Parametric Equations & Polar Coordinates

10
PARAMETRIC EQUATIONS
AND POLAR COORDINATES
PARAMETRIC EQUATIONS & POLAR COORDINATES
So far, we have described plane curves

by giving:
y as a function of x [y = f(x)] or x as a function of y
[x = g(y)]
A relation between x and y that defines y implicitly
as a function of x [f(x, y) = 0]
In this chapter, we discuss

two new methods for describing
curves.
Some curvessuch as the cycloidare

best handled when both x and y are given in
terms of a third variable t called a parameter
[x = f(t), y = g(t)].
POLAR COORDINATES
Other curvessuch as the cardioidhave

their most convenient description when
we use a new coordinate system, called
the polar coordinate system.
10.1
Curves Defined by
Parametric Equations
In this section, we will learn about:
Parametric equations and generating their curves.
INTRODUCTION
Imagine that a particle moves along

the curve C shown here.
It is impossible to describe C by an equation
of the form y = f(x).
This is because
C fails the Vertical
Line Test.
INTRODUCTION
However, the x- and y-coordinates

of the particle are functions of time.
So, we can write x = f(t) and y = g(t).
INTRODUCTION
Such a pair of equations is often

a convenient way of describing a curve
and gives rise to the following definition.
Suppose x and y are both given as functions

of a third variable t (called a parameter) by
the equations
x = f(t) and y = g(t)
These are called parametric equations.
PARAMETRIC CURVE
Each value of t determines a point (x, y),

which we can plot in a coordinate plane.
As t varies, the point (x, y) = (f(t), g(t)) varies

and traces out a curve C.
This is called a parametric curve.
PARAMETER t
The parameter t does not necessarily

represent time.
In fact, we could use a letter other than t

for the parameter.
PARAMETER t
However, in many applications of

parametric curves, t does denote time.
Thus, we can interpret (x, y) = (f(t), g(t))

as the position of a particle at time t.
PARAMETRIC CURVES
Example 1
Sketch and identify the curve defined

by the parametric equations
x = t2 2t
y=t+1
PARAMETRIC CURVES
Example 1
Each value of t gives a point on the curve,

as in the table.
For instance, if t = 0,
then x = 0, y = 1.
So, the corresponding
point is (0, 1).
PARAMETRIC CURVES
Example 1
Now, we plot the points (x, y) determined by

several values of the parameter, and join them
to produce a curve.
PARAMETRIC CURVES
Example 1
A particle whose position is given by

the parametric equations moves along
the curve in the direction of the arrows as t
increases.
PARAMETRIC CURVES
Example 1
Notice that the consecutive points marked

on the curve appear at equal time intervals,
but not at equal distances.
That is because
the particle slows down
and then speeds up
as t increases.
PARAMETRIC CURVES
Example 1
It appears that the curve traced out by

the particle may be a parabola.
We can confirm this
by eliminating
the parameter t,
as follows.
PARAMETRIC CURVES
Example 1
We obtain t = y 1 from the equation y = t + 1.

We then substitute it in the equation x = t2 2t.
This gives: x = t2 2t
= (y 1)2 2(y 1)
= y2 4y + 3
So, the curve represented by the given parametric
equations is the parabola x = y2 4y + 3
PARAMETRIC CURVES
This equation in x and y describes

where the particle has been.
However, it doesnt tell us when the particle

was at a particular point.
ADVANTAGES
The parametric equations have an

advantagethey tell us when the particle
was at a point.
They also indicate the direction of the motion.
PARAMETRIC CURVES
No restriction was placed on the parameter t

in Example 1.
So, we assumed t could be any real number.
Sometimes, however, we restrict t
to lie in a finite interval.
PARAMETRIC CURVES
For instance, the parametric curve

x = t2 2t
y=t+1
0 t 4
shown is a part of the parabola in Example 1.

It starts at the point
(0, 1) and ends at
the point (8, 5).
PARAMETRIC CURVES
The arrowhead indicates the direction

in which the curve is traced as t increases
from 0 to 4.
INITIAL & TERMINAL POINTS
In general, the curve with parametric

equations
x = f(t)
y = g(t)
atb
has initial point (f(a), g(a)) and terminal point

(f(b), g(b)).
PARAMETRIC CURVES
Example 2
What curve is represented by the following

parametric equations?
x = cos t
y = sin t
0 t 2
PARAMETRIC CURVES
Example 2
If we plot points, it appears the curve

is a circle.
We can confirm this by eliminating t.
PARAMETRIC CURVES
Example 2
Observe that:
x2 + y2 = cos2 t + sin2 t = 1
Thus, the point (x, y) moves

on the unit circle x2 + y2 = 1
PARAMETRIC CURVES
Example 2
Notice that, in this example, the parameter t

can be interpreted as the angle (in radians),
as shown.
PARAMETRIC CURVES
Example 2
As t increases from 0 to 2, the point

(x, y) = (cos t, sin t) moves once around
the circle in the counterclockwise direction
starting from
the point (1, 0).
PARAMETRIC CURVES
Example 3
What curve is represented by the given

parametric equations?
x = sin 2t
y = cos 2t
0 t 2
PARAMETRIC CURVES
Example 3
Again, we have:
x2 + y2 = sin2 2t + cos2 2t = 1
So, the parametric equations again

represent the unit circle x2 + y2 = 1
PARAMETRIC CURVES
Example 3
However, as t increases from 0 to 2,

the point (x, y) = (sin 2t, cos 2t) starts at (0, 1),
moving twice around the circle in
the clockwise direction.
PARAMETRIC CURVES
Examples 2 and 3 show that different

sets of parametric equations can represent
the same curve.
So, we distinguish between:
A curve, which is a set of points
A parametric curve, where the points
are traced in a particular way
PARAMETRIC CURVES
Example 4
Find parametric equations

for the circle with center (h, k)
and radius r.
PARAMETRIC CURVES
Example 4
We take the equations of the unit circle

in Example 2 and multiply the expressions
for x and y by r.
We get:
x = r cos t
y = r sin t
You can verify these equations represent a circle with

radius r and center the origin traced counterclockwise.
PARAMETRIC CURVES
Example 4
Now, we shift h units in the x-direction

and k units in the y-direction.
PARAMETRIC CURVES
Example 4
Thus, we obtain the parametric equations

of the circle with center (h, k) and radius r :
x = h + r cos t
y = k + r sin t
0 t 2
PARAMETRIC CURVES
Example 5
Sketch the curve with parametric

equations
x = sin t
y = sin2 t
PARAMETRIC CURVES
Example 5
Observe that y = (sin t)2 = x2.
Thus, the point (x, y) moves on

the parabola y = x2.
PARAMETRIC CURVES
Example 5
However, note also that, as -1 sin t 1,

we have -1 x 1.
So, the parametric equations represent only

the part of the parabola for which -1 x 1.
PARAMETRIC CURVES
Example 5
Since sin t is periodic, the point

(x, y) = (sin t, sin2 t) moves back and forth
infinitely often along the parabola from
(-1, 1) to (1, 1).
GRAPHING DEVICES
Most graphing calculators and computer

graphing programs can be used to graph
curves defined by parametric equations.
In fact, its instructive to watch a parametric
curve being drawn by a graphing calculator.
The points are plotted in order as the corresponding
parameter values increase.
GRAPHING DEVICES
Example 6
Use a graphing device to graph

the curve
x = y4 3y2
If we let the parameter be t = y,

we have the equations
x = t4 3t2
y=t
GRAPHING DEVICES
Example 6
Using those parametric equations,

we obtain this curve.
GRAPHING DEVICES
Example 6
It would be possible to solve the given

equation for y as four functions of x and
graph them individually.
However, the parametric equations provide
a much easier method.
GRAPHING DEVICES
In general, if we need to graph

an equation of the form x = g(y),
we can use the parametric equations
x = g(t)
y=t
GRAPHING DEVICES
Notice also that curves with equations y = f(x)

(the ones we are most familiar withgraphs
of functions) can also be regarded as curves
with parametric equations
x=t
y = f(t)
GRAPHING DEVICES
Graphing devices are particularly

useful when sketching complicated
curves.
COMPLEX CURVES
For instance,
these curves would
be virtually impossible
to produce by hand.
CAD
One of the most important uses of

parametric curves is in computer-aided
design (CAD).
BZIER CURVES
In the Laboratory Project after Section 10.2,

we will investigate special parametric curves
called Bzier curves.
These are used extensively in manufacturing,
especially in the automotive industry.
They are also employed in specifying the shapes
of letters and other symbols in laser printers.
CYCLOID
Example 7
The curve traced out by a point P on

the circumference of a circle as the circle rolls
along a straight line is called a cycloid.
CYCLOIDS
Example 7
Find parametric equations for

the cycloid if:
The circle has radius r and rolls along the x-axis.
One position of P is the origin.
CYCLOIDS
Example 7
We choose as parameter the angle of rotation

of the circle ( = 0 when P is at the origin).
Suppose the circle has rotated through
radians.
CYCLOIDS
Example 7
As the circle has been in contact with

the line, the distance it has rolled from
the origin is:
| OT | = arc PT = r
Thus, the center of
the circle is C(r, r).
CYCLOIDS
Example 7
Let the coordinates of P be (x, y).

Then, from the figure,
we see that:
x = |OT| |PQ|
= r r sin
= r( sin)
y = |TC| |QC|
= r r cos
= r(1 cos )
CYCLOIDS
E. g. 7Equation 1
Therefore, parametric equations of

the cycloid are:
x = r( sin )
y = r(1 cos )
CYCLOIDS
Example 7
One arch of the cycloid comes from

one rotation of the circle.
So, it is described by 0 2.
CYCLOIDS
Example 7
Equations 1 were derived from the figure,

which illustrates the case where 0 < < /2.
However, it can be seen
that the equations are
still valid for other values
of .
PARAMETRIC VS. CARTESIAN
Example 7
It is possible to eliminate the parameter

from Equations 1.
However, the resulting Cartesian equation
in x and y is:
Very complicated
Not as convenient to work with
CYCLOIDS
One of the first people to study

the cycloid was Galileo.
He proposed that bridges be built in the shape.
He tried to find the area under one arch of a cycloid.
BRACHISTOCHRONE PROBLEM
Later, this curve arose in connection with

the brachistochrone problemproposed by
the Swiss mathematician John Bernoulli
in 1696:
Find the curve along which a particle will slide in
the shortest time (under the influence of gravity) from
a point A to a lower point B not directly beneath A.
BRACHISTOCHRONE PROBLEM
Bernoulli showed that, among all possible

curves that join A to B, the particle will take
the least time sliding from A to B if the curve
is part of an inverted arch of a cycloid.
TAUTOCHRONE PROBLEM
The Dutch physicist Huygens had already

shown that the cycloid is also the solution to
the tautochrone problem:
No matter where a particle is placed on an inverted
cycloid, it takes the same time to slide to the bottom.
CYCLOIDS & PENDULUMS
He proposed that pendulum clocks

(which he invented) swing in cycloidal
arcs.
Then, the pendulum takes the same time to make
a complete oscillationwhether it swings through
a wide or a small arc.
PARAMETRIC CURVE FAMILIES
Example 8
Investigate the family of curves with

parametric equations
x = a + cos t
y = a tan t + sin t
What do these curves have in common?

How does the shape change as a increases?
Example 8
We use a graphing device to produce

the graphs for the cases a =
-2, -1, -0.5, -0.2, 0, 0.5, 1, 2
Example 8
Notice that:
All the curves (except for a = 0) have two branches.
Both branches approach the vertical asymptote x = a
as x approaches a from the left or right.
LESS THAN -1
Example 8
When a < -1, both branches are

smooth.
REACHES -1
Example 8
However, when a reaches -1, the right

branch acquires a sharp point, called
a cusp.
BETWEEN -1 AND 0
Example 8
For a between -1 and 0, the cusp turns

into a loop, which becomes larger as a
approaches 0.
EQUALS 0
Example 8
When a = 0, both branches come

together and form a circle.
BETWEEN 0 AND 1
Example 8
For a between 0 and 1, the left branch

has a loop.
EQUALS 1
Example 8
When a = 1, the loop shrinks

to become a cusp.
GREATER THAN 1
Example 8
For a > 1, the branches become smooth

again.
As a increases further,
they become less
curved.
Example 8
Notice that curves with a positive are

reflections about the y-axis of the
corresponding curves with a negative.
CONCHOIDS OF NICOMEDES
Example 8
These curves are called conchoids

of Nicomedesafter the ancient Greek
scholar Nicomedes.
CONCHOIDS OF NICOMEDES
Example 8
He called them so because the shape

of their outer branches resembles that
of a conch shell or mussel shell.

Parametric Equations & Polar Coordinates

Uploaded by

Copyright:

Available Formats

Parametric Equations & Polar Coordinates

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Parametric Equations & Polar Coordinates

Uploaded by

Copyright:

Available Formats

10

PARAMETRIC EQUATIONS & POLAR COORDINATES

So far, we have described plane curves

PARAMETRIC EQUATIONS & POLAR COORDINATES

In this chapter, we discuss

Some curvessuch as the cycloidare

Other curvessuch as the cardioidhave

PARAMETRIC EQUATIONS & POLAR COORDINATES

Imagine that a particle moves along

However, the x- and y-coordinates

Such a pair of equations is often

Suppose x and y are both given as functions

These are called parametric equations.

Each value of t determines a point (x, y),

As t varies, the point (x, y) = (f(t), g(t)) varies

The parameter t does not necessarily

In fact, we could use a letter other than t

However, in many applications of

Thus, we can interpret (x, y) = (f(t), g(t))

Sketch and identify the curve defined

Each value of t gives a point on the curve,

Now, we plot the points (x, y) determined by

A particle whose position is given by

Notice that the consecutive points marked

It appears that the curve traced out by

We obtain t = y 1 from the equation y = t + 1.

This equation in x and y describes

However, it doesnt tell us when the particle

The parametric equations have an

No restriction was placed on the parameter t

For instance, the parametric curve

shown is a part of the parabola in Example 1.

The arrowhead indicates the direction

INITIAL & TERMINAL POINTS

In general, the curve with parametric

has initial point (f(a), g(a)) and terminal point

What curve is represented by the following

If we plot points, it appears the curve

Thus, the point (x, y) moves

Notice that, in this example, the parameter t

As t increases from 0 to 2, the point

What curve is represented by the given

So, the parametric equations again

However, as t increases from 0 to 2,

Examples 2 and 3 show that different

Find parametric equations

We take the equations of the unit circle

You can verify these equations represent a circle with

Now, we shift h units in the x-direction

Thus, we obtain the parametric equations

Sketch the curve with parametric

Observe that y = (sin t)2 = x2.

Thus, the point (x, y) moves on

However, note also that, as -1 sin t 1,

So, the parametric equations represent only

Since sin t is periodic, the point

Most graphing calculators and computer

Use a graphing device to graph