Scribd Logo
Upload

Welcome to Scribd!

  • 71 views

    Cooling and Lubrication Systems

    Uploaded by

    Balvinder
    The document summarizes cooling and lubrication systems for engines. It discusses how engines use cooling systems to remove excess heat through fluids like water and air. It describes the properties of common engine construction materials like cast iron and aluminum. It then explains the key components and heat transfer processes for both air cooled and water cooled engine designs. Finally, it provides an overview of engine lubrication systems and oil viscosity standards.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPT, PDF, TXT or read online from Scribd

    Cooling and Lubrication Systems

    Uploaded by

    Balvinder
    71 views14 pages
    The document summarizes cooling and lubrication systems for engines. It discusses how engines use cooling systems to remove excess heat through fluids like water and air. It describes the properties of common engine construction materials like cast iron and aluminum. It then explains the key components and heat transfer processes for both air cooled and water cooled engine designs. Finally, it provides an overview of engine lubrication systems and oil viscosity standards.

    Original Title

    6_CoolingLubrication

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PPT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes cooling and lubrication systems for engines. It discusses how engines use cooling systems to remove excess heat through fluids like water and air. It describes the properties of common engine construction materials like cast iron and aluminum. It then explains the key components and heat transfer processes for both air cooled and water cooled engine designs. Finally, it provides an overview of engine lubrication systems and oil viscosity standards.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    71 views14 pages

    Cooling and Lubrication Systems

    Uploaded by

    Balvinder
    The document summarizes cooling and lubrication systems for engines. It discusses how engines use cooling systems to remove excess heat through fluids like water and air. It describes the properties of common engine construction materials like cast iron and aluminum. It then explains the key components and heat transfer processes for both air cooled and water cooled engine designs. Finally, it provides an overview of engine lubrication systems and oil viscosity standards.

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PPT, PDF, TXT or read online from Scribd
    Download as ppt, pdf, or txt
    of 14

    Cooling and Lubrication Systems

    Chapter 8

    Cooling Systems

    Introduction
    Internal combustion engines use heat to convert the energy of fuel to power. Not all of the fuel energy is converted to power. Excess heat must be removed from the engine. In engines, heat is moved to the atmosphere by fluids-water and air. If excess heat is not removed, engine components fail due to excessive temperature. Engine temperature is not consistent throughout the cycle. Heat moves from areas of high temperature to areas of low temperature.

    Engine Construction
    Engine components are constructed of aluminum and cast iron alloys, steel and non-metallic materials. The physical properties of these alloys determines the physical characteristics of the engine components. Undesirable properties of cast iron:
    Increased weight Propensity for oxidation/corrosion Difficulty machining Relative poor heat conductivity.

    Desirable cast iron properties.


    Greater density Structural integrity when mechanically or thermally stressed. Porous surface--improved lubrication. Graphite enhanced lubrication. Less dimensional changes when heated.

    Engine Construction-cont.
    Desirable properties of cast aluminum:
    1. High strength to weight ratio. 2. Lower production cost 3. Excellent heat dissipation

    Undesirable properties of cast aluminum:


    1. Higher raw material costs 2. Less resistant to wear. 3. Greater thermal expansion

    Aluminum is the material of choice for modern small gas engines.

    Cooling Terms
    Thermal Conductivity
    Ability of a material to conduct and transfer heat

    Three means of heat transfer:


    1. Conduction
    2. Convection 3. Radiation

    Thermal expansion
    Expansion of a material when it is heated.

    Thermal growth
    Increase in size caused by heating. When cooled does not return to normal size.

    Thermal distortion
    Asymmetrical or nonlinear thermal expansion.

    Heat Movement
    Conduction
    Movement of heat through materials.

    Convection
    Movement of heat by fluids.

    Radiation
    Heat movement by transfer from one body to another.

    Two Cooling Systems


    Small engines use two cooling systems;
    Air Liquid

    Both systems have two common features.


    Heat is transferred from the combustion chamber to the crankcase by the oil. A large portion of the excess heat is removed with the exhaust gases.

    The difference is in the medium used to move the heat from the engine to the atmosphere.

    Air Cooled Heat Movement


    In air cooled engines the excess heat in the combustion chamber moves through the cylinder walls by conduction. The heat transfers from the engine parts to the air at the exterior surfaces and into the atmosphere by convection. The air fins increase the surface area between the engine and the air--increasing heat transfer. The heart of the system is the fins on the flywheel which pumps the air around the engine. The air flow is directed by the air shrouds.
    9

    Water Cooled Heat Movement


    Water cooled engines transfer the excess heat from the combustion chamber through the cylinder walls by conduction. Water flowing past the exterior cylinder walls absorbs the heat and transfers it to the radiator. Air flowing through the radiator absorbs the heat and transfers it to the atmosphere. The system relies on a water pump to circulate the water through the system and a fan to move air through the radiator.

    10

    Lubrication System

    11

    Introduction
    The lubrication system provides oil to appropriate areas of the engine to maintain a film of oil to separate bearing surfaces. Oil also transfers combustion heat to the crankcase. An important characteristic of oil is the viscosity. Viscosity is the internal resistance to flow of a fluid. The SAE rates the viscosity of oils. Low viscosity means a high volume of oil flows through a specific orifice at a specified temperature, atmospheric pressure, and time period. Multi-viscosity oils are popular because they offer low viscosity characteristics in low temperatures and high viscosity characteristics with higher temperatures.

    12

    Oil Standards
    Service Categories-Gasoline Engines
    SA, SB, SC, SD, SE, SF, SG, SH are obsolete. SJ: 2001 and older automotive engines. SL: All automotive engines manufactured after July 2001.
    Service Categories--Diesel Engines
    CA, CB, CD, CE are obsolete. CF: Off road, indirect-injected manufactured after 1994 and with fuels over 0.5% sulfur. CF-2: Severe duty, two cycle engines. CF-4: High speed, four cycle engines. CG-4: Severe duty, high speed, four stroke, with fuels less than 0.5% sulfur. CH-4: High speed, four stroke engines designed to meet 1998 exhaust standards. CI-4: High speed, four stroke engines designed to meet 2002 exhaust standards.

    13

    Lubrication Systems
    Small engines use one of three lubrication systems.
    Splash Pressure filtration Pressure

    14

    You might also like