Grease

Hardness
Test and
Dropping
Point of
Grease
What is Grease?
Grease Components
Base
Oils
Thickeners
Additives
Grease Anatomy
Function
The function of grease is to remain in
contact with and lubricate moving
surfaces without leaking out under the
force of gravity, centrifugal action or
being squeezed out under pressure. Its
major practical requirement is that it
retains its properties under shear forces
at all temperatures it experiences during
use
Application Suitable for

Grease
Machinery that runs intermittently or is in storage for

an extended period of time. Because grease remains
in place, a lubricating film can instantly form.
Machinery that is not easily accessible for frequent

lubrication. High-quality greases can lubricate
isolated or relatively inaccessible components for
extended periods of time without frequent
replenishing. These greases are also used in sealedfor-life applications such as some electrical motors
and gearboxes.
Machinery
operating
under
extreme
conditions such as high temperatures and
pressures, shock loads or slow speed under
heavy load.
Worn
components. Grease maintains thicker

films in clearances enlarged by wear and can
extend the life of worn parts that were
previously lubricated by oil.
Characteristics
Pumpability
Water
resistance
Consistency
Dropping Point
Oxidation Stability
High Temperature Effects
Low Temperature Effects
Mechanical
Stability Test
Method:
ASTM D-217
ASTM D-1831
ASTM D-217
(Cone Penetration)
Apparatus:
Penetrometer
Procedures
1.
2.
Cone is allowed to sink for 5 sec. under

its own weight into a grease sample of
25C.
The depth of the cone is then read, in
tenths of millimeter.
The further the cone penetrates the

grease, the higher the penetration
result and the softer the grease.
NLGI Grade
NLGI
Consistency
Grade
Penetration
Range
(1/10mm)
Description
Food
Analogy
000
445 475
Fluid
Ketchup
00
400 430
Semi-Fluid
Applesauce
355 385
Very Fluid
Mustard
310 340
Soft
Tomato Paste
265 295
Medium
Peanut Butter
220 250
Medium-Hard
Vegetable Shortening
175 205
Hard
Frozen Yogurt
130 160
Very Hard
Smooth Pat
85 115
Block
Cheddar Cheese
Spread
ASTM D-1831
(Roll Stability Test)
Materials
One-place
model with thermostatic cabin

Temperature controlled by a digital thermo
regulator
165 rpm speed geared motor
Stainless steel cylinder containing the 50g test
grease
Fitted with stainless steel roller which rotates
within the cylinder
Base with roller supports allowing the rotation
Procedures
ASTM D1831 subjects the grease to
shearing by rotating a cylinder containing a
5kg roller at 165 rpm for 2 hours. The change
in penetration at the end of the tests is a
measure of the mechanical stability.
Dropping Point
Method:
ASTM D-566
ASTM D-2265
Materials:
Grease
Cup
Test Tube
Thermometers
400 ml Beaker (with suitable oil as heating
medium)
Metal Rod (6 long, 3/64 1/16 diameter,
polished)
Aluminum Block Oven
Procedur
es
Place the cork on one of the thermometers

so that the tip of the thermometer bulb will be
about 1/8 above the bottom of the grease
cup when the apparatus is assembled. The
other cork is placed equidistant between the
lower end of upper cork and the grease cup this cork will have to be worked and cut to fit
inside the test tube. Suspend the other
thermometer into the oil bath so that its bulb
will be about the same level as the test
thermometer.
Fill the grease cup with a sample of

grease and gently press the grease into the
cup until a small amount is extruded at the
small opening. Using the metal rod, cut a
wedge of grease from the cup by revolving
the cup against the rod and simultaneously
pushing the rod upward. A smooth film of
grease shall remain in the cup.
Assemble the apparatus, start the stirrer and

heat at a rate of 8-12F per minute until the
bath reaches a temperature approximately
30F below the expected dropping point.
Reduce the rate of heating so that the
temperature in the test tube will be within 4F
or less of the bath temperature. As the
temperature increases the grease will slowly
protrude through the orifice of the cup. The
temperature at which a drop of grease falls to
the bottom of the cup is the dropping point. If
the drop has a tailing thread, the test is
continued until it breaks completely.
How to
determine
dropping point?
When the first drop of grease falls through the hole in the bottom
of the cup, this is considered the dropping point of the grease.
DP
( ASTM D566 )
DP
( ASTM D-2265 )
Where:
DP : Dropping point
TT : Thermometer temperature with grease
TB : Bath Thermometer
Factors:
whether
the exposure to high temperature is

continuous or intermittent
whether
cycling
from
high
to
low
temperatures is involved,
evaporation resistance of the grease
design of the lubricated mechanism
Typical Drop Point Ranges

Grease
Temperature ( F )
Calcium Base grease
160 210
Sodium Base grease
275 350
Lithium Base grease
350 400
Bentone Base grease
Over 500
Silicone grease
Over 500
Pumpability. Pumpability is the ability of a

grease to be pumped or pushed through a
system. More practically, pumpability is the
ease with which a pressurized grease can flow
through lines, nozzles and fittings of greasedispensing systems.
Water resistance.This is the ability of a

grease to withstand the effects of water with no
change in its ability to lubricate. A soap/water
lather may suspend the oil in the grease,
forming an emulsion that can wash away or, to
a lesser extent, reduce lubricity by diluting and
changing grease consistency and texture.
Consistency.Grease consistency depends on

the type and amount of thickener used and the
viscosity of its base oil. A grease's consistency
is its resistance to deformation by an applied
force. The measure of consistency is called
penetration. Penetration depends on whether
the consistency has been altered by handling
or working. ASTM D 217 and D 1403 methods
measure penetration of unworked and worked
greases. To measure penetration, a cone of
given weight is allowed to sink into a grease
for five seconds at a standard temperature of
25C (77F).
Dropping point.Dropping point is an

indicator of the heat resistance of grease. As
grease temperature increases, penetration
increases until the grease liquefies and the
desired consistency is lost. The dropping point
is the temperature at which a grease becomes
fluid enough to drip. The dropping point
indicates the upper temperature limit at which
a grease retains its structure, not the
maximum temperature at which a grease may
be used.
Oxidation stability.This is the ability of a

grease to resist a chemical union with oxygen.
The reaction of grease with oxygen produces
insoluble gum, sludges and lacquer-like
deposits that cause sluggish operation,
increased wear and reduction of clearances.
Prolonged exposure to high temperatures
accelerates oxidation in greases.
High-temperature
effects.High
temperatures harm greases more than they
harm oils. Grease, by its nature, cannot
dissipate heat by convection like a circulating
oil. Consequently, without the ability to transfer
away heat, excessive temperatures result in
accelerated oxidation or even carbonization
where grease hardens or forms a crust.
Effective grease lubrication depends on the
grease's consistency. High temperatures induce
softening and bleeding, causing grease to flow
away from needed areas. The mineral oil in
grease can flash, burn or evaporate at
temperatures greater than 177C (350F).
Low-temperature effects.If the temperature

of a grease is lowered enough, it will become
so viscous that it can be classified as a hard
grease. Pumpability suffers and machinery
operation may become impossible due to
torque limitations and power requirements. As
a guideline, the base oil's pour point is
considered the low-temperature limit of a
grease.
Grease. The American Society for Testing

and Materials (ASTM) defines lubricating
grease as: "A solid to semifluid product of
dispersion of a thickening agent in liquid
lubricant. Other ingredients imparting special
properties may be included.
Base Oil. Most greases produced today use

mineral oil as their fluid components. These
mineral oil-based greases typically provide
satisfactory performance in most industrial
applications. In temperature extremes (low or
high), a grease that utilizes a synthetic base
oil will provide better stability.
Thickener. The thickener is a material that, in

combination with the selected lubricant, will
produce the solid to semifluid structure. The
primary type of thickener used in current
grease is metallic soap. These soaps include
lithium, aluminum, clay, polyurea, sodium and
calcium.
Lately,
complex
thickener-type
greases are gaining popularity. They are being
selected because of their high dropping points
and excellent load-carrying abilities.
Additives. Additives can play several roles in

a lubricating grease. These primarily include
enhancing the existing desirable properties,
suppressing
the
existing
undesirable
properties, and imparting new properties. The
most common additives are oxidation and rust
inhibitors, extreme pressure, antiwear, and
friction-reducing agents.

Grease

Uploaded by

Copyright:

Available Formats

Grease

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Grease

Uploaded by

Copyright:

Available Formats

What are the components of grease?

What are the components of grease?

What are the functions of grease?

What are the functions of grease?

Hardness

Application Suitable for

Machinery that runs intermittently or is in storage for

Machinery that is not easily accessible for frequent

components. Grease maintains thicker

Cone is allowed to sink for 5 sec. under

The further the cone penetrates the

model with thermostatic cabin

Place the cork on one of the thermometers

Fill the grease cup with a sample of

Assemble the apparatus, start the stirrer and

the exposure to high temperature is

Typical Drop Point Ranges

Calcium Base grease

Sodium Base grease

Lithium Base grease

Bentone Base grease

Pumpability. Pumpability is the ability of a

Water resistance.This is the ability of a

Consistency.Grease consistency depends on

Dropping point.Dropping point is an

Oxidation stability.This is the ability of a

Low-temperature effects.If the temperature

Grease. The American Society for Testing

Base Oil. Most greases produced today use

Thickener. The thickener is a material that, in

Additives. Additives can play several roles in

You might also like