Scribd
Upload
568 views9 pages

How To Commision FSMF

The document provides instructions for commissioning a Flexi Multiradio Site Manager Frame (FSMF) for a 2G BTS. The steps include downloading installation software, checking the PC firewall settings, using a specific IP address, performing the same activities as before like connecting the LMP port, and removing the optical patch cord from the FSMF while commissioning. Additional software is also required including an activation for the BTS hardware, TRX hardware activations, and GSM BTS power licenses.

Uploaded by

Gaurav Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
568 views9 pages

How To Commision FSMF

The document provides instructions for commissioning a Flexi Multiradio Site Manager Frame (FSMF) for a 2G BTS. The steps include downloading installation software, checking the PC firewall settings, using a specific IP address, performing the same activities as before like connecting the LMP port, and removing the optical patch cord from the FSMF while commissioning. Additional software is also required including an activation for the BTS hardware, TRX hardware activations, and GSM BTS power licenses.

Uploaded by

Gaurav Pandey
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 9

HOW TO COMMISION FSMF

Download the 2G First Installation Software named


TargetBD from the Flexi Multiradio 10 BTS EDGE
GF1 1.0.0 SW
INSTALLALED THE BTS SITE MANAGER
CHECK YOUR PC FIREWALL SETTING (FIREWALL
SETTING MUST BE OFF)
IN SYSTEM USE THE FOLLOWING IP 192.168.255.130/
SUBNET255.255.254.0
AFTER DOING THE ACTIVITY AS EARLIER SAME
ACTIVITY WILL BE PERFORM , LIKE CONNECT THE
LMP PORT & COMMISION THE FSMF
WHILE COMMISION ING ,OPTICAL PATCH CHORD
SHOULD BE REMOVE FROM FSMF

Open the BTS site Manager: USER NAME.Nemuadmin &

Press OK

TargetBD_btspack_01.04-00.zip or TargetBD_btspack_01.04-03.zip
depending on the software

After that connect 2G Flexi BTS Manager

Software required
* FSxG BTS HW Activation
- 1 Nos per BTS
* Flexi Multiradio TRX HW
Activation RLK- - 12 Nos per
BTS
* GSM BTS Power License 20W
step RLK - 9 NOs per BTS

You might also like