Contents:: by (Editor) by by

Course Contents & Books Recommended
Contents:
1. Non-conventional Energy as an Alternative including basics of

Solar Energy, Conditions for maximizing harnessing of Solar
Energy
2. Concepts & Developments pertaining to the Nanomaterials for
Photovoltaic Applications, Conventional Vs. Nanomaterials for PV
3. Photovoltaics : Principles, Design, Materials, Fabrication, Testing
& Comparative studies of state-of-the art Technologies
Books:
1.
Nanostructured Materials for Solar Energy Conversion By Tetsuo Soga (Editor)
2.
Solar Photovoltaics: Fundamentals, Technologies & Applications By C. S. Solanki
3.
Solar Cell Device Physics By Stephan Fonash
4.
Solar Energy Fundamentals By H. P. Garg
Course & Marks Breakup

Course Breakup
Theory : 3 Lectures Per week
Tutorials : Problems Concurrently
Marks Breakup
Mid-Semester : 30%
End-Semester : 50%
Attendance/Quiz : 20%
Weightage for Attendance & Regularity in Class : 10%

2
TENTATIVE LECTURE PLANNING
Global Energy Scenario

Impending Energy Crisis & Other Implications
State-of-the-art Status of Alternative Energy
An overview of the Solar Photovoltaics
Solar Cell Basics
3
Conventional Energy Resources
Conventional Energy : State of the art Status
ENERGY CONSUMPTION-COST RATIO
Energy Resource Distribution & Availability
Energy Yield for different Sources
Energy Resource vis--vis Pollution
Cost Comparison of Different Sources of Energy
NON CONVENTIONAL SOURCES ARE ALWAYS

CHEAPER & GREEN
History
1839 Becquerel
Observed that there was a light dependant voltage
between two electrode immersed in an electrolyte.
1876 The same effect was demonstrated in

selenium
1941 First silicon based solar cell demonstrated
1954 Beginning of modern solar cell research.
11
Earths Radiative Balance
12
Distribution of Solar Energy
13
Photon Energy
14
The Electromagnetic Spectrum
15
Light & the Photovoltaic Effect

Certain semiconductor materials absorb certain
wavelengths
The shorter the wavelength the greater the energy
Ultraviolet light has more energy than infrared light
Crystalline silicon
Utilizes all the visible spectrum plus some infrared radiation
Heat vs. electrical energy

Light frequencies that is too high or too low for the
semiconductor to absorb turn into heat energy instead of
electrical energy
16
What Does a Solar Cell Do?

With no load ("open circuit"), the solar
cell produces its maximum voltage.
+
V
-
With no load ("short circuit"), the solar

cell produces its maximum current.
+
I
+
R
-
With a load (resistance R) the solar

cell produces power P=IV=V2/R:
0.0395*3.88=0.15 W
3.88*3.88/100=0.15 W
17
Sunlight shines on the solar panel
The solar panel converts sunlight to electrical energy.

18

This solar panel on this car can
be adjusted so it faces the sun.
The sun is in a different position
in the sky at different times of
the day and at different places.
Solar cells do not store solar energy.

When the solar panel is shaded, the
wheels will not turn!
19
Solar Panels
Electron knockout
Conventional solar panels are made of pairs of sheets of semiconducting silicon, doped with phosphorus
and boron atoms. Electrons in the phosphorus-doped (N-type) layer migrate across the boundary to occupy
holes left in the boron-doped (P-type) material, setting up a voltage across the boundary between the two
layers. When photons hit the silicon in a cell they knock electrons out of its crystal structure, generating a
current that is collected by a mesh of metal contacts.
The solar panels are constructed in a similar way, but they are made just 1 micrometre thick by depositing
polymorphous silicon at high pressures and temperatures. "Polymorphous silicon is as rigid as crystalline
silicon. But because it is less than a micrometre thick it is flexible," Kroesen says. Today's solar panels are
typically somewhere between 4 and 10 m illimetres thick.
The process of producing industrial films involves temperatures of up to 200C, which would melt a plastic
substrate. So instead of depositing the doped layers directly onto plastic they are first deposited onto
aluminium foil.
After the assembly has cooled, a plastic carrier layer is added underneath it and the aluminium is removed
and recycled. Contacts are then added, followed by a protective plastic layer on top, too. This sequence
lends itself to continuous production on rolls of plastic film.
20
Solar Cell Efficiency

Typical module efficiencies ~12%
Screen printed multi-crystalline solar cells
Efficiency range is 6-30%

6% for amorphous silicon-based PV cells
20% for best commercial cells
30% for multi-junction research cells
Typical power of 120W / m2

Mar/Sep equinox in full sun at equator
21
History of Cell Efficiency
M.A. Green, Very High Efficiency

Solar Cells-Science and Technology,
IEEE Transactions on Electron Devices,
Vol. 46, No. 10, pp. 1940-1947, (1999).
Notice: This trend is not like Moores Law.

Price per installed Watt is probably a better figure of merit to track.
Deregulation made power generated by solar or wind economically
22
viable!
Solar Panel Efficiency

~1 kW/m2 reaches the ground (sunny day)
~20% efficiency 200W/m2 electricity
Daylight & weather in northern latitudes
100 W/m2 in winter; 250 W/m2 in summer
Or 20 to 50 W/m2 from solar cells
Value of electricity generated at $0.08/kWh

$0.10 / m2 / day OR $83,000 km2 / day
23
Conditions for Solar Energy Entrapment & Limits
24
Solar PV Dependencies
Location, Location, Location !
Latitude
Lower latitudes better than higher latitudes
Weather
Clear sunny skies better than cloudy skies
Temperature not important
Direction solar arrays face

South preferred, east and west acceptable
Absence of shade
Trees, Flatirons, etc.
25
Solar PV Design Key Factors

Location
How much solar radiation does the system receive?
DC rating
How big is the system
26
Solar PV Design Module

Module Efficiency
How efficiently does the solar system convert solar
radiation into DC power
Best retail systems approaching 17%
Holy Grail of solar PV research
DC to AC derate factor
How efficient is the system converting DC to AC power
27
Solar PV Array Design

Array Flat Panel
Remains in a constant fixed position
Array tilt (equal to latitude best)

Increase solar radiation by 10-20% compared to 0% tilt
Sunnier locations benefit more
Array azimuth (180 best)

Directly south
28
Solar PV Array Tracking

Array 1-axis tracking
Tracks sun across the sky during each day

Stays at a constant tilt
Increase solar radiation by 25-30% compared to no tracking
Array 2-axis tracking
Tracks sun across the sky during each day

Adjusts tilt more in winter, less in summer
Increase solar radiation by 33-38%
29
Solar PV Components
Inverter
Charge controller
Converts DC power from

solar array to AC for use in
your home
Wiring
Connects the system
components
Batteries
Used to store solarproduced electricity for
nighttime or emergency use
Mainly used for remote
sites that arent tied into the
electrical grid
Prevents batteries from

being over charged
Disconnect switches
Allows power from a PV
system to be turned off
Electrical meter
Measures electrical
production and use
Often runs backward if
system is attached to the
electrical grid
Total system cost = ~$8.00 / watt
30
Quantum Efficiency of a Solar Cell : SQ Limit

The Quantum Efficiency or Energy Conversion Efficiency of a solar cell is the
percentage of power converted directly obtained from sunlight to electrical energy under
"standard test conditions" (STC). The STC approximate solar noon at the spring and
autumn equinoxes
The root cause of a lower efficiency of solar cells (<<100%), lies in the inability of
the material components (i.e.; semiconductors) in being non responsive to the
entire spectrum of sunlight.
Considering Si as the component mateial for Solar Cell fabrication, photons with
energy less than silicon's band-gap pass through the cell and are not absorbed,
which wastes about 18% of incoming energy. The energy content of incident
photons above the band-gap is wasted & re-emitted as heat or light. This accounts
for an additional loss of about 49%.
So, about 67% of energy from the original sunlight is lost, or only 33% is usable for
electricity in an ideal solar cell.
This limit of efficiency on the performance delivery of a solar cell is referred to as the
theoretical limit predicted in 1961 by William Shockley and Hans Queisser. It is
known as Shockley Queisser (SQ) Efficiency Limit for single junction solar cell.
It bears a strong correlation with the band gap of the material components for
solar cell fabrication.
Benefits/Costs of Solar PV
Reduces pollution
Stabilizes electricity costs
Lessens dependence on fossil fuels
Increases self-reliance
Can size for small, on-site installations
Not grid dependent
Currently expensive $$$$$ - R & D Important
32
Uses for Solar Energy

It is fun to watch PG&Es
meter run backward.
Renewable power
Power for remote locations
33

Contents:: by (Editor) by by

Uploaded by

Copyright:

Available Formats

Contents:: by (Editor) by by

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Contents:: by (Editor) by by

Uploaded by

Copyright:

Available Formats

Course Contents & Books Recommended

1. Non-conventional Energy as an Alternative including basics of

Nanostructured Materials for Solar Energy Conversion By Tetsuo Soga (Editor)

Solar Photovoltaics: Fundamentals, Technologies & Applications By C. S. Solanki

Solar Cell Device Physics By Stephan Fonash

Solar Energy Fundamentals By H. P. Garg

Course & Marks Breakup

Weightage for Attendance & Regularity in Class : 10%

TENTATIVE LECTURE PLANNING

Global Energy Scenario

Conventional Energy Resources

Conventional Energy : State of the art Status

ENERGY CONSUMPTION-COST RATIO

Energy Resource Distribution & Availability

Energy Yield for different Sources

Energy Resource vis--vis Pollution

Cost Comparison of Different Sources of Energy

NON CONVENTIONAL SOURCES ARE ALWAYS

1876 The same effect was demonstrated in

Earths Radiative Balance

Distribution of Solar Energy

The Electromagnetic Spectrum

Light & the Photovoltaic Effect

Heat vs. electrical energy

What Does a Solar Cell Do?

With no load ("short circuit"), the solar

With a load (resistance R) the solar

What Does a Solar Cell Do?

Sunlight shines on the solar panel

The solar panel converts sunlight to electrical energy.

What Does a Solar Cell Do?

Solar cells do not store solar energy.

Solar Cell Efficiency

Efficiency range is 6-30%

Typical power of 120W / m2

History of Cell Efficiency

M.A. Green, Very High Efficiency

Notice: This trend is not like Moores Law.

Solar Panel Efficiency

Value of electricity generated at $0.08/kWh

Conditions for Solar Energy Entrapment & Limits

Direction solar arrays face

Solar PV Design Key Factors

Solar PV Design Module

Solar PV Array Design

Array tilt (equal to latitude best)

Array azimuth (180 best)

Solar PV Array Tracking

Tracks sun across the sky during each day

Array 2-axis tracking

Tracks sun across the sky during each day

Converts DC power from

Prevents batteries from

Total system cost = ~$8.00 / watt

Quantum Efficiency of a Solar Cell : SQ Limit

Uses for Solar Energy

You might also like