BITS
Mechatronics Project List
Automation of door bell (Smart Door Bell)
Project Team: Group 9
Anand Wakode- 2014HC30515
Girish Zope2014HC30529
Chetan Borase- 2014HC30514
Objective :
Smart door bell is an automation of the traditional door bell. With new
system, door switch will be replaced with the motion sensor which will give
alert even of person on door step without using the switch.
This small level of automation will improve safety and changes are very
small as switch is replaced by sensor , which will not affect the asthmatics
and simple in structure will encourage the people to move towards home
automation on broader scale.
Project Scope:
To build the smart door bell system for domestic
purpose within affordable range (< Rs. 2000/-).
Business Impacted:
Home automation.
Automated
Traditional
Analysis of a Problem:
In the traditional door bell ,the visitor needs to operate the door bell switch
to give an indication.
Step 1:
Objective :
Smart door bell is an automation of the traditional door bell. With
new system, door switch will be replaced with the motion sensor
which will give alert even of person on door step without using the
switch.
This small level of automation will improve safety and changes are
very small as switch is replaced by sensor , which will not affect the
asthmatics and simple in structure will encourage the people to
move towards home automation on broader scale.
Traditional bell
Project Scope: To build the smart door bell system for domestic
purpose within affordable range (< Rs. 2000/-).
Step 2:
Business Impacted: Home automation.
Analysis of the Problem:
In the traditional door bell had below
limitations
1.Bell button damaged after prolonged use
need replacement.
2.Can cause electric shock.
3.Children cannot reach to the switch
Automated Bell
Step 3:
Specifications of Specification:
1. Object to detect human being.
2. Range for detection - 2 mtrs
3. Duration of detection - Both day and night time.
4. Output desired Sound and Flash light
Step 4:
Generation of possible solutions:
1. Photodiode sensed Door Bell
2. Infrared sensed Door Bell
3. Ultrasonic sensed Door Bell
Step 5:
Selection of possible solution:
1. PIR based Door Bell is selected for the below advantage over
the other 2
1. PIR stands for Passive Infra-Red Sensor. This sensor
can detect the human presences during day and night
Bill of Material (BOM):
Below components are being collected to make assembly.
1- PIR motion sensor
- 1 Qty (Order from Amazon)
2- Adriano Uno Kit
- 1 Qty (Local supplier from Pimpri)
3- Electronic Buzzer
- 1 Qty (Local supplier from Pimpri)
4- LED
- 1 Qty (Local supplier from Pimpri)
5- Power cod / battery
- 1 Qty (Local supplier from Pimpri)
Block Diagram
Human
Motion
Power
Supply
Sensor
PIR
Sensor
Processor
Arduino UNO Kit
Input
Actuator
Output
Buzzer
Sound
Detectio
n
(Buzzer)
LED
Visual
Detectio
n (LED)
Circuit Diagram
Circuit Diagram for Door Bell
LED
Adriano Kit
Buzzer
PIR Sensor
Image of actual Smart Door
Bell
Limitations:
Difficult to mount the PIR sensor. It cover wide angle of detection. So
need to cover the motion sensor area to limit the detection area
Sensitivity of PIR sensor is high so care has to be taken while
installations and handling.
Future Scope:
System should stop after the door is opened.
Provision to restrict the detection of PIR sensor.
Working video
Mid Year Progress:
Program run for reading PIR Sensor completed
Program run for buzzer out is completed
Program run for the Flash LED completed