Ipmux-14 V2.0 General Availability: Updated: August-2006

Download as ppt, pdf, or txt
Download as ppt, pdf, or txt
You are on page 1of 22

IPmux-14 v2.

0
General Availability
Author: Ron Agam, [email protected]
Updated: August-2006
2/21
RADs TDMoIP Product Family
Legacy
Service
Ethernet
Service
Network
Link

IPmux-1E

4xFXS/FXO/E&M
4xBRI
1xUser port
-Rate limiting
(optional)
1 UTP/Fiber
Fast Ethernet
IPmux-11 1xT1/E1
2xUser ports
-Rate limiting
-VLAN tag+stack
1 UTP/Fiber
Fast Ethernet

IPmux-14
4xT1/E1 or
1xSerial port
2xUser ports
-Rate limiting
-VLAN tag+stack
1 UTP/Fiber
Fast Ethernet

IPmux-8/16 4/8/16 T1/E1
3xUser ports per
Eth. Module
- Rate limiting
- VLAN tag+stack
1/2 UTP/Fiber
Fast Ethernet

Gmux-2000
196x E1/T1 or
C.OC-3/C.STM-1
2xGE ports (SFP)
1xFE for mgmt
2 UTP/Fiber
Gig Ethernet
Product
3/21
IPmux-14 Product Range
Ordering Option Description
IPmux-14
v2.0 Beta
-TDMoMPLS
-HDLCoIP/HDLCoMPLS
-System clock
-Management of local and remote IPmux via Eth. User port
-Network Loops for North America
IPmux-14/H -Metal chassis. Extended temperature 30 to 65 deg C for
UTP and optical models.
IPmux-14/2 - 2xE1/T1 port option
IPmux-14/SER -Single serial port option
- X.21, V.24/RS-232, RS-530/RS-422, V.35, V.36/RS-449
IPmux-14/T
IPmux-14/A
New Clock Recovery algorithm:
-IPmux-14/T for G.823/4 Traffic Interface
-IPmux-14/A Advanced for G.823/4 Synchronization
Interface
4/21
IPmux-14 v2.0 Features
5/21
Support for MPLS encapsulation
Encapsulates the TDM data with MPLS labels: TDMoMPLS
PW label always present, defines the bundle number
Tunnel label optional, enables handoff to MPLS network
Works opposite: Gmux-2000 v2.0, IPmux-11 V2.0
Applications and benefits:
Bandwidth sensitive networks Saves an overhead of up to
24 bytes compared with TDMoIP
MPLS handoff (where static labels are used)
C
R
C
TDM Payload
CW
MPLS
C
R
C
TDM Payload
CW
UDP
IP
ETH
ETH
6/21
Support for HDLCoPSN
Uses HDLC encapsulation instead of the TDM encapsulation.
Supports HDLCoMPLS or HDLCoIP
Service configurable per bundle
Use TDMoIP for transparent data/voice
Use HDLCoIP for HDLC-based data
Works opposite Gmux-2000 v2.0
Applications are mostly for data:
Port mode frame relay connecting FRAD or routers
Transparent X.25
Transparent PPP connecting routers or other devices
Benefits:
Bandwidth efficiency: no user traffic = no bandwidth used on network
link.
7/21
Support for System Clock
Each E1/T1 can be configured to use the system clock for
transmitting
System clock can be derived from:
LBT E1/T1
Adaptive of a specific E1/T1
Internal
External
System clock has master and fallback sources
Benefits:
Fallback clock for each E1/T1 for clock redundancy
Enables phase lock between E1/T1s: when PBX/Base station
requires all E1/T1 to be synchronized.

System
Clock
IPmux
internal
IPmux
External
IPmux LBT
IPmux
Adaptive
8/21
TDM Fault Propagation
Complete emulation of E1 or T1 includes network
alarm support (previously supported in unframed mode)
Framed: Trail-extended mode in IPmux-14 V2.0
Emulates alarm signals for complete TDM service
Uses out of band signaling to indicate to remote side to activate alarm
Supports LOS, OOF, AIS and RDI
Applications and benefits:
Full leased line emulation with alarms for framed service
Grooming not applicable (no multi-bundling)
PSN
LOS/OOF/AIS or
RAI detected
Propagate alarm
Transmit AIS or RAI
9/21
T1 Smartjack Emulation
FAC1(Facility Type 1) remote loopback
Smart jack emulation
Loop down, loop up
Applicable for North American market only
Benefits:
Supports carrier T1 service including OAM and data without
modifying carrier management systems.
Enables carriers carrier scenarios
10/21
IPmux-14
Ordering Options
11/21
IPmux-14 Ordering Options
+ Specify TDM interface type:
SER for one serial data port
2E1 for two E1 interfaces. Or 2T1.
4E1 for four E1 interfaces. Or 4T1.
& Specify network
Ethernet interface type:
UTP for 10/100BaseT
interface, RJ-45 connector
MM13LC for multimode
1310 nm 100BaseFx
interface, LC connector
SM13LC for single mode
1310 nm 100BaseFx
interface, LC connector
SM15LC for single mode
1550 nm laser, LC connector

% Specify UTP for 10/100BaseT user interface,
RJ-45 connector (compulsory in this version)
IPmux-14
LAN
10/100 Mbps
LAN
1/4 T1/E1
Ethernet
Copper/ Fiber
Always UTP
* Specify Timing type:
IPmux-14 No specific timing
IPmux-14/T Timing for
sub-optimal networks
IPmux-14/A Advanced Timing
Not in combination with /H /2E1
/2T1 or /24 or /SER

IPmux-14/*/+/&/%
IPmux-14/H/+/&/%
IPmux-14/24/&/%
*IPmux-14/H/SER or IPmux-
14/H/2E1 upon special request.
12/21
IPmux-14/H; IPmux-14/2
IPmux-14/H Environmentally hardened
-30 to 65 Celsius
-22 to 149 Fahrenheit
For outdoor installation, street cabinets, cellular towers
IPmux-14/2 2xE1/T1 ports
Better price competitiveness
US end-user price of $1650

IPmux-14/2 TDM ports
IPmux-14/H temperature hardened
13/21
GMux
Nortel
ESU
1800
Nortel
ESU
1800
Nortel
ESU
1800
Nortel
ESU
1800
Operator
1
Operator
2
Operator
3
E1 E1 E1
PSN
TDM
IPmux-14/SER deployment example
Copper to Fiber
converter
Copper to Fiber
converter
14/21
IPmux-14/SER:
IPmux-14 with Serial Data Port
IPmux-14
LAN
10/100 Mbps
LAN
Ethernet
Copper/ Fiber
V.35/V.36/RS-232/
RS-530/X.21
Target Market:
Existing install base of legacy equipment based on
serial communication (Frame Relay; nx64k services)

Pricing: US end user price of $960

Interface Type: Determined by cable.
X.21, V.24/RS-232, RS-530/RS-422
V.35, V.36/RS-449
Timing
DCE The IPmux data port provides transmit and
receive clock signals to the users equipment
DTE2 IPmux transmits and receives data
according to the clock signals provided by the
serial equipment
DTE1 - The IPmux uses its clock to transmit data
towards the user's equipment, and uses the user's
equipment clock to receive data.
Data Rate: N 64 kbps (N = 1, 2, ... 32)
15/21
Transferring Serial Data over
Packet Switched Networks
Packet
Network
(IP/Eth/MPLS)
IPmux-14
IPmux-14
V.35
V.36
RS-232
RS-530
X.21
Legacy device
with serial
interfaces
Legacy device
with serial
interfaces
Over a Packet network
IPmux-14
IPmux-14
V.35
V.36
RS-232
RS-530
X.21
Replacing traditional leased lines with circuit emulation:
-Lowers transmission costs
-Facilitates Migration to NGNs
-Provides an upgrade path to Ethernet service delivery
16/21
Transferring Serial Data over
Packet Switched Networks
Packet
Network
(IP/Eth/MPLS)
TDM
Network
IPmux-14
IPmux-14
FCD-E1LC
FCD-T1LC
V.35
V.36
RS-232
RS-530
X.21
T1/E1
T1/E1
Legacy device
with serial
interfaces
IPmux-14
Gmux-2000
v2.0
Legacy device
with serial
interfaces
Legacy to Next Generation migration:
Migration involves mixed network scenarios where
end-to-end services must be supported
IPmux-14 can groom multi-nx64 bundles
V.35
V.36
RS-232
RS-530
X.21
FCD-T1LC
FCD-E1LC
PSN TDM
17/21
Ordering Options:
IPmux-14/SER Cables
CBL-HS2/V/1/$
Connecting a data port in DCE timing mode to V.35 equipment
CBL-HS/V/2/$
Connecting a data port in DTE1 timing mode to V.35 equipment
CBL-HS/V/3/$
Connecting a data port in DTE2 timing mode to V.35 equipment
CBL-HS2/R/1/$
Connecting a data port in DCE timing mode to V.36/RS-449 equipment
CBL-HS2/R/2/$
Connecting a data port in DTE1 timing mode to V.36/RS-449 equipment
CBL-HS2/R/3/$
Connecting a data port in DTE2 timing mode to V.36/RS-449 equipment
CBL-HS2/X/1/$
Connecting a data port in DCE timing mode to X.21 equipment
$ Specify cable connector type: F for female M for male
These cables convert the IPmux-14 25-pin data port connector into the respective interface.
Cable length is 2m (6 ft).
* For RS-232,
use any off-the-
shelf cable.
18/21
IPmux-14 Timing options for clock
recovery
IPmux-14 IPmux-14/T IPmux-14/A
Main Target Market Toll Bypass
CDMA cellular
backhaul
Toll Bypass
CDMA cellular
backhaul
Cellular Backhaul
requiring Timing:
GSM, UMTS
SLA dictates G.823
sync. interface
PSN Type Well Engineered Suboptimal Suboptimal/Well
Engineered.
Availability Released V2 Beta Q106 V2 Beta Q106
Frequency
accuracy
1 ppm 100 ppb 16 ppb
Jitter & Wander
output
G.823/4 Traffic G.823/4 Traffic G.823/4 Sync*
G.8261 (section 9)
Packaged Plastic / Hardened Plastic Metal
(Not hardened)
End user price US$ 2400 US$ 2800 US$ 3500

*
T
o

a
c
h
i
e
v
e

s
y
n
c
h
r
o
n
i
z
a
t
i
o
n

i
n
t
e
r
f
a
c
e

a
d
e
q
u
a
t
e

t
r
a
f
f
i
c

e
n
g
i
n
e
e
r
i
n
g

i
s

r
e
q
u
i
r
e
d
.

19/21
IPmux-14 Selection Guide


G.823 Traffic G.8261 G.8261
With 16 ppb
G.823 Sync.
with better
than 16 ppb
Suboptimal IPmux-14/T IPmux-14/A IPmux-14/A None.
Well-engineered IPmux-14 IPmux-14/A IPmux-14/A IPmux-14/A
only with
adequate
QoS
Point to Point
Fiber
IPmux-14 IPmux-14/T IPmux-14/A IPmux-14/A
Selection IPmux-14 according to service requirement and PSN type
20/21
PSN Classifications
Sub-optimal network: Choose IPmux-14/T or IPmux-14/A
Limited QoS employed, no priority for TDM services
L3 network (routers)
L2/L3 oversubscribed
Wireless
Well-engineered network: Choose IPmux-14
Strict QoS employed with priority for TDM services
L2/2.5 network with less than 10 switches
GEPON/GPON network
No over subscription on network
QoS/Traffic engineering, priority for TDM service
Point-to-Point Fiber

Note: PSN classification are illustrative, specific testing or exact
knowledge of network behavior required.




21/21
New-Feature Support Matrix
Feature IPmux-
1E
V4.05
IPmux-11
V2.0
IPmux-14
V2.0
IPmux-
8/16 V6.0
Gmux-
2000 V2.0
TDMoMPLS
No Yes Yes No Yes
HDLCoPSN
No No Yes No Yes
System
clock
No Yes Yes No Yes
Trail
extension
No Yes Yes No Yes
Remote
Loopback T1
No Yes Yes Y
*partial for C.T3
Y
G.823 sync.
interface
No No Yes No No
22/21
Summary

IPmux-14 V2.0, a complete pseudo-wire solution:
Serial interface and HDLCoPSN opens new markets with
additional supported legacy services over a packet
network.
MPLSoPSN saves overhead for bandwidth sensitive
applications.
Improvement for clock resiliency and diagnostics
IPmux-14 new timing options to meet tougher PSN
conditions and stringent TDM synchronization
requirements.

You might also like