GI-FI Technology

St.
Martins Engineering College

(Affiliated to JNTUH)
Presentation by,
B.Priyanka
Introduction
o Network Evolution
o What Is GI-FI
o Why GI-FI is used
o Bluetooth & Wi-Fi
o Architecture of GI-FI
o Features of GI-FI
o Applications
o Technology Considerations
o Conclusion
o
04/14/15
Gi-Fi or Gigabit Wireless is the world's first

transceiver integrated on a single chip that
operates at 60GHz on the CMOS process.It allows
wireless transfer of audio and video data up to 5
gigabits per second within a range of 10 meters.
It was developed by the Melbourne University

based laboratories of NICTA (National ICT Australia
Limited), Australias Information and
Communications Technology Research Centre of
Excellence.
04/14/15
Gi-Fi
Wimax
Wi-Fi
Bluetooth
Wireless Access
Cables
Optical Fiber
Transmission medium is required to carry data

from a source to destination.
This transmission can be wired or wireless.
In wired transmission the signal can travel along

the cable from one device to another.
04/14/15
Three types of cables

Twisted pair
Co-axial cables
Fiber optics
These
wired transmission media used for

shortest distances .They can transmit both
audio and video signal.
These
are used in telephone lines and cable

TVs etc.
04/14/15
Wireless Access:
It is a device that allows wireless devices to connect to
a wired network through routers.
Eg: linksys
BLUETOOTH:
It is useful when trasferring the data between two or
more devices that are nearer to each other when speed is
not an issue.
Bit rate is 2.1Mbps.
04/14/15
WI-fi:
It is a wireless network that allows devices such as
computers , laptops or smart phones to connect to a
network via an access point.
WIMAX:
It is also wireless network provides bit rate of 30-40
Mbps.
HTC
first announced wimax enabled mobile phones.

04/14/15
GI-FI means gigabit wireless.
Worlds first transceiver integrated on single chip.
Operates on 60ghz on the CMOS process.
Allows wireless transfer of audio and video data

at upto 5gb per second.
Gi-Fi
is ten times the current maximum wireless

transfer rate usually within a range of 10 meters.
The reason for pushing into GI-FI technology

is because of
Slow data transfer rate
high power consumption
low range of frequency operation
Characteristic
Bluetooth
Wi-Fi
Frequency
2.4 GHz
2.4 GHz
Range
10 meters
100 meters
Data transfer rate 800 Kbps
11 Mbps
Power
consumption
Low
Medium
Primary devices
Mobile phones,PDAs,
Notebook computer,
Consumer
Desktop computers,
electronics,office
Servers
And industrial automation
Devices
Primary users
Traveling employees;
Electronics consumers;
Office and industrial
workers
Corporate campus
users
Gigabit wireless:
The GI-FI integrated wireless

transceiver chip developed at the National ICT Research
Centre, Australia
The chip, just 5mm per side, has a tiny 1mm antenna.
The core components of a GI-FI system is the

subscriber station which available to several access
points .
It supports standard of IEEE 802.15.3C Wireless PAN
The wirelessspan is computer network used for

communication among computer devices (including
telephones and personal digital assistants) close to
one person .
An 802.15.3c based system often uses small antenna

at the subscriber station. The antenna is mounted on
the roof.
It transmits multiple signals simultaneously across

the wireless transmission paths within separate
frequencies to avoid interfere.
It uses ultra wide band Which consists of :

a)High
bit rate
b)High
security
c) Faster
data transmission
High
Low
speed of data transfer
power consumption
High
security
Cost
effective
Small
size
a)
Household appliances
b)
Office appliances
c)
Video information transfer
d)
Huge data file transfer.
Due to less cost of chip so many companies are

looking forward to launch with lower cost.
The Gi-Fi integrated transceiver chip is may

be launched by starting of next year by
NICTA,Australia will be first .
Within five years, we expect Gi-Fi to be

the dominant technology for wireless
networking. By that time it will be fully
mobile,as well as providing low cost,high
broadband access,with very high speed
large files swapped within seconds which
will develop wireless home and office of
future.

GI-FI Technology

Uploaded by

Copyright:

Available Formats

GI-FI Technology

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

GI-FI Technology

Uploaded by

Copyright:

Available Formats

St.

Martins Engineering College

Gi-Fi or Gigabit Wireless is the world's first

It was developed by the Melbourne University

Transmission medium is required to carry data

This transmission can be wired or wireless.

In wired transmission the signal can travel along

Three types of cables

wired transmission media used for

are used in telephone lines and cable

first announced wimax enabled mobile phones.

GI-FI means gigabit wireless.

Worlds first transceiver integrated on single chip.

Operates on 60ghz on the CMOS process.

Allows wireless transfer of audio and video data

is ten times the current maximum wireless

The reason for pushing into GI-FI technology

Data transfer rate 800 Kbps

The GI-FI integrated wireless

The core components of a GI-FI system is the

It supports standard of IEEE 802.15.3C Wireless PAN

The wirelessspan is computer network used for

An 802.15.3c based system often uses small antenna

It transmits multiple signals simultaneously across

It uses ultra wide band Which consists of :

speed of data transfer

Video information transfer

Huge data file transfer.

Due to less cost of chip so many companies are

The Gi-Fi integrated transceiver chip is may

Within five years, we expect Gi-Fi to be

You might also like