Scribd
Upload
365 views

Fault Tree Analysis

Fault tree analysis (FTA) is a risk assessment tool that graphically models how potential failures in a system can combine to cause undesirable events. It assumes a failure of functionality and identifies all potential root causes. FTA represents results pictorially in a tree structure using logical operators to describe how fault modes at each level could combine to cause higher level events. It can be used to establish pathways to root causes, investigate complaints or deviations, and evaluate how multiple factors affect an issue.

Uploaded by

dr_hsn57
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
365 views

Fault Tree Analysis

Fault tree analysis (FTA) is a risk assessment tool that graphically models how potential failures in a system can combine to cause undesirable events. It assumes a failure of functionality and identifies all potential root causes. FTA represents results pictorially in a tree structure using logical operators to describe how fault modes at each level could combine to cause higher level events. It can be used to establish pathways to root causes, investigate complaints or deviations, and evaluate how multiple factors affect an issue.

Uploaded by

dr_hsn57
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 11

Annex I: Methods & Tools

ICH Q9 QUALITY RISK MANAGEMENT

Annex I.4

Fault Tree Analysis (FTA)

prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

July 2006, slide 1

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT

I.4: Fault Tree Analysis (FTA)


(IEC 61025)

Assumes failure of the functionality of a product or process


Identifies all potential root causes of an assumed failure or problem that it is thought to be important to prevent Evaluates system (or sub-system) failures one at a time Can combine multiple causes by identifying causal chains

ICH Q9
prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

July 2006, slide 2

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT

I.4: Fault Tree Analysis (FTA)


How to perform? Results are represented pictorially in the form of a tree of fault modes At each level in the tree, combinations of fault modes are described with logical operators (AND, OR, etc.) ICH Q9

http://www.sverdrup.com/safety/fta.pdf
prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

July 2006, slide 3

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT EXAMPLE

I.4: Fault Tree Analysis (FTA)


Basic symbols: Basic Flow FAULT Fault in a box indicates that it is a result of previous faults Connects preceding fault with a subsequent fault that could cause a failure

OR

AND

Connects two or more faults that must occur simultaneously to cause the preceding fault
Source: Overview of Risk Management Techniques. Robert C. Menson, PhD (2004).
July 2006, slide 4

prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT EXAMPLE

I.4: Fault Tree Analysis (FTA)


Basic symbols: End Points & Connector
Root cause

Root cause (= basic fault)


(e.g. part failure, software error, human error)

Fault to be further analyzed with more time or information if needed

Transfer-in and transfer-out events


Source: Overview of Risk Management Techniques. Robert C. Menson, PhD (2004).
prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

July 2006, slide 5

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT EXAMPLE

I.4: Fault Tree Analysis (FTA)


Additional Symbols Exclusive OR Gate: Fault occurs if only one of the input faults occurs Priority AND Gate: Fault occurs if all inputs occur in a certain order m

Voting OR Gate: Fault occurs if m or more out of n input faults occurs


Source: Overview of Risk Management Techniques. Robert C. Menson, PhD (2004).
July 2006, slide 6

prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT

I.4: Fault Tree Analysis (FTA)


Potential Areas of Use(s) Establish the pathway to the root cause of the failure

While investigating complaints or deviations to fully understand their root cause


Ensure that intended improvements will fully resolve the issue and not lead to other issues Evaluating how multiple factors affect a given issue
ICH Q9
prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

July 2006, slide 7

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT EXAMPLE

I.4: Fault Tree Analysis (FTA)


Investigation of laboratory failures

Production

outlier

Calibration

Out of specification result

or

Lab error

or

systematic

or

Interfaces

others

random

other

prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

July 2006, slide 8

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT EXAMPLE

I.4: Fault Tree Analysis (FTA)


Hard to open or

Production

Cap

Bottle

Stability and

or

Bad fit

Formulation

Processing

Packaging

Solidify

Ageing

or
Supply Defect Too tightly Closed

Change closing torque and calibrate periodically


Takayoshi Matsumura, Eisai Co
July 2006, slide 9

prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT

I.4: Fault Tree Analysis (FTA)


Experiences Better as a retrospective tool Visually focused: aid for showing linkages

Limitations
> > > > > > Only as good as input Time and resource consuming (needs FMEA as a complement ) Need skilled leader to focus on what is really important Need significant amount of information Human errors may be difficult to predict Many potential fault trees for a system - Some more useful than others - Need to evaluate contribution
July 2006, slide 10

prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

Annex I: Methods & Tools


ICH Q9 QUALITY RISK MANAGEMENT EXAMPLE

I.2: Failure Mode Effects Analysis (FMEA) I.4: Fault Tree Analysis (FTA)
FTA
Assumes failure of the functionality of a product FMEA Assumes component failure

Identifies the root cause Identifies functional failure as a result of component of functional failure failure Top down Bottom up

prepared by some members of the ICH Q9 EWG for example only; not an official policy/guidance

July 2006, slide 11

You might also like