Scribd
Upload
371 views2 pages

LTE Call Scenario

The document describes an LTE call scenario where: 1. The PCRF sends a message to the PGW with QoS details for a bearer. 2. The PGW sends a request to establish a dedicated bearer to the MME including the QoS. 3. The bearer request is forwarded and the MME builds a session configuration with a bearer ID.

Uploaded by

Sameh Shebl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
371 views2 pages

LTE Call Scenario

The document describes an LTE call scenario where: 1. The PCRF sends a message to the PGW with QoS details for a bearer. 2. The PGW sends a request to establish a dedicated bearer to the MME including the QoS. 3. The bearer request is forwarded and the MME builds a session configuration with a bearer ID.

Uploaded by

Sameh Shebl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 2

LTE call Scenario

UE

ENodeB

MME

SGW

PGW
2

PCRF
1

1. PCRF sends control and charging message Decision provision message


indicates QoS for Bearer to PGW.
2. PGW sends create Dedicated Bearer request message including QoS to be
used by UE.
3. Forward dedicated bearer request.
4. MME builds set of session management configuration including bearer ID.
5. EnodeB uses the bearer Set up information to ensure necessary QoS by
scheduling of user packets.

EPS Bearer
** Bearer means an IP
Packet flow with identified
QoS between Gateway and
UE.
** Multiple bearers could
be assigned to one user for
example if user engaged in
VOIP while at same time
performing FTP so VOIP
Bearer will have necessary
QoS for voice calls while
best effort bearer will be
suitable for web browsing
and FTP sessions.

You might also like