Xilinx FPGAs:Evolution and Revolution

Evolution results in bigger, faster, cheaper FPGAs; better software with fewer bugs, faster compile times; coupled with better technical support.

Innovative architectural and circuit features with advancements in design methodology - modular team based design & internet based configuration method: resulting in Revolution.

A Decade of Progress

Xilinx FPGAs : An Endless Journey

1.5K

7.5K, 50MHz

XC3000

XC3100

85K, 80 MHz

16K, 50MHz

XC5200 0.5 micron

XC4000 0.5 micron

SPARTAN 0.35, 0.25 m

100MHz+ 40K

50K-1M, 200MHz

VIRTEX 0.22micron

SPARTAN-II 0.22 micron

200K, 200MHz

4M, 250MHz

VIRTEX-E 0.18micron

SPARTAN-IIE 0.18micron

300K, 200MHz+

40K-8M, 420MHz

VIRTEX-II 0.15 micron

10M, 420MHz

VIRTEX-II PRO 0.13micron

Xilinx FPGAs - Generic Features

High Performance at different voltages Footprint Compatibility - Devices within each family are compatible. Low power consumption/high performance Integrated Software Technology independence - EDIF, VHDL, Verilog, SDF interfaces.

XC2000

First FPGA Family from Xilinx. Two members: XC2064 1000 Gates XC2018 1500 Gates Ext. Crystal Oscillator. No Tri State Buffers. XACT 1.0 Development System.

XC2000

Max.Logic Gates Max. CLB Flip-flop Max. I/O Pins Max. I/O Flip-Flop

1500 100 74 74

XC3000

Replaces TTL, MSI and other PLD logics. Integrates complete subsystem into single Package. System clock Speed up to 50 MHz. On-chip crystal Oscillator. Low-Skew Clock Nets. Over 20 different Packaging Options Interface to popular design Environment like Mentor, Cadence and View Logic.

XC3000 CLB

XC3100A

Ultra-high-speed Family with six members. XC3195 in 22 X 22 CLB array size. Compatible with XC3000. Error checking of configuration bit stream.

XC4000 CLB

XC4000 Family Features

Synchronous Single and Dual-Port RAM Internal Three-state buffers. JTAG Boundary Scan System performance to 80 MHz 0.5 SRAM Process Technology

XC4000 Sub-Families
Version Max. logic Gates Max. I/O Voltage

XC4000XL 3k-85k XC4000EX 28k, 36k XC4000E 3.0-25k

448 320 256

3.3 5 5

XC5200

Low Cost FPGA Family. System Features: - Fast Arithmetic Functions - High Performance Clock Network - Highly routable - Easy Pin Locking - Fast wide Functions - Three-state buffers - JTAG - Performance up to 50 MHz.

Resource Comparison

Xilinx Spartan/XL FPGAs

100 MHz+ performance On-chip SelectRAM Software v4.2i Core solutions

Small die size

Total Cost Management

Low cost packaging Low test cost

Total Cost Management

Leading edge process technology Smallest die size of any FPGA with on-chip RAM Focused package offering Low-power architecture allows use of highest volume plastic packages Streamlined test flow Lower cost test hardware Built-in self test features and shorter test times Optimized manufacturing flows

Spartan-XL Family Advanced 0.35m Process

Transistor gates 0.35u Allows 3.3 V supply

All other features 0.25u Small size

Low capacitance Performance

Chip

Combines 3.3 V operation with 0.25u benefits

Spartan Speed Grades

Higher speed grade = higher performance

-3

-4
XC5200 XC4000E Spartan Spartan-XL

Whats missing in Spartan?

No asynchronous RAM Only RAM16(32)X1S, RAM16X1D, ROM16X1 No edge decoders No DECODEx No wired-AND No WANDx or WOR2AND Mode pins not usable as I/O No MD0, MD1, MD2

Virtex - features

Densities from 50 K to 1M system gates. System performance up to 200 MHz. Multi-standard Select IO interfaces. Built-in clock-management circuitry - Four DLLs - Four Low-skew global Clock Distribution Net Hierarchical Memory System. Dedicated Multiplier Support.

Spartan-II - features

Densities as high as 200K gates. Streamlined features based on Virtex architecture. Very Low Cost LUT Distributed RAM and Block RAM support. Dedicated Multiplier support. 4 DLLs

Virtex/Spartan-II CLB

1 CLB holds 2 slices Each slice has two sets of

Four-input LUT

Any 4-input logic function Or 16-bit x 1 RAM Or 16-bit shift register

Carry & Control

Fast arithmetic logic Multiplier logic Multiplexer logic Latch or flip-flop Set and reset True or inverted inputs Sync. or Async. Control

Storage element

Virtex/Spartan-II DLLs Improve Clock Networks

DLL2
Cascade DLLs

Deskew Clocks on Board

DLL3
Generate Clocks (Multiply, Divide, or Shift)

DLL4

Convert Clock Levels using Select I/O

Delay locked loops synchronize on-chip and board level clocks

Virtex-E whats added?

Up to 4 million system gates 2-4X more Block RAM 8 DLLs Differential I/O signaling (LVDS/BLVDS) some new speed grades.

Spartan-IIE - features

Density 50-300K Supports LVDS 4 DLLs VCCINT 1.8V More speed grades than Spartan-II. Less packaging Options.

Virtex-II

All Xilinx FPGAs contain the same basic resources CLBs contain combinatorial logic and register resources IOBs interface between the FPGA and the outside world Programmable interconnect Other resources Three-state buffers Global clock buffers Boundary scan logic Virtex-II devices contain additional resources Block SelectRAM Dedicated Multipliers

Digital Clock Manager (DCM)

CLB Tile
TBUF TBUF

COUT

COUT

Slice S3

Slice S2 Switch Matrix SHIFT

Slice S1

Slice S0

Fast Connects

CIN

CIN

Slice Structure
Slice 0 LUT Carry
PRE D Q CE CLR

LUT

Carry

PRE D Q CE CLR

Mult-AND and dedicated Multiplier too SRL16 DDR Registers. Fast Carry Logic Digitally Controlled Impedance

Connecting Function Generator

CLB

Slice S1

Slice S0

Select I/O

Allows direct connections to external signals of varied voltages and thresholds Optimizes the speed/noise tradeoff Saves having to place interface components onto your board Differential signaling standards LVDS, BLVDS, ULVDS LDT

Distributed and Block Select RAM

Slice LUT

RAM32X1S D WE WCLK A0 O A1 A2 A3 A4

RAM16X1D D WE WCLK A0 SPO A1 A2 A3 DPRA0 DPO DPRA1 DPRA2 DPRA3

LUT

Dedicated Multiplier Block

Eighteen-bit 2s complement signed operation Optimized to implement Multiply / Accumulate functions Multipliers are physically located next to block SelectRAM

4x4 signed

~255 MHz ~210 MHz

18 x 18 Multiplier

Output (36 bits)

8x8 signed

12x12 signed ~170 MHz 18x18 signed ~140 MHz

DCM

Up to twelve DCMs per device Located on top and bottom edges of the die Driven by clock input pads DCMs provide: Delay-Locked Loop (DLL) Digital Frequency Synthesizer (DFS) Digital Phase Shifter (DPS) Digital Spread Spectrum (DSS) Up to four outputs of each DCM can drive onto global clock buffers All DCM outputs can drive general routing

Challenges to accelerate Processing performance

Multiple Tasks

Multiple Solutions Parallel Processing Using Multiple Processors Parallel Processing in Hardware Multiple Processors on Multiple Tasks

High performance lower cost low complexity

Specific task focus Scalable

Virtex-II Pro Addresses All Processing Tasks

Uunmatched Performance Uunmatched Flexibility

Virtex-II Virtex-II Pro Fabric Pro Fabric

Logic Capacity and Features

Virtex II Pro Leads all the way

Supply Voltage

XC4000 and Spartan families use a 5V supply. The-XL families use 3.3 V supply. Virtex and Spartan-II use 2.5V supply. Virtex-E uses 1.8 V. Virtex-II and Virtex-IIPro uses 1.5 V

Xilinx Development System

Xilinx-NeoCAD Merge

M 1.0

M2.0i....M5.1i

THE FUTURE.

In 2005, FPGAs will be built on 70nm-Cu process; will implement 50 million system gates; with 2 billion transistors on-chip; with 10 layers of copper metal; with embedded processors running at 1 GHz clock rate; with direct interface to 10 Gbps serial data.

URLs

www.xilinx.com www.fpga-faq.com www.optimagic.com www.datasheetlocator.com Newsgroup comp.arch.fpga