading condition monitoring methods. On each machine you can select the combination of measurements that best meets your technical requirements: Shock pulse measurement on rolling bearings supplies data on bearing damage, lubrication condition and the effects of alignment and load. In many applica- tions, the bearings are the only machine elements which need monitoring. Vibration severity measurement is the ISO recommended method for general condition monitoring. It detects the most common mechanical faults, such as unbalance, structural weakness, and loose parts. Vibration monitoring with spectrum analysis allows you to target individual fault symptoms and get a machine specific condition evaluation. Rotational speed and temperature. Spot checks, for large scale data collection, and for long-time recording on a single measuring point

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    233 views4 pages

    T30

    Uploaded by

    V P Singh
    The Tester T30 is a hand-held instrument for periodic machine condition monitoring. It is applied by leading industries all over the world for early fault detection, to avoid production losses through unplanned downtime, and to reduce the overall costs for maintenance. The Tester T30 uses all three leading condition monitoring methods. On each machine you can select the combination of measurements that best meets your technical requirements: Shock pulse measurement on rolling bearings supplies data on bearing damage, lubrication condition and the effects of alignment and load. In many applica- tions, the bearings are the only machine elements which need monitoring. Vibration severity measurement is the ISO recommended method for general condition monitoring. It detects the most common mechanical faults, such as unbalance, structural weakness, and loose parts. Vibration monitoring with spectrum analysis allows you to target individual fault symptoms and get a machine specific condition evaluation. Rotational speed and temperature. Spot checks, for large scale data collection, and for long-time recording on a single measuring point

    Copyright:

    © All Rights Reserved
    Download as PPTX, PDF, TXT or read online from Scribd
    Download as pptx, pdf, or txt
    of 4

    Advanced Machine Condition Monitoring

    [Tester T30 with Condmaster Pro]

    Contact free measuring point


    identification with
    CondID TM tags

    LCD screen, 4 x 16
    characters, with
    automatic backlight
    Instant condition
    evaluation on green yellow - red
    scale

    Memory for
    500 typical
    measuring
    points
    Continuous recording of
    shock
    pulses, vibration
    plus
    speed
    or
    temperature for up to 50
    hours

    Fast data logging:


    download
    measuring round,
    upload results to
    PC

    Saves up to 11
    results per point,
    plus the top 200
    spectrum lines and
    a comment

    Sealed membrane
    keypad for selection
    and programming

    Battery life
    typical 5000
    measurements

    Shock pulse
    transducers:
    hand- held
    probe, adapter
    probe,
    permanently
    installed
    Probes for temperature
    and speed.
    Connection to PC

    Comprehensi
    ve
    measuring
    functions

    Vibrations transducers: hand-held,


    attached by magnet,
    permanently installed

    Instant
    conditio
    n
    evaluati
    on

    Fast
    and
    easy
    operatio
    n

    Avoid
    unplanned
    downtime

    Monitor
    your plant
    stoppers

    Early
    warning
    maintains
    profit

    SPECIFICATIONS
    The Tester T30 is a hand-held instrument for periodic machine condition
    monitoring. It is applied by leading industries all over the world for early
    fault detection, to avoid production losses through unplanned downtime,
    and to reduce the overall costs for maintenance.
    The Tester T30 uses all three leading condition monitoring methods. On
    each machine you can select the combination of measurements that best
    meets your technical requirements :
    Shock pulse measurement on rolling bearings supplies data on bearing damage,
    lubrication condition and the effects of alignment and load. In many applica- tions, the
    bearings are the only machine elements which need monitoring.
    Vibration severity measurement is the ISO recommended method for general
    condition monitoring. It detects the most common mechanical faults, such as
    unbalance, structural weakness, and loose parts.
    Vibration monitoring with spectrum analysis allows you to target individual fault
    symptoms and get a machine specific condition evaluation.
    Rotational speed and temperature.
    Spot checks, for large scale data collection, and for long-time recording on a single
    measuring point

    Technical data for Tester T30


    Shock pulse (SPM dBm/dBc)
    Measuring range:
    Resolution:
    Accuracy:

    9 to 99 dBsv
    1 dBsv
    1 dBsv

    Vibration severity (ISO 10816)


    Measuring range:
    Resolution:
    Accuracy:
    Frequency range:

    0.5 to 49.9 mm/s RMS


    0.1 mm/s
    (0.2 mm/s + 2% of reading)
    3 to 1000 Hz

    Vibration analysis (EVAM)


    Number of samples:
    FFT result:
    Frequency range:
    Lines displayed:
    Lines saved:

    1024 / 2048
    400 / 800 spectrum lines
    3 to5000 Hz
    15 highest , toggle Hz / cpm
    1 to 200 highest

    Speed measurement
    Measuring range:

    10 to 19 999 rpm optical

    Measuring distance:

    max. 0.6 m

    Resolution:

    1 rpm

    Accuracy:

    (1 rev. + 0.1% of reading)

    Temperature measurement
    Measuring range:

    20 to +350 C

    Resolution:

    1 C

    Instrument specifications
    Temperature range:
    Power supply:
    Battery life:
    recording power down

    0 to +50 C
    6 x 1.5 V LR6 alkaline cells
    1 year, or 5000 readings, or 50 hours

    Instrument size:

    255 x 105 x 60 mm

    Weight:

    0.85 kg

    Display:

    LCD, 4x16 characters, LED backlight

    Backup, memory/clock :

    approx. 24 hours

    You might also like