Naveen Patel

Console Connectivity

RJ-45 Connector Console Port

Rollover Cable

RJ-45 to DB-9 Converter

Computer

Naveen Patel

Console Connectivity

Connect a rollover cable to the router console port (RJ-45 connector). Connect the other end of the rollover cable to the RJ-45 to DB-9 converter Attach the female DB-9 converter to a PC Serial Port. Open emulation software on the PC.

Naveen Patel

Emulation Software

WINDOWS Start Programs Accessories Communications HyperTerminal HyperTerminal. Give the Connection Name & Select Any Icon

Select Serial (Com) Port where Router is Connected.

In Port Settings Click on Restore Defaults

LINUX # minicom -s

Naveen Patel

Console Connectivity

Con 0

HYD
E0

LAN - 192.168.1.0/24

Naveen Patel

Naveen Patel

Naveen Patel

Naveen Patel

Naveen Patel

Naveen Patel

Naveen Patel

Naveen Patel

abc

Naveen Patel

Naveen Patel

Naveen Patel

Naveen Patel

Naveen Patel

Naveen Patel

System Bootstrap, Version 11.0(10c), SOFTWARE Copyright (c) 1986-1996 by cisco Systems 2500 processor with 2048 Kbytes of main memory Notice: NVRAM invalid, possibly due to write erase. F3: 5575260+78596+410108 at 0x3000060

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. Cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706

Naveen Patel

Cisco Internetwork Operating System Software

IOS(tm) 2500 Software(C2500-P-L),Version 12.1(24),RELEASE SOFTWARE(fc1

Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Mon 30-Sep-02 20:43 by srani Image text-base: 0x0302EA54, data-base: 0x00001000
Cisco 2500(68030)processor(revision N) with 2048K/2048K bytes of memory

Processor board ID 11169613, with hardware revision 00000001 X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read ONLY) --- System Configuration Dialog --Would you like to enter the initial configuration dialog? [yes/no]: n

Naveen Patel

Press RETURN to get started! 00:00:20: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up 00:00:20: %LINK-3-UPDOWN: Interface Serial0, changed state to down 00:00:20: %LINK-3-UPDOWN: Interface Serial1, changed state to down 00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to up 00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down 00:00:21: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down 00:12:43: %LINK-5-CHANGED: Interface Ethernet0, changed state to administratively down 00:12:43: %LINK-5-CHANGED: Interface Serial0, changed state to administratively down 00:12:43: %LINK-5-CHANGED: Interface Serial1, changed state to administratively down 00:12:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to down 00:12:46: %SYS-5-RESTART: System restarted

Naveen Patel

Cisco Internetwork Operating System Software

IOS(tm) 2500 Software(C2500-P-L),Version 12.1(24),RELEASE SOFTWARE(fc1

Copyright (c) 1986-2002 by cisco Systems, Inc. Compiled Mon 30-Sep-02 20:43 by srani User Mode Router> enable Privileged Mode Router# show running-config
Building configuration ..... Current configuration: ! version 12.1 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname Router

!
interface Ethernet0 no ip address shutdown --More--

Naveen Patel

interface Serial0 no ip address shutdown ! interface Serial1 no ip address shutdown ! no ip classless ! ! line con 0 line aux 0 line vty 0 4 login ! end

Router# show startup-config

% Non-volatile configuration memory has not been set up or bad checksum

Router#

Naveen Patel

Router# show flash

System flash directory: File Length Name/status 1 8108960 /c2500-ipx-ip.bin [8109024 bytes used, 8668192 available, 16777216 total] 16384K bytes of processor board System flash (Read ONLY)

Router# show version

Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-JS-L),Version 12.1(17),RELEASE SOFTWARE Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Mon 04-Jan-99 17:27 by ashah Image text-base: 0x03040148, data-base: 0x00001000 ROM: System Bootstrap, Version 11.0(10c), SOFTWARE BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFTWARE (fc1) --More--

Naveen Patel

Router uptime is 1 hour, 28 minutes System restarted by power-on System image file is "flash:/c2500-ipx-ip.bin", booted via flash Cisco 2500(68030)processor(revision N) with 2048K/2048K bytes of memo Processor board ID 11169613, with hardware revision 00000001 X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 1 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 16384K bytes of processor board System flash (Read ONLY) Configuration register isGlobal 0x2102 Configuration Mode

Router# configure terminal Enter configuration commands, one per line. Router(config)# hostname Hyderabad Hyderabad(config)#

End with CNTL/Z.

Naveen Patel

Hyderabad(config)# interface ethernet 0 Hyderabad(config-if)# ip address 192.168.1.1 255.255.255.0 Hyderabad(config-if)# no shutdown Configuring Ethernet interface Hyderabad(config-if)# exit line vty 0 4 Hyderabad(config)# Router(config)# interface ethernet <no.> login Hyderabad(config-line)# Router(config-if)# ip address <address><mask> Hyderabad(config-line)# password zoom Router(config-if)# no Telnet shutdown password exitSetting Hyderabad(config-line)#

line con 0 line vty 0 4 Hyderabad(config)# Router(config)# login Hyderabad(config-line)# Router(config-line)# login Hyderabad(config-line)# password ccna Router(config-line)# password <password> Setting the Console Enable password exit Hyderabad(config-line)# Setting password Router(config)#enable password <password> line aux 0 line con Hyderabad(config)# Router(config)# 0 login Hyderabad(config-line)# Router(config)#enable Router(config-line)# secret login <password> Hyderabad(config-line)# password cisco Router(config-line)# password <password> Hyderabad(config-line)# exit Setting Auxilary password enable password cisco Hyderabad(config)# Router(config)# line aux 0 Hyderabad(config)# enable secret zoom Router(config-line)# login ^Z Hyderabad(config)# Router(config-line)# password <password> Naveen Patel

Hyderabad# show running-config

Building configuration ..... Current configuration: ! version 12.1 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname Hyderabad ! enable secret 5 $1$60nw$8XzAJ445GBzx1mgYJTUjo1 enable password cisco ! interface Ethernet0 ip address 192.168.1.1 255.255.255.0 ! interface Serial0 no ip address shutdown --More--

Naveen Patel

interface Serial1 no ip address shutdown ! no ip classless ! line con 0 login password ccna line aux 0 login password cisco line vty 0 4 login password zoom ! end

Hyderabad# show startup-config

% Non-volatile configuration memory has not been set up or bad checksum

Hyderabad#

Naveen Patel

Hyderabad# copy running-config startup-config Building configuration ..... [OK]

Hyderabad# show startup-config Saving Router Configuration Building configuration ..... Router#copy running-config startup-config
Current configuration: ! version 12.1 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname Hyderabad ! enable secret 5 $1$60nw$8XzAJ445GBzx1mgYJTUjo1 enable password cisco ! interface Ethernet0 ip address 192.168.1.1 255.255.255.0 --More--

Naveen Patel

interface Serial0 no ip address shutdown ! interface Serial1 no ip address shutdown ! no ip classless ! line con 0 login password ccna line aux 0 login password cisco line vty 0 4 login password zoom ! end

Hyderabad#

Naveen Patel

Console Connectivity

Con 0

HYD
E0

LAN - 192.168.1.0/24

Naveen Patel

================================ Welcome to Hyderabad Router ================================ User Access Verification password : **** Hyderabad> enable password : **** Hyderabad#

Naveen Patel

Microsoft Windows 2000 [Version 5.00.2195] (C) Copyright 1985-2000 Microsoft Corp. C:\> telnet 192.168.1.1 Connecting ..... ================================ Welcome to Hyderabad Router ================================ User Access Verification password : **** Hyderabad> enable password : **** Hyderabad#

Naveen Patel