Scribd
Upload
62 views

Soft - Pptxsoftcomputing - Genetic Algorithm - Introduction

This document summarizes the use of a genetic algorithm to tune the parameters of a PID controller. It begins with an introduction to PID control and soft computing techniques like genetic algorithms. It then explains genetic algorithms, their objective functions, and how they were used to minimize performance indices and tune the PID controller for an industrial control system. The results showed that genetic algorithm tuning produced faster rise times, lower overshoot, and better settling times compared to conventional Z-N tuning methods.

Uploaded by

डॉ. पुष्कर प्रकाश आर्य
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
62 views

Soft - Pptxsoftcomputing - Genetic Algorithm - Introduction

This document summarizes the use of a genetic algorithm to tune the parameters of a PID controller. It begins with an introduction to PID control and soft computing techniques like genetic algorithms. It then explains genetic algorithms, their objective functions, and how they were used to minimize performance indices and tune the PID controller for an industrial control system. The results showed that genetic algorithm tuning produced faster rise times, lower overshoot, and better settling times compared to conventional Z-N tuning methods.

Uploaded by

डॉ. पुष्कर प्रकाश आर्य
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
You are on page 1/ 11

GENECTIC ALGORITHM

Presented By Mr. E Limhachan kikon M-Tech Nit silchar

CONTENTS:
Introduction PID control based on soft computing Genetic algorithm Objectives function of Genetic Algorithm conclusion

INTRO:
Proportional-integral-derivative (PID) control schemes continue to provide the simplest and yet effective solutions to most of the control engineering applications today. Since it is ease to design and simplicity in structure these are frequently used in the heavy industries. Soft computing techniques like Genetic Algorithm(GA) method have proved their excellence in giving better results by improving the steady state characteristics and performance indices.

PID CONTROL:
PID controller is a generic control loop feedback mechanism widely used in industrial control systems. It calculates an error value as the difference between measured process variable and a desired set-point. The PID controller calculation involves three separate parameters proportional, integral and derivative values. The new proportional gain (Kp), the integral time (Tj), and derivative time (Td) were determined from GA. This soft computing techniques for a PID controller considerably reduced the overshoot

GENETIC ALGORITHM:

o Genetic Algorithms (GA) are a stochastic global search method that mimics the process of natural evolution. It is one of the methods used for optimization. o The genetic algorithm starts with no knowledge of the correct solution and depends entirely on responses from its environment and evolution operators such as reproduction, crossover and mutation to arrive at the best solution

OBJECTIVE FUNCTIONS OF GENETIC ALGORITHM:


This is the most challenging part of creating a genetic algorithm is writing the objective function. Here the objective function is required to evaluate the best PID controller for the system. An objective function could be created to find a PID controller that gives the smallest overshoot, fastest rise time or quickest settling time. However in order to combine all of these objectives it was decided to design an objective function that will minimize the performance indices of the controlled system instead. Each chromosome in the population is passed into the objective function one at a time. The chromosome is then evaluated and assigned a number to represent its fitness, the bigger its number the better its fitness. The genetic algorithm uses the chromosomes fitness value to create a new population consisting of the fittest members.

CONTD:
When the chromosome enters the evaluation function, it is split up into its three Terms. The newly formed PID controller is placed in a unity feedback loop with the system transfer function. This will result in a reduce of the compilation time of the program. The system transfer function is imported as a global variable.

The controlled system is then given a step input and the error is assessed using an error performance criterion such as Integral square error or in short ISE. The chromosome is assigned an overall fitness value according to the magnitude of the error, the smaller the error the larger the fitness

Result:

CHARACTERISTICS

Z-N TUNINGS

GA

SETTLING TIME (SEC)

4.8

0.00315

RISE TIME (SEC)


OVERSHOOT (%)

0.34
45.3

0.00257
0.0365

INITIALIZED POPULATION

EVALUATE FITNESS

SELECT FITNESS

MUTATION

CROSSOVER /PRODUCTION NON OPTIMUM SOUTION OPTIMUM SOLUTION


FLOWCHART OF GA

CONCLUSIONS:
Simulation results demonstrate the tuning methods that have a better control performance compared with the conventional ones. PID controller tuning is a small scale problem and thus computational complexity is not really an issue here since soft computing is often criticized for two reasons: algorithms are computationally heavy and convergence to the optimal solution cannot be guaranteed. Compared to the conventional tuned system, GA tuned system has a good steady state response and performance indices.

Thank you!

You might also like