Classification of Dyes

2004
Introduction to Coloration & Finishing

1
Dye classification
Dyeing processes
Daniel 2004
2004
2
You can not assume that to dye any piece of fabric
to a given colour, all you need to do is use a dye of
that particular colour.
No dye will dye all textile fabrics satisfactorily.
This means, simply, that you must choose a dye
that will suit the material (or a material that will suit
the dye).
2004
3
Classification of Dyes
No single class of dye can dye all fibres.
A specific class of dye can only be
applied to a given type of textile fibre.
2004
4
Dye for Cellulosic Fibres:
Direct Dyes
Azoic Dyes
Reactive Dyes
Sulphur dyes
Vat Dyes
2004
5
Classification of dyes
Dye
Class
General description
Main
application
Direct Simple application;
cheap; complete
colour range;
moderate colour
fastness but can be
improved by after-
treatment with copper
salts & cationic
fixing agents.
Mainly used for
cellulosic fibres;
can also be
applied on
rayon, silk &
wool.
2004
6
DIRECT DYES
Direct dyes for Cotton, Viscose, Silk & Nylon
Easy to dye - require only cooking salt & very
hot to boiling water.
Dyes have a good light fastness but only
moderate wash fastness .
It is possible to improve on wash fastness by
after-treatment of dyed article with dye-fixing
agent.
These dyes are principally used for not so
expansive products or product with fewer
washes such as T-shirts, curtains & theatre
productions.
2004
7
DIRECT DYES
Yellow Pink Brown Turquoise
Orange Red Violet Black
Fushia Grey Green
Forrest
Green
Scarlet Blue Wine China Blue
2004
8
Dye Class General description
Main
application
Azoic
(Naphthol)
Complicated application;
limited colour range (red,
orange, navy among the
best); bright shade at
moderate cost; generally
good wet fastness but
moderate to poor dry
cleaning & rubbing fastness;
also called naphthol dye due
to the use of naphthol, or ice
colour because of the usage
of ice during application.
Mainly
applied on
cellulosic
fibres,
especially
on brilliant
red shade.

2004
9
Azo Dye Synthesis
Coupling
Blue component can be
coupled with yellow or
green component to form
two different dyestuffs.
2004
10
AZOIC DYES
The word 'Azoic' is the distinguishing name
given to insoluble azo dyes that are not applied
directly as dyes, but are actually produced
within the fibre itself.
This is done with impregnating the fibre with
one component of the dye, followed by
treatment in another component, thus forming
the dye within the fibre.
NH
2
NO
2
CH
3
HO C
O
NH
2004
11
AZOIC DYES
The formation of this insoluble dye within
the fabric makes it very fast to washing.
The deposition of the dye on the surface of
the fibre produces poor rub fastness, but
once the loose dye is removed by boiling
the fabric in soap, the dyeing becomes
one of the fastest available.
2004
12
AZOIC DYES
Normally it is dyed in cold for all natural fibers
Naphtol dyes are not sold in the form of a
"finished dye" but in form of their components
(Insoluble azo base & fast colour coupling
compound) which combine on the fibre to
produce a water insoluble azo dye of
exceptional fastness properties.
2004
13
The following chart of basic range shows only a very limited number of colours
that can be obtained by using combinations of Naphtol & Diazo.
G D or AS BO BT GR
ORANGE GC
CHROME
YELLOW
ORANGE RED ORANGE
PALE
BROWN
APRICOT
RED RC
CADMIUM
YELLOW
BRILLIANT RED DEEP RED
RED B
YELLOW
OCHRE
CRIMSON
CRIMSON
LAKE

BORDEAUX GP
REDDISH
YELLOW
CLARET BORDEAUX
VIOLET B
CHROME
YELLOW
VIOLET DARK VIOLET
BLUE BB OR 3B
GOLDEN
YELLOW
BLUE NAVY BLUE
DARK
BROWN
GREEN
GREEN BB RED RUST BLUE GREEN DARK GREEN
GREEN GT LEAF GREEN BLUE GREEN
BLACK B BLACK BLACK BLACK
DIAZO SALT NAPHTOL
2004
14
Dye
Class
General description
Main
application
Vat Difficult to apply (requires
reduction treatment to make
soluble in water & oxidation to
resume insoluble state after
dyeing); most expensive;
incomplete colour range (strong
in blue & green but weak in
brilliant red); good all round
fastness except indigo &
sulphurised vat species; tending
to decrease in popularity due to
increasing use of reactive dyes.
Commonly
used for high
quality cotton
goods, e.g.
towel;
specially used
in the dyeing
of denim
fabric.
2004
15
VAT DYES
INDIGO, probably the oldest dye
known to man, is one of the most
important members of this group.
Natural indigo extracted from the
plant 'Indigofera tinctorie' was
used by the Egyptians in 200 BC.
The first synthetic indigo was
introduced to the textile trade in
1897 & had the effect of
completely replacing the natural
product.
2004
16
VAT DYES
Although the vat dyes may be divided into 3
chemical groups, they are similar in that they are
insoluble in water & become water soluble
when reduced in the presence of an alkali.
After dyeing, the fabric is oxidized & the dye
again becomes water insoluble.
Because of the time consuming & costly
procedure in reducing vat dye into a water-
soluble complex, dye manufacturers have
produced a stabilized water-soluble vat dye.
2004
17
VAT DYES
This dye can be applied to
cotton & viscose rayon by
the methods used by
applying direct cotton
dyes.
After the dyeing, a simple
treatment restores the vat
dye to its normal insoluble
state.
Solubilized vat dyes have
an affinity for cellulose &
animal fibres.
2004
18
VAT DYES - USE:
Vat dyes are used in cotton dyeing where high
wash & boil fastness required.
Because of the high alkali concentration in the dye
bath, pure vat dyes cannot be used on animal
fibres, (wool, natural silk, & various hairs).
Bright red is absent in vat dye range.
Solubilized vat dyes, not requiring the presence of
alkali, can be used for dyeing on animal fibres.
Because they are dyed at low temperatures, they
are used in Indonesian batik dyeing for green
shades.
2004
19
VAT DYES
When the ultimate in wash & boil fastness
is required.
Also used to dye over fibre reactive dyes for
multi-layered dyeing.
YELLOW GREEN
ORANGE OLIVE B
RED BROWN
BLUE NAVY
VIOLET BLACK
2004
20
Dye
Class
General description
Main
application
Sulphur Difficult to apply
(application similar to vat
dyes); cheap particularly for
dark shade; incomplete
black, navy, khaki & colour
range (strong in brown but
no bright shade); poor
washing & rubbing fastness
& sensitive to chlorine; may
cause fabric rendering of
cellulose upon storage
(aging).
Mostly used for
heavy cellulosic
goods in dark
shades.

2004
21
SULPHUR DYES
The first Sulphur dye was discovered in France
in 1873, & further work done by Raymond Videl
enabled the manufacture of 'Videl black".
Its outstanding fastness to light, washing &
boiling far surpassed any cotton black known at
that time.
The general disadvantage of the Sulphur dyes
that they produce dull shades & lack a red.
2004
22
SULPHUR DYES
The main advantage lays in their
cheapness, ease of application & good
wash-fastness.
In their normal state, Sulphur dyes are
insoluble in water but are readily soluble in
the solution of Sodium Sulphide.
In this form they have high affinity to the all
cellulose fibres.
2004
23
SULPHUR DYES - USE:
The use of Sulphur dyes is restricted to
dull brown, Khaki & Navy shades,
where a good wash but not boil-fastness
is required.
Most Khaki & Navy overalls are dyed
with Sulphur dyes.
2004
24
SULPHUR DYES - USE:
An outstanding member of this family is
Sulphur black.
It dyes all cellulose fibres, but particularly linen &
jute, to a lustrous & deep black with excellent
wash & light fastness.
Sulphur dyes are dyed from a dye bath
containing Sodium Sulphide & common or
Glaubers Salt, & are oxidized by airing or with
some oxidizing agents (Sodium Bichromate or
Hydrogen Peroxide) in a fresh bath.
2004
25
Dye
Class
General description Main application
Reactive Easy application;
moderate price;
complete colour range;
good fastness due to
direct reaction with
fibres.
Commonly used for
all cellulosic goods
especially in knitted
fabric batchwise
dyeing; selective
dyes can also be
applied on wool, silk
& rayon; increasingly
used in printing due
to good fastness.
2004
26
REACTIVE DYES
This is an entirely class of dye introduced
to the market in 1956.
They react chemically with the fibre being
dyed & if correctly applied, cannot be
removed by washing or boiling.
2004
27
REACTIVE DYES
The main feature of the
dyestuff is its low affinity
to cellulose; therefore
large amounts of salt are
required to force its
deposition on he fabric.
2004
28
REACTIVE DYES
After this has been
achieved, addition of alkali
causes the deposited dyes
to react with the fibre.
Only a successfully
concluded reaction
guarantees a fast dyeing.
Basically there are two
types of reactive dyes: the
cold dyeing & hot dyeing
types.
2004
29
REACTIVE DYES - USE:
Reactive dyes are used
where bright dyeing with
high light & wash fastness
is required.
Cold dyeing is used
extensively in batik work.
Although some reactive
dyestuffs have been
specially modified to dye
wool, their main usage is
in dyeing cotton linen &
viscose rayon.
2004
30
REACTIVE DYES
Cold water fibre
reactive dyes, suitable
for dyeing on cotton,
silk, jute, rayon &
hessian.
Cannot be used on
synthetics or fabric
that has been coated
with resin or drip-dry
finish.
Yellow 2GL
Golden Yellow 2RL
Orange 2R
Scarlet
Red BG (primary)
Red 4B (bluish red)
Red 8B (magenta)
Rubinole 5B
Brilliant Blue 2R
Brilliant Blue BL
Violet 2R
Turquoise 2G
Navy GRL
Brown 2R
Brilliant Green BL
Black B (blue base)
Black 2B (green base)
2004
31
Dye for Protein Fibres:
Acid Dyes
Metal-
complex Dyes
Chrome Dyes
2004
32
Dye
Class
General
description
Main
application
Acid Easy application;
complete colour
range with very
good bright shades;
fastness properties
may vary among
individual dyes.
Commonly
used for wool,
silk & nylon.

2004
33
ACID DYES
These dyes comprise a large number of dyes used
for the dyeing of wool, silk & nylon.
They vary considerably in their basic chemical
structure, but have one common feature - they dye
from an acid dye bath.
All acid dyes can be grouped in 3 sub groups:
a. Level dyeing acid dyes
b. Acid milling dyes
c. Pre-metalized dyes
2004
34
ACID DYES
a. Level dyeing acid dyes:
These dyes produce bright dyeing.
The main feature is their good leveling
properties.
They are dyed from a dye bath containing
strong acids (Sulphuric or Formic acid).
These dyes exhibit low wash & light
fastness.
2004
35
ACID DYES
b. Acid milling dyes:
Selected because of their high & light fastness & are
extensively used for dyeing woolen fabrics that are
subsequently milled.
These dyes require great care in application because
uneven dyeings are difficult or impossible to rectify.
The dye bath requires the presence of weak acid
(acetic acid) or acid releasing salts (ammonium
sulphate or ammonium acetate) from which acid is
liberated during dyeing.
2004
36
ACID DYES
c. Pre-metalized dyes
These dyes represent an extension of mordant
dyes.
The metal component being already
incorporated in the dye during manufacturing
process.
Very good light fastness even in pale shades
2004
37
ACID DYES - USE:
The family of acid dyes is very large & diverse,
varying widely in their methods of dyeing,
application & end use of the dyed fabric.
A choice of dyes should be made considering
sometimes-incompatible factors: - level dyeing,
fastness, brightness & ease of application.
Care must be taken to use the appropriate method
as prescribed for a given dye.
A number of acid dyes are also used to dye nylon.

2004
38
ACID DYES for Wool, Nylon & Silk
Selection of milling & pre-metallised
dyes. Dyeing at boil with addition of
Acetic Acid. Bright strong colours.
Mixes of primary colours (*) produce
large range of tertiary colours. Dyes
have very high light & wash fastness.
2004
39
Dye
Class
General description
Main
application
Metal-
complex
Relatively difficult to
apply; expensive;
complete colour range but
duller shade than acid
dyes; good fastness due
to high molecular size &
metal complex structure.
Mainly used
for wool &
Nylon.
2004
40
Dye Class
General
description
Main
application
Chrome
Mordant
Complicated
application;
expensive; complete
colour range but
very dull shade;
good all round
fastness.
Mainly used for
wool products
especially for
the end use of
carpet.
2004
41
Dye for Other Fibres:
Disperse
Dyes for
Polyester,
Acetate
Cationic Dyes
for Acrylic
2004
42
Dye
Class
General description
Main
application
Disperse Require skill in application
(either by carrier or under high
temperature); moderate price;
complete colour range; limited
solubility in water (normally
dispersed in water for
application); good fastness
after reduction clearing
treatment; sublimation
property.
Mostly used
for polyester
& acetate;
can also be
applied on
nylon &
Acrylic.
2004
43
DISPERSE DYES
The introduction of a new regenerated cellulose acetate
fibre in 1920 led to the necessity to develop an entirely new
range of dyes.
It was found that acetate (or Celanese) fibre had hardly any
affinity for water-soluble dyes.
A new dyeing principle was introduced: dyeing with water
dispersed coloured organic substances.
These finely coloured particles are applied in aqueous
dispersion to the acetate material & actually dissolved in the
fibres.
2004
44
DISPERSE DYES - USE:
Basically developed for dyeing of acetate
fibres, Disperse dyes are also used for
dyeing of polyamide (Nylon) & acrylic
(Orlon & Acrylan) fibres.
With the addition of 'carriers' or swelling
agents these dyes are also used in dyeing
of Polyester (Terylene, Dacron, etc.)
2004
45
Dye
Class
General description
Main
application
Basic
(Cationic)
Careful application
required to prevent unlevel
dyeing & adverse effect in
hand-feel; complete colour
range with very good
brilliant shades.
Mainly used
for acrylic.
2004
46
CATIONIC & BASIC DYES
MAUVENE, the first to be discovered by Perkin,
was a basic dye & most of the dyes which
followed, including magenta, malachite green
& crystal violet, were of the same type.
Basic dyes dye wool & silk from a dye bath
containing acid but dye cotton fibres only in the
presence of a mordant usually a metallic salt
that increases affinity of the fabric for the dye.
Basic dyes include the most brilliant of all the
synthetic dyes known, but unfortunately they
have very poor light & wash fastness.
2004
47
CATIONIC & BASIC DYES - USE:
Basic dyes will dye wool & silk from an acid bath &
are used where brightness is of prime
consideration.
With the introduction of cotton dyes possessing
higher fastness properties their use for dyeing
cotton has diminished.
Basic dyes are used extensively for dyeing cut
flowers, dried flowers, also dyeing jute sisal, coir
& wood (toys).
With the introduction of acrylic fibre a new range of
'modified' basic dyes cationic dyes were
perfected for dyeing of this material.
2004
48
Cationic dyes
Cationic dyes for dyeing acrylic (Acrilan, Courtelle, Orlon)
paper, wood & dried flowers.
Also used for dyeing silk & silk flowers in very brilliant
colours.
YELLOW BLUE
ORANGE TURQUOISE
RED VIOLET
PINK GREEN
RHODAMINE BLACK
2004
49
Chronology of Dye Companies
ICI Zeneca BASF
Mobay Miles Bayer
Hoechst
DyStar
Sandoz
Sodyeco
Sandoz
Clariant
Ciba + Geigy Ciba-Geigy Ciba
Crompton and Knowles Yorkshire
Sumitomo
DyStar
2004
50
Colour Formulation
The choice of a specific colour for a particular material
is the responsibility of the textile designer or colourist
who perceives the colour to be in conformity with the
fashion requirement.
It is the job of the textile dyer to match the designer s
colour with the proper dyes or pigments as well as to
meet the colour fastness requirements for the specific
end-use of the material.
In brief,the designer s role is part of the world of
artistry & creativity, while the dyer s role is in the
world of science & technology.
2004
51
Colour Formulation
Matching of colour shades
by the dyer requires the
skilful blending &
formulation of different
dyes & pigments, as well
as an understanding of the
nature of fibres & the
numerous chemicals
needed to carry the dyeing
process.
2004
52
Colour
Formulation
Colour match recipes are first developed on a
small laboratory basis.
Once the dyer has formulated a colour match &
achieved a satisfactory sampling (often known
as the lab-dip), this becomes the standard which
all future dye lots or batches must follow.
2004
53
Colour Formulation
In actual production, however, each dye lot
is more or less different in shade from all
other lots.
This lot-to-lot shade variation is caused by
several factors such as differences in dyes /
auxiliaries concentration, fabric lots &
different dyeing machine settings, etc.
2004
54
Colour Fastness
A good dye must withstand the subsequent treatment
(e.g. laundering, dry cleaning, etc.) or environmental
wearing (e.g.rubbing,light exposure, etc.).
The degree to which a dyed material can withstand
such treatments & wearing is called colour fastness.
No dye or pigment is fast in all colour fastness.
Only a careful selection & formulation of dyes &
auxiliaries can result in a desirable dyeing, & conform
with the colour fastness requirements.
2004
55
Visual Assessment methods
2004
56
Principle of using Grey Scale
The result of a colorfastness test is rated
by visually comparing the difference in
color or the contrast between the un-
treated & treated specimens with the
differences represented by the Scale.
The colorfastness grade is equal to the
gray scale step which is judged to have
the same color or contrast difference.
2004
57
How to use Grey Scale
2004
58
Common colour fastness:
Laundering (washing),
light exposure,
dry cleaning,
perspiration &
rubbing (crocking).
2004
59
Dye classes colour fastness
properties
2004
60
Application of
Pigments
Popular especially in printing.
Advantages :
easy to apply with good shade matching
from lot to lot;
full colour range; &
can be applied on all textile fibres & their
blends.

Classification of Dyes

Uploaded by

Copyright:

Available Formats

Classification of Dyes

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Classification of Dyes

Uploaded by

Copyright:

Available Formats

2004

Introduction to Coloration & Finishing

You might also like