Scribd
Upload
220 views

Fiber Distributed Data Interface

FDDI is a 100 Mbps token-passing dual-ring LAN standard that uses fiber optic cable for high bandwidth and distance. It specifies MAC, PHY, PMD and SMT layers. FDDI provides fault tolerance through dual counter-rotating rings, optical bypass switches, and dual homing. A related standard, CDDI, implements FDDI over twisted pair copper.

Uploaded by

lakshay187
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
220 views

Fiber Distributed Data Interface

FDDI is a 100 Mbps token-passing dual-ring LAN standard that uses fiber optic cable for high bandwidth and distance. It specifies MAC, PHY, PMD and SMT layers. FDDI provides fault tolerance through dual counter-rotating rings, optical bypass switches, and dual homing. A related standard, CDDI, implements FDDI over twisted pair copper.

Uploaded by

lakshay187
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 23

Fiber Distributed Data

Interface
• The Fiber Distributed Data Interface (FDDI)
specifies a 100-Mbps token-passing, dual-ring LAN
using fiber-optic cable.
• FDDI is frequently used as high-speed backbone
technology because of its support for high
bandwidth and greater distances than copper.
• It should be noted that relatively recently, a related
copper specification, called Copper Distributed
Data Interface (CDDI), has emerged to provide
100-Mbps service over copper.
• CDDI is the implementation of FDDI protocols over
twisted-pair copper wire
FDDI …
• FDDI uses dual-ring architecture with traffic on
each ring flowing in opposite directions (called
counter-rotating).
• The dual rings consist of a primary and a
secondary ring.
• During normal operation, the primary ring is
used for data transmission, and the secondary
ring remains idle.
• The primary purpose of the dual rings is to
provide superior reliability and robustness.
FDDI Uses Counter-Rotating
Primary and Secondary Rings
Standards
• FDDI was developed by the American National Standards
Institute (ANSI) X3T9.5 standards committee in the mid-
1980s. At the time, high-speed engineering workstations
were beginning to tax the bandwidth of existing local-area
networks (LANs) based on Ethernet and Token Ring.
• A new LAN media was needed that could easily support
these workstations and their new distributed applications.
• At the same time, network reliability had become an
increasingly important issue as system managers migrated
mission-critical applications from large computers to
networks.
• FDDI was developed to fill these needs. After completing the
FDDI specification, ANSI submitted FDDI to the International
Organization for Standardization (ISO), which created an
international version of FDDI that is completely compatible
with the ANSI standard version.
FDDI Transmission Media
• FDDI uses optical fiber as the primary transmission medium, but it
also can run over copper cabling. As mentioned earlier, FDDI over
copper is referred to as Copper-Distributed Data Interface (CDDI).
• Optical fiber has several advantages over copper media. In
particular, security, reliability, and performance all are enhanced
with optical fiber media because fiber does not emit electrical
signals.
• A physical medium that does emit electrical signals (copper) can be
tapped and therefore would permit unauthorized access to the data
that is transiting the medium.
• In addition, fiber is immune to electrical interference from radio
frequency interference (RFI) and electromagnetic interference
(EMI).
• Fiber historically has supported much higher bandwidth (throughput
potential) than copper, although recent technological advances have
made copper capable of transmitting at 100 Mbps.
• Finally, FDDI allows 2 km between stations using multimode fiber,
and even longer distances using a single mode.
FDDI defines two types of optical
fiber: single-mode and multimode.
• A mode is a ray of light that enters the
fiber at a particular angle.
• Multimode fiber uses LED as the light-
generating device, while single-mode fiber
generally uses lasers.
FDDI Specifications

• FDDI's four specifications are


• the Media Access Control (MAC),
• Physical Layer Protocol (PHY),
• Physical-Medium Dependent (PMD),
• and Station Management (SMT)
specifications
The MAC specification
• The MAC specification defines how the
medium is accessed, including frame
format, token handling, addressing,
algorithms for calculating cyclic
redundancy check (CRC) value, and error-
recovery mechanisms.
PHY specification
• The PHY specification defines data
encoding/decoding procedures, clocking
requirements, and framing, among other
functions.
PMD specification
• The PMD specification defines the
characteristics of the transmission
medium, including fiber-optic links, power
levels, bit-error rates, optical components,
and connectors.
SMT specification
• The SMT specification defines FDDI
station configuration, ring configuration,
and ring control features, including station
insertion and removal, initialization, fault
isolation and recovery, scheduling, and
statistics collection.
FDDI is similar to IEEE 802.3 Ethernet and IEEE 802.5 Token Ring in
its relationship with the OSI model. Its primary purpose is to provide
connectivity between upper OSI layers of common protocols and the
media used to connect network devices
FDDI Station-Attachment Types

FDDI defines four types of devices:


• single-attachment station (SAS),
• dual-attachment station (DAS),
• single-attached concentrator (SAC),
• and dual-attached concentrator (DAC).
An FDDI concentrator (also called a dual-attachment concentrator
[DAC]) is the building block of an FDDI network. It attaches directly to
both the primary and secondary rings and ensures that the failure or
power-down of any SAS does not bring down the ring. This is
particularly useful when PCs, or similar devices that are frequently
powered on and off, connect to the ring.
FDDI Fault Tolerance

• FDDI provides a number of fault-tolerant


features. In particular, FDDI's dual-ring
environment, the implementation of the
optical bypass switch, and dual-homing
support make FDDI a resilient media
technology.
Optical Bypass Switch
• An optical bypass switch provides continuous dual-ring
operation if a device on the dual ring fails. This is used
both to prevent ring segmentation and to eliminate failed
stations from the ring.
• The optical bypass switch performs this function using
optical mirrors that pass light from the ring directly to the
DAS device during normal operation.
• If a failure of the DAS device occurs, such as a power-
off, the optical bypass switch will pass the light through
itself by using internal mirrors and thereby will maintain
the ring's integrity.
• The benefit of this capability is that the ring will not enter
a wrapped condition in case of a device failure.
Dual Homing
• Critical devices, such as routers or mainframe hosts, can use a fault-tolerant
technique called dual homing to provide additional redundancy and to help
guarantee operation. In dual-homing situations, the critical device is attached
to two concentrators
• One pair of concentrator links is declared the active link; the other pair is
declared passive. The passive link stays in backup mode until the primary link
(or the concentrator to which it is attached) is determined to have failed. When
this occurs, the passive link automatically activates.
FDDI Frame Format
• The FDDI frame format is similar to the format of a Token Ring frame. This
is one of the areas in which FDDI borrows heavily from earlier LAN
technologies, such as Token Ring. FDDI frames can be as large as 4,500
bytes. Figure 8-10 shows the frame format of an FDDI data frame and
token.
FDDI Frame Fields
• Preamble—Gives a unique sequence that prepares each station for an
upcoming frame.
• Start delimiter—Indicates the beginning of a frame by employing a signaling
pattern that differentiates it from the rest of the frame.
• Frame control—Indicates the size of the address fields and whether the frame
contains asynchronous or synchronous data, among other control information.
• Destination address—Contains a unicast (singular), multicast (group), or
broadcast (every station) address. As with Ethernet and Token Ring
addresses, FDDI destination addresses are 6 bytes long.
• Source address—Identifies the single station that sent the frame. As with
Ethernet and Token Ring addresses, FDDI source addresses are 6 bytes long.
• Data—Contains either information destined for an upper-layer protocol or
control information.
• Frame check sequence (FCS)—Is filed by the source station with a calculated
cyclic redundancy check value dependent on frame contents (as with Token
Ring and Ethernet). The destination address recalculates the value to
determine whether the frame was damaged in transit. If so, the frame is
discarded.
• End delimiter—Contains unique symbols; cannot be data symbols that
indicate the end of the frame.
• Frame status—Allows the source station to determine whether an error
occurred; identifies whether the frame was recognized and copied by a
receiving station.
Copper Distributed Data Interface
• Copper Distributed Data Interface (CDDI) is the
implementation of FDDI protocols over twisted-pair
copper wire. Like FDDI, CDDI provides data rates of 100
Mbps and uses dual-ring architecture to provide
redundancy. CDDI supports distances of about 100
meters from desktop to concentrator
• The CDDI standard is officially named the Twisted-Pair
Physical Medium-Dependent (TP-PMD) standard. It is
also referred to as the Twisted-Pair Distributed Data
Interface (TP-DDI), consistent with the term Fiber
Distributed Data Interface (FDDI). CDDI is consistent
with the physical and media-access control layers
defined by the ANSI standard.
• The ANSI standard recognizes only two types of cables
for CDDI: shielded twisted pair (STP) and unshielded
twisted pair (UTP).
Summary

The Fiber Distributed Data Interface


(FDDI) specifies a 100-Mbps token-
passing, dual-ring LAN architecture using
fiber-optic cable. FDDI is frequently
implemented as a high-speed backbone
technology because of its support for high
bandwidth and greater distances than
copper.

You might also like