This document provides details for waterproofing and drainage solutions for various building components including flat roofs, gutters, podiums, balconies, terraces, swimming pools, bathrooms, and downpipes. It includes specifications for waterproofing membranes, protective screeds, sealants, and other materials to be used in conjunction with cement/sand mixes for laying slopes to direct water flow. Reinforcement is specified for some waterproofing applications.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online from Scribd
This document provides details for waterproofing and drainage solutions for various building components including flat roofs, gutters, podiums, balconies, terraces, swimming pools, bathrooms, and downpipes. It includes specifications for waterproofing membranes, protective screeds, sealants, and other materials to be used in conjunction with cement/sand mixes for laying slopes to direct water flow. Reinforcement is specified for some waterproofing applications.
This document provides details for waterproofing and drainage solutions for various building components including flat roofs, gutters, podiums, balconies, terraces, swimming pools, bathrooms, and downpipes. It includes specifications for waterproofing membranes, protective screeds, sealants, and other materials to be used in conjunction with cement/sand mixes for laying slopes to direct water flow. Reinforcement is specified for some waterproofing applications.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online from Scribd
This document provides details for waterproofing and drainage solutions for various building components including flat roofs, gutters, podiums, balconies, terraces, swimming pools, bathrooms, and downpipes. It includes specifications for waterproofing membranes, protective screeds, sealants, and other materials to be used in conjunction with cement/sand mixes for laying slopes to direct water flow. Reinforcement is specified for some waterproofing applications.
Copyright:
Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online from Scribd
Download as ppt, pdf, or txt
You are on page 1/ 11
Flat Roof with Vent Pipe
Pipe abraided and primed with Conc.2525 Primer Sonol.Ultra Polyurethane joint sealant
Conipur Tc 458
Fall
RC Roof Slab Conc.2525
Existing Cement::Sand screed laid to fall
Gutter/Parapet wall detail on Flat Roof
3mmx3mm reglet for membrane termination filled with S.Ultra sealant
Conipur terminate 300mm high upturn tucked into reglet
Conideck system
Existing Cement:Sand screed to fall
Mortar fillet made from Conc.2525+filler
Conipur M865Z detailing to downpipe
Discharge Pipe Detail at Podium/Balcony/Terrace
Floor trap cover
FALL Tile finishes by others Levelling screed by others Air-con discharge pipe 20mm thick cement.sand protective screed
FALL
Sonoshield HLM 6000 1:3 cement/sand screed laid to fall
150
R.C. Slab Construction grout-shrinkage compensated grout to fill recess Discharge Pipe 3
Swimming Pool Detail
WATER LEVEL Non slip ceramic tiles and adhesives by others Finemesh reinforcement fixed spindle at 450mm contres glued to concrete with Concresive 1438 Sonoshield HLM 6000 Non-slip ceramic tiles and adhesives by others Sonoshield HLM 6000 on 1:3 cement/sand screed laid to fall Finemesh extended to 500mm on horizontal surface 1:3 cement/sand protective screed Sonoshield HLM 6000 Masterflex 610
POOL DECK LEVEL
Angle fillet constructed from non-shrink mortar
CAR PARK BELOW
500
Gutter Detail at Roof
Protective screed reinforced with finemesh 10mm x 10mm reglet for membrane termination filled with Sonolastic NP1 sealant 50mm thick in-situ 1:3 cement/sand screed reinforced with finemesh, panels of 750mm x 750mm with 10mm wide joint filled with Sonolastic PS2 Polysulphide sealant
For brick wall the brick surface must be plastered to receive Barralastic
For shower area, upturn of 1.8m. For non-shower area 0.15m to prevent back splashing of water
Wall tiles by others
Floor tiles by others Tile bedding by others
Barralastic (2 applications) on 3:1 sand:cement screed laid to fall (optional )
Slab
10mm x 10mm mortar fillet
Bathroom Area with Stud & Frame
Drywall infill fixed to Stud & Frame To be primed with Acryl 60 to receive Barralastic For brick wall the brick surface must be plastered to receive Barralastic
Wall tiles Floor tiles Tile bedding
Barralastic (2 applications) Reinforced with Sonoshield Reinforcement at upturn
Slab
10mm x 10mm mortar fillet
Down Pipe Detail
Barralastic 2 coats
Floor trap cover Fall
Tiles Finishes installed Using Nano-Light
Air-con water discharge pipe
Barralastic 50mm into downpipe
Masterflow 98 non shrink grout to fill box-out opening
Discharge pipe 10
Wet Area Vent Pipe Detail
Mortar Fillet Fall NP-1 joint sealant
Floor tiles Tile bedding 2 mm of protection layer
100mm
Barralastic Barralastic (2 coats)
Masterflow 98 to fill box-out opening in the floor pipe abraded to provide a mechanical key
