Scribd
Upload
598 views10 pages

Power Transmission

This document discusses power transmission using belt drives. It defines belt drives as a transmission system that uses two pulleys connected by an endless belt to transmit power from the driving pulley to the driven pulley. The key factors in selecting a belt drive are the distance between shafts, operating speed, and power requirements. Open and closed belt drives are described, with open belt drives allowing rotation in both directions and closed drives operating in opposite directions. Advantages of belt drives include low cost and ability to transmit power over moderate distances efficiently at high speeds, while disadvantages are reduced belt life due to joints and power losses from slip and creep.

Uploaded by

KishanSavaliya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
598 views10 pages

Power Transmission

This document discusses power transmission using belt drives. It defines belt drives as a transmission system that uses two pulleys connected by an endless belt to transmit power from the driving pulley to the driven pulley. The key factors in selecting a belt drive are the distance between shafts, operating speed, and power requirements. Open and closed belt drives are described, with open belt drives allowing rotation in both directions and closed drives operating in opposite directions. Advantages of belt drives include low cost and ability to transmit power over moderate distances efficiently at high speeds, while disadvantages are reduced belt life due to joints and power losses from slip and creep.

Uploaded by

KishanSavaliya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 10

Theory Of Machine

Power transmission
(Belt Drive)

Dhaval Prajapati
ME-2
(136540319088)
1

Power transmission
Introduction
Rotating elements which possess mechanical energy has to
be utilized at required place by transmitting.
From prime mover to machine
From one shaft to another

Transmission system
The system that is used to transmit power from one
mechanical element to another mechanical element.

Types of transmitting system


Belt drives
Rope drives
Chain drives
Gear drives
2

Factors to select transmission


system

Distance between driver and driven pulley shaft.


Operational speed.
Power to be transmitted.

Belt drive
Power is to be transmitted
between the parallel shaft.
Consists of two pulleys over
which a endless belt is
passed encircling the both.
Rotary motion is transmitted
from driving pulley to driven
pulley.
3

Friction is a helpful agent.


Tension in one side of the belt
Portion of the belt having less tension is called
slack side.
Portion of the belt having high tension is called
tight side.

Terminology of a belt
drive

Driver : in a transmission system the one which drives or supplies


power to other mechanical element.
Driven : in a transmission system the one which follows the
driver or receives power from driver.
Tight side : the portion of the belt in maximum tension. Denoted
by T1 Newton.
Slack side : the portion of the belt in minimum tension. Denoted
by T2 Newton.
Arc / angle of contact : it is the portion of the belt which is in
contact with pulley surface. Denoted by
4

Classification
Open belt drive
Closed belt drive

Open belt drive

Both driver and driven


pulley rotate in both
direction.
Belt is passed over driver
and driven.
Driver pulley pulls the belt
from one side and delivers
to other side.
Tension is more in lower
side then upper side.
5

Cross belt drive

Driven rotates in opposite


direction to that of driver.
At the point were the belt
crosses it rubs against
each other and there will
be wear.
To avoid this speed of belt
should be less than
15 m/s.

Comparison between Open belt drive and


Close belt drive
Open Belt Drive

Closed Belt Drive

Both driver and the driven


rotates in the same direction

Driver and driven rotates in


opposite direction

When the shafts are horizontal,


inclined it is effective to transmit
the power

Even if the shafts are vertical it is


effective to transmit the power

As there is no rubbing point, the


life of the belt is more

Due to the rubbing point, the life


of the belt reduces.

Require less length of the belt


Require more length of belt
compared to crossed belt drive
compared to open belt drive for
for same centre distance,
pulley
the
same
centre distance, pulley
www.bookspar.com
| Website
for
7
diameters. Students | VTU NOTES |
diameters.
QUESTION PAPERS

Definitions in belt drives


Slip:
Relative motion between pulley and the belt passing over
it is defined as slip.

Creep:

The relative motion between the belt and the pulley surface due to
contraction and expansion of belt is defined as creep.
Creep increases with load as it is caused by the elasticity of the belt.
It reduces the speed of the driven pulley which results in loss of
power
transmission.

Idler pulley

Stepped Pulley

Fast and loose pulley

Advantages of flat belt drives

Running and maintenance cost is low.

Possibility to transmit power over a moderately long


distance.

Efficient at high speeds.

Not preferred for short centre distance.

Belt joints reduces the life of the belt.

Loss of power due to slip and creep.

Disadvantages

10

You might also like