Scribd
Upload
202 views16 pages

Timber Framed Structures Final

Timber framed structures differ from traditional masonry constructions by using wood for the structural frame members. The frames are assembled off-site and then erected, allowing for rapid construction. They provide better insulation and require less energy to reach a comfortable temperature than masonry alternatives. The most common construction method is platform framing, where each floor level is framed separately to serve as a working platform. External walls are framed with lightweight softwood studs spaced at regular intervals and sheathed with bracing materials like plywood.

Uploaded by

mariana_dragomir_2
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
202 views16 pages

Timber Framed Structures Final

Timber framed structures differ from traditional masonry constructions by using wood for the structural frame members. The frames are assembled off-site and then erected, allowing for rapid construction. They provide better insulation and require less energy to reach a comfortable temperature than masonry alternatives. The most common construction method is platform framing, where each floor level is framed separately to serve as a working platform. External walls are framed with lightweight softwood studs spaced at regular intervals and sheathed with bracing materials like plywood.

Uploaded by

mariana_dragomir_2
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 16

Timber Framed Structures

The Structure
Timber framed structures differ from those constructed of traditional brick and block work because the structural frame members are fabricated from wood. They transmit their loads onto the foundation through a common sole or base plate. Timber frame structures must comply with the building regulations in every aspect including resistance to fire. In the UK housing in timber framed structures is permitted up to three storeys including flats and Maisonettes.

Advantages of timber framed construction.


Timber framed construction allows for the use of semi skilled labour for the manufacture in factory controlled conditions. Rapid completion on site is easily achieved with less wet trades involved. The occupier of a timber framed dwelling benefits from the higher insulation which can easily be achieved. The use of low thermal capacity linings absorbs less heat than masonry walls making it is easier to reach the required comfort temperature more quickly.

Manufacturing Process

Timber framed houses are usually made in factories into large wall sized units which make economic use of materials. The manufacturing process is not effected by inclement weather.
Timber framed panels in the workshop ready for erection.

Platform framed structures.

The most common method of constructing a timber framed structure is a platform frame. With this method each storey is framed up as a separate operation making use of each floor as an erection platform. Another method of construction is balloon frame. In this method of construction the building is fabricated from wall sections two storeys high. It is not used for three storey structures.

External walls
The structural framed members of the external walls are constructed with light softwood timbers which are designed using stress graded timber to BS4978. The studs are usually processed from basic sawn sizes of either 100 x 50mm or 75 x 50mm. These studs are usually spaced at 400mm centres. The studs are nailed with simple butt joints to top and bottom plates of the same size. Panel sizes is dictated by an early decision on whether they are to be craned or manually lifted into position. The external walls are braced with sheet materials, usually water boil proof (WBP) plywood, nailed or stapled to the external face of the frame.

Drawing of an external walls

Timber Stud Walls

Trussed Rafter

Trussed Rafters are used on most timber framed houses.

Timber Framed structures under erection

Breather Membrane

To prevent moisture entering into the plywood sheathing during construction a breathable membrane is stapled onto the plywood on the external face. This membrane also provides a second line of defence should moisture penetrate the exterior cladding.

External Cladding
External cladding can be chosen from a wide range of materials which include brickwork secured across a cavity to the timber frame with flexible metal ties. The flexible wall ties are used to allow for differential movement between the brick cladding and the timber frame. The brick cladding must be designed in such a way to allow for movement at projecting windows sills and under roof structures.

External Cladding
A B C D E F Inner Lining of Plasterboard Vapour Check Structural Timber Frame Thick Insulation Quilt-CFC free Sheathing Board Waterproof Breather Membrane

G
H I

Stainless Steel Wall Tie


Clear 50mm Wall Cavity Brick Outer Cladding

External Cladding

Roofing tiles may also be used as a cladding material. These tiles are hung on timber battens which have been secured to the plywood. These battens must be treated with a timber preservative prior to being secured to the plywood.

Preservation Treatment
The Building Regulations require that timber cladding should be made from durable species or treated with suitable preservatives. They also require that all timber which occurs below damp proof course (DPC) level must be treated against insect and fungal attack. Other timbers do not require to be treated with preservatives but most manufacturers do treat all their timbers.

Approval for fire and the structural stability of timber framed houses require a certificate of approval by a structural engineer or another equally approved organisation before erection.

You might also like