Scribd
Upload
33 views

Introduction To Designmodeler and CFX: By: Ephraim Sparrow, John Abraham, Jimmy Tong, Sandra Sparr

ANSYS CFX is a fully integrated CFD program which allows a user to construct and solve a fluid flow solution. ANSYS DesignModeler is a parametric 3D modeling tool where imported and / or attached CAD geometry can be prepared for simulation. CFX-MESH is a meshing tool which allows the construction of a CFD mesh on three dimensional geometries created in DesignModeler. Each element contains calculation locations where quantities such as velocity, pressure, and

Uploaded by

Frank Torres
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
33 views

Introduction To Designmodeler and CFX: By: Ephraim Sparrow, John Abraham, Jimmy Tong, Sandra Sparr

ANSYS CFX is a fully integrated CFD program which allows a user to construct and solve a fluid flow solution. ANSYS DesignModeler is a parametric 3D modeling tool where imported and / or attached CAD geometry can be prepared for simulation. CFX-MESH is a meshing tool which allows the construction of a CFD mesh on three dimensional geometries created in DesignModeler. Each element contains calculation locations where quantities such as velocity, pressure, and

Uploaded by

Frank Torres
Copyright
© © All Rights Reserved
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 10

Introduction to DesignModeler and CFX

By: Ephraim Sparrow, John Abraham, Jimmy Tong, Sandra Sparr

2005 ANSYS, Inc.

ANSYS, Inc. Proprietary

Presentation Agenda
Brief background on computational fluid dynamics (CFD) Introduction to the ANSYS software suite A series of step-by-step tutorials to guide you through ANSYS DesignModeler and ANSYS CFX

2006 ANSYS, Inc.

CFD Background
Computational fluid dynamics involves the simulation of fluid flow and heat transfer. The method requires the subdivision of a flowing fluid region into a series of elements (control volumes)

2006 ANSYS, Inc.

CFD Background
Each element contains calculation locations where quantities such as velocity, pressure, and temperature are determined. The collection of the calculations provide a description of the entire flow field.

2006 ANSYS, Inc.

CFD Background
Control volumes used to subdivide a three-dimensional rectangular solid. Creating the mesh is critical for the attainment of accurate solutions. It is often impossible to extract meaningful results from a poor mesh.

2006 ANSYS, Inc.

CFD Background
Another critical step in a CFD analysis is the creation of boundary conditions. Boundary conditions describe characteristics of the fluid flow at the boundary of the solution domain.

The boundary regions, shown in green, completely encompass the fluid.

2006 ANSYS, Inc.

Software Overview
The ANSYS software has the capability of solving structural, thermal, E-M, and fluid problems. Within ANSYS Workbench, CFX is utilized to carry out fluid flow solutions.

2006 ANSYS, Inc.

Software Overview
WORKBENCH: A working environment that enables the development, preparation and management of CAE information for finite element analyses as simple as linear, static simulations or as complex as nonlinear, transient, dynamic simulations for structural, mechanical, electrical, electromagnetic, thermal, fluid and biomedical applications. The following tools are contained within ANSYS Workbench: DESIGNMODELER: A feature-based parametric 2D sketching and 3D modeling tool in Workbench where imported and/or attached CAD geometry can be prepared for simulation. CFX-MESH: A meshing tool which allows the construction of a CFD mesh on three dimensional geometries created in DesignModeler. The resulting mesh file is imported into CFX for analysis. CFX: A fully integrated CFD program which allows a user to construct and solve a fluid flow problem and analyze the results.

ANSYS ICEM CFD: From CAD to mesh generation for analysis, ANSYS ICEM CFD provides sophisticated geometry acquisition, mesh generation, post-processing, and mesh optimization tools. The ICEM mesh generation tools can parametrically create grids in multiple formats, including hexahedral, tetrahedral, hybrid, and Cartesian meshes. ICEM CFD is an alternative to the mesh generation capability of CFX-Mesh. ICEM CFD will not be featured in the present tutorial.
2006 ANSYS, Inc. 8

Software Overview - DesignModeler


Within each of the featured programs that are contained within the ANSYS Workbench suite, generic algorithms may be followed for most numerical simulations. For CFX-Mesh and CFX, those algorithms are shown in the following: CFX-Mesh Algorithm: Step 1: Import the solid model from ANSYS DesignModeler Step 2: Create the regions which are related to the physical boundary conditions Step 3: Specify the characteristics of the mesh (element size and layout) Step 4: Create the surface mesh Step 5: Create the volume mesh

2006 ANSYS, Inc.

Software Overview - CFX


CFX Algorithm: I. Preprocessor (CFX-Pre): Step 1: Import the mesh from CFX-Mesh Step 2: Select the fluid type from the CFX database or assign the physical properties of a fluid Step 3: Specify the region of fluid flow, the physical model and the boundary conditions Step 4: Initialize the solution Step 5: Provide information relating to the numerical solution procedure Step 6: Export the files required for simulation to CFX-Solve II. Solver (CFX-Solve): Step 1: Carry out the numerical solution until convergence is achieved III. Postprocessor (CFX-Post): Step 1: View and analyze the results

2006 ANSYS, Inc.

10

You might also like