Scribd
Upload
63 views11 pages

Limiting Conditions - Reflux Ratios: Total Reflux Ratio, D 0, L/V 1, and L/D Minimum Reflux Ratio, (L/D)

The document discusses two limiting conditions for the external reflux ratio (L/D) in distillation columns: total reflux ratio (D=0, L/V=1, L/D→∞) and minimum reflux ratio ((L/D)min). Total reflux provides the minimum number of equilibrium stages needed for separation but is not practical for operation. Minimum reflux is the ratio where separation can be achieved with an infinite number of stages by the operating lines touching the equilibrium curve. It is common to specify the operating reflux ratio as a multiple of the minimum, such as L/D=2(L/D)min.

Uploaded by

Jun Obam'do
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
63 views11 pages

Limiting Conditions - Reflux Ratios: Total Reflux Ratio, D 0, L/V 1, and L/D Minimum Reflux Ratio, (L/D)

The document discusses two limiting conditions for the external reflux ratio (L/D) in distillation columns: total reflux ratio (D=0, L/V=1, L/D→∞) and minimum reflux ratio ((L/D)min). Total reflux provides the minimum number of equilibrium stages needed for separation but is not practical for operation. Minimum reflux is the ratio where separation can be achieved with an infinite number of stages by the operating lines touching the equilibrium curve. It is common to specify the operating reflux ratio as a multiple of the minimum, such as L/D=2(L/D)min.

Uploaded by

Jun Obam'do
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 11

Limiting Conditions Reflux Ratios

The external reflux ratio, L/D, is often a parameter that is


specified for column operation since it is perhaps the
easiest to change under column operation and changing
L/D often has a substantial effect on the overall column
behavior and separation.

There are two limiting conditions with respect to the


reflux ratio, L/D, that one obtains:

Total reflux ratio, D = 0, L/V = 1, and L/D


Minimum reflux ratio, (L/D)min.

One will often see an external reflux specification as a


multiple of the minimum reflux ratio, for example, L/D =
2(L/D)min, etc.
Lecture 15

Total Reflux and Boilup


Limiting Condition

A column which has total reflux and boilup has no


feed the distillate, bottoms, and feed flow rates are
zero.

This is a limiting condition which provides one with


the minimum number of equilibrium stages that can
be obtained for a given column.

While one would not typically operate under such


conditions, total reflux and boilup are used for
starting up a column, for operating the column off-line
when other unit operations are off-line, and for testing
column efficiency.
Lecture 15

Limiting Conditions Total Reflux

At total reflux:

R L/D
L/V 1.0
LV
L/ V 1.0

Both operating lines, TOL and BOL, become the y = x


auxiliary line.

Operating a column under total reflux yields the


minimum number of equilibrium stages for a particular
column.
Lecture 15

Total Reflux

Lecture 15

Total Reflux
Minimum Number of Equilibrium Stages

Lecture 15

Limiting Conditions Minimum Reflux

Minimum reflux, Rmin or (L/D)min, is defined as the


external reflux ratio at which the specified separation
could just be obtained with an infinite number of
stages.
(L/V) min
R min (L/D) min
1 (L/V) min

We obtain an infinite number of stages if our


operating lines touch the equilibrium curve.

The point on the equilibrium curve that this occurs is


called a pinch point.
Lecture 15

Two Types of Pinch Points

For many systems, the pinch point will occur where


the feed line crosses the equilibrium curve.

A second type of pinch point can occur in non-ideal


system where the operating line touches the
equilibrium curve before the intersection of the feed
line and the equilibrium curve.

One should always look at a system to determine if a


non-ideal pinch point occursJust dont blindly
assume it will be at the intersection of the feed line
and equilibrium curve.
Lecture 15

Minimum Reflux
Infinite Number of Equilibrium Stages

Lecture 15

Limiting Conditions Minimum Boilup

A minimum boilup ratio, (V/B)min, can be similarly


defined as the boilup ratio at which the specified
separation could just be obtained with an infinite
number of stages.

(V/B) min

(L/ V) max 1

Because of this relationship of the BOLs slope, L/V,


to the boilup ratio, V/B, we have a maximum L/V at
minimum boilup, V/B.
Lecture 15

Possible Reflux Operating Conditions

Lecture 15

10

Rule of Thumb

The best operating condition lies between


minimum and total reflux.

As a rule of thumb, the optimum reflux


ratio lies between 1.05 and 1.25 (L/D)min.

Too low of an L/D results in a large number


of equilibrium stages, while too high of an
L/D increases the reboiler duty as well as
the required diameter of the column.
Lecture 15

11

You might also like