Scribd
Upload
243 views9 pages

Optical Time Domain Reflectometer: Presented by - Payal Prasad - Priya Sinha

An optical time-domain reflectometer (OTDR) is a single-ended measurement tool that sends a high-power pulse of light down an optical fiber and measures the light reflected back to provide a detailed picture of section-by-section loss and characterize events in the fiber link. It works by using the time it takes for individual reflections to return to determine the distance of each event such as connectors, splices, bends, and faults. An OTDR operates based on the principles of Rayleigh scattering and Fresnel reflection, where Rayleigh scattering causes small amounts of light to scatter in all directions within the fiber and Fresnel reflections occur at connections or breaks where there is an abrupt change in the fiber's

Uploaded by

payalprasad1993
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
243 views9 pages

Optical Time Domain Reflectometer: Presented by - Payal Prasad - Priya Sinha

An optical time-domain reflectometer (OTDR) is a single-ended measurement tool that sends a high-power pulse of light down an optical fiber and measures the light reflected back to provide a detailed picture of section-by-section loss and characterize events in the fiber link. It works by using the time it takes for individual reflections to return to determine the distance of each event such as connectors, splices, bends, and faults. An OTDR operates based on the principles of Rayleigh scattering and Fresnel reflection, where Rayleigh scattering causes small amounts of light to scatter in all directions within the fiber and Fresnel reflections occur at connections or breaks where there is an abrupt change in the fiber's

Uploaded by

payalprasad1993
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 9

1

OTDR

Optical Time Domain
Reflectometer
PRESENTED BY-
PAYAL PRASAD
PRIYA SINHA
2

What is an optical time-domain reflectometer
(OTDR)?

Single-ended measurement tool
Provides a detailed picture of section-by-section loss
Operates by sending a high-power pulse of light down the fiber and
measuring the light reflected back
Uses the time it takes for individual reflections to return to determine
the distance of each event
Measures/characterizes:
Fiber attenuation
Attenuation example (new G.652.C fibers)
0.33 dB/km at 1310 nm (0.35 dB/km for worst case)
0.21 dB/km at 1490 nm (0.27 dB/km for worst case)
0.19 dB/km at 1550 nm (0.25 dB/km for worst case)

3
Measures/characterizes:

Reflection and optical loss caused by every
event in the link
Connectors
Splices
Fiber ends
Detectable faults
Misalignments and mismatches
Dirt on connector ferrules
Fiber breaks
Macrobends

4

OTDR
5
OTDR Basic Principles
An OTDR sends short pulses of light into a fiber. Light
scattering occurs in the fiber due to discontinuities such as
connectors, splices, bends, and faults. An OTDR then
detects and analyzes the backscattered signals. The signal
strength is measured for specific intervals of time and is used
to characterize events.
The OTDR to calculate distances as follows:
Distance = c/n * t/2
c = speed of light in a vacuum (2.998 x 10
8
m/s)
t = time delay from the launch of the pulse to the reception
of the pulse
n = index of refraction of the fiber under test (as specified by
the manufacturer)
6
BLOCK DIAGRAM
7
An OTDR uses the effects of Rayleigh scattering and Fresnel reflection
to measure the fiber's condition, but the Fresnel reflection is tens of
thousands of times greater in power level than the backscatter.


Rayleigh scattering occurs when a pulse travels down the fiber and
small variations in the material, such as variations and discontinuities
in the index of refraction, cause light to be scattered in all directions.
However, the phenomenon of small amounts of light being reflected
directly back toward the transmitter is called backscattering.


Fresnel reflections occur when the light traveling down the fiber
encounters abrupt changes in material density that may occur at
connections or breaks where an air gap exists. A very large quantity of
light is reflected, as compared with the Rayleigh scattering. The
strength of the reflection depends on the degree of change in the index
of refraction.
PHENOMENA INVOLVED
8
Simplified OTDR trace
9
THANK YOU

You might also like