Scribd
Upload
25 views7 pages

Android Controlled RGB LED Using Arduino: G H Patel Collage of Engineering & Technology

1) Three students - Jemish Paghadar, Deep Patel, and Soni Utsav - created an Android controlled RGB LED using an Arduino board for their Microprocessor and Interfacing course. 2) The main components used were an Arduino Uno board, HC-05 Bluetooth module, and an RGB LED. 3) The RGB LED's red, green, and blue pins were connected to PWM pins 3, 5, and 6 on the Arduino. The Bluetooth module was connected to the Arduino to allow for Android control of the RGB LED colors via a Bluetooth connection.

Uploaded by

dp22
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
25 views7 pages

Android Controlled RGB LED Using Arduino: G H Patel Collage of Engineering & Technology

1) Three students - Jemish Paghadar, Deep Patel, and Soni Utsav - created an Android controlled RGB LED using an Arduino board for their Microprocessor and Interfacing course. 2) The main components used were an Arduino Uno board, HC-05 Bluetooth module, and an RGB LED. 3) The RGB LED's red, green, and blue pins were connected to PWM pins 3, 5, and 6 on the Arduino. The Bluetooth module was connected to the Arduino to allow for Android control of the RGB LED colors via a Bluetooth connection.

Uploaded by

dp22
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 7

G H Patel Collage Of

engineering & Technology

Android Controlled RGB


LED Using Arduino
GUIDED BY : PROF. ASHISH N. Christian
NAME :

SUB :

JEMISH PAGHADAR ( 140110107030 )


DEEP PATEL ( 140110107037 )
SONI UTSAV ( 140110107060 )
MICROPROCESSOR AND INTERFACING (2150707)

COMPONENTS NEED
Arduino uno

HC-05 Bluetooth Module

RGB

COMPONENTS NEED

Arduino uno

HC-05
Bluetooth
Module

RGB LED's

We used here is RGB LED you can also use a normal THD(Through Hole
Device)LED.before choosing the LEDbe careful whether it is common anode type or
common cathode.here we used is common anode type. which meansthe R,Gand B
terminals is connected to PWM pins and the final terminal is connected to vcc 5v in
arduino. We soldered the RGB LED in the pref board so it is easy to connect to arduino.
connection is made based on the type of the LED. We used here is common anode type
common
pin
is
connected
to
+5
vcc.

RGB
Pin
Pin
Pin

LED
3
5
6

HC-05

of
is
of

CONNECTION
arduino
arduino
arduino

(Only
pin
3,5,6,9,10,11
is
connected
to
red
pin
connected
to
green
pin
is
connected
to
blue
pin

Bluetooth

Pin
vcc
is
connected
to
+5
Pin
gnd
is
connected
Pin
Txd
is
connected
Pinn Rxd is connected to arduino pin 12.

are
of
of
of

module
or

+3
to
to

based
on
arduino
arduino

PWM
RGB
RGB
RGB

pins)
LED.
LED.
LED.

connection
your
gnd
pin

module.
pin.
11.

THANK
YOU

You might also like