Unit I-Introduction: Unit Ii - Series Compensation Schemes Unit Iii - Unified Power Flow Control (Upfc) Unit Iv - Design of Facts Controllers Unit V - Modern Facts Devices

12EE335 FLEXIBLE AC TRANSMISSION SYSTEMS
Unit I- INTRODUCTION: Unit II- SERIES COMPENSATION SCHEMES Unit III- UNIFIED POWER FLOW CONTROL (UPFC) Unit IV- DESIGN OF FACTS CONTROLLERS Unit V- MODERN FACTS DEVICES
12EE335 FLEXIBLE AC TRANSMISSION SYSTEMS

Unit I INTRODUCTION: FACTS-a toolkit, Basic concepts of Static VAR compensator Resonance damper Thyristor controlled series capacitor Static condenser Phase angle regulator other controllers.
INTRODUCTION
Alternating current transmission systems incorporating power electronic-based and other static controllers to enhance controllability and increase power transfer capability.
INTRODUCTION
The FACTS technology is a collection of controllers, which can be applied individually or in coordination with others to control one or more of the interrelated system parameters, such as series impedance, shunt impedance, current, voltage, and damping of oscillations.
GENERATIONS:
1st Generation of FACTS (SVC & TCSC). 2nd Generation of FACTS (STATCOM & SSSC). 3rd Generation of FACTS (UPFC & IPFC).
What is the Need?
Thermal For overhead line, thermal capability is a function of ambient temperature, wind conditions, conditions of conductor, and ground clearance. The FACTS technology can help in making an effective used of newfound line capability. Dielectric Being designed very conservatively, most lines can increase operation voltage by 10% or even higher. FACTS technology could be used to ensure acceptable overvoltage and power flow conditions. Stability The stability issues that limit the transmission capability include: transient stability, dynamic stability, steady-state stability, frequency collapse. Voltage collapse, and sub-synchronous resonance. The FACTS technology can certainly be used to overcome any of the stability limits.
LIMITATIONS OF LARGE AC SYSTEMS
(LONG DISTANCE TRANSMISSION SYSTEMS)

Voltage stability Reactive power problems Steady state stability Transient Stability
(INTERCONNECTED SYSTEMS)
Load Flow Problems (needs management of Congestion) Voltage Stability Frequency Control Oscillation Stability Inter-Area Oscillations
ADVANTAGES of FACTS

Increase of Power Transfer without adding new transmission lines. Provide dynamic reactive power support and voltage control. Transmission Cost minimization. Steady state and dynamic voltage control. Improvement of System Stability and Voltage quality. Control real and reactive power flow. Active damping of Oscillations.
Flow of power in an AC system

Power flow in parallel path
Power flow in meshed system
BASIC TYPE OF FACTS CONTROLLERS
Series controllers:
The series controller could be a variable impedance or a variable source both are power electronics based. In principle, all series controllers inject voltage in series with the line.
Shunt controllers:
The shunt controllers may be variable impedance connected to the line voltage causes a variable current flow hence represents injection of current into the line.
Combined series-series controllers:
The combination could be separate series controllers or unified seriesseries controller--- Interline Power Flow Controller.
Combined series-shunt controllers:
The combination could be separated series and shunt controllers or a unified power flow controller.
BASIC TYPE OF FACTS CONTROLLERS
SERIES COMPENSATION
STATIC SYNCHRONOUS SERIES COMPENSATOR (SSSC)
Allows rapid and continuous changes in the transmission line impedance so that the active power flow along the compensated transmission line can be controlled within a specified range .
Its output voltage is in series with the line, thus, it controls voltage across the line. Used for

Damping Oscillations. Voltage Stability Improvement.
STATIC SYNCHRONOUS SERIES COMPENSATOR (SSSC)
THYRISTOR CONTROLLED SERIES COMPENSATION(TCSC)
Series Capacitor banks installations protected by thyristors. BENEFITS

Increased Power Transfer Capability. Improved Transient Stability. Lower Transmission Losses. Improved Grid voltage control.
OTHER APPLICATIONS

Power Oscillation Damping. Sub-synchronous Resonance Mitigation. Transient Stability Mitigation.
THYRISTOR CONTROLLED SERIES COMPENSATION(TCSC)
COMPARISON
PARALLEL COMPENATION STATIC VAR COMPENSATOR(SVC)
Consists of fixed capacitor banks in parallel with reactor bank. BENEFITS

Increased Power Transfer Capability. Improved Grid Voltage Control. Improved Power Factor.
OTHER APPLICTIONS

Power Oscillation Damping. Power Quality (Flicker Mitigation, Voltage Balancing).
STATIC VAR COMPENSATOR(SVC)
STATIC VAR COMPENSATOR(SVC)
STATCOM-STATIC COMPENSATOR
Same as SVC but its capacitive or inductive o/p current can be controlled independent of system voltage. It can be based on Voltage sourced or Current sourced Converter. When inverter fundamental o/p voltage is higher than the system line voltage, then STATCON acts as a capacitor and reactive VARS are generated. Otherwise, It acts as inductor and absorbs reactive VARS from the system. Can be designed to be an Active Filter to absorb System harmonics.
BENEFITS
Increased Power Transfer Capability. Improved Grid Voltage Stability. Improved Power Factor. Eliminated Flicker. Harmonic Filtering.
OTHER APPLICATIONS
Power Quality ( Flicker Mitigation & Voltage Balancing).
COMPARISON
UNIFIED POWER FLOW CONTROLLER (UPFC)
UNIFIED POWER FLOW CONTROLLER
It is a Combined Series-Shunt Controller. STATCOM and SSSC used for shunt and series compensation respectively. BENEFITS Increases Transmission line capacity (by installing a series capacitor which reduces the net series impedance) . Power System Oscillation Damping. Control of active and reactive power flow at both sending- and receiving-end.
UNIFIED POWER FLOW CONTROLLER-OPERATION
UNIFIED POWER FLOW CONTROLLER-OPERATION

Reactive power is generated or absorbed by the shunt inverter to control bus voltage. Reactive power is generated or absorbed by the series inverter to control the real and/or reactive power flow on the transmission line. A portion of the real power flow on the transmission line is drawn from the bus by the shunt inverter to charge the DC capacitor. Real power is inserted into the line through the series inverter.
SCCL (Short Circuit Current Limitation) WITH FACTS.
REASONS OF SHORT CIRCUIT CURRENT
Increasing Generation in high load density networks. Interconnection between systems.
If the short-circuit current rating of the equipment in the system is exceeded, the equipment must be either upgraded or replaced, both are either very cost- or time-intensive. Previously,Current Limitation by using reactor was done but it reduces system stability.
SCCL (Short Circuit Current Limitation) WITH FACTS.
This new device operates with zero impedance in steady-state conditions and in case of a short circuit, it is switched to the limiting-reactor impedance within a few milliseconds. Uses a reactor along with TPSC (Thyristor Protected Series Compensator).
HVDC and FACTS
HVDC
FACTS
Economically transmit electrical energy long distances via overhead lines or cable.
Connects asynchronous grids or grids with different frequencies.
Offers low-cost power delivery with the same advantages as HVDC.

Increases Capacity of existing electrical Transmission System. Rapidly Implemented Installations.
Costly equipments used and takes time-not so widespread.

Unit I-Introduction: Unit Ii - Series Compensation Schemes Unit Iii - Unified Power Flow Control (Upfc) Unit Iv - Design of Facts Controllers Unit V - Modern Facts Devices

Uploaded by

Copyright:

Available Formats

Unit I-Introduction: Unit Ii - Series Compensation Schemes Unit Iii - Unified Power Flow Control (Upfc) Unit Iv - Design of Facts Controllers Unit V - Modern Facts Devices

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Unit I-Introduction: Unit Ii - Series Compensation Schemes Unit Iii - Unified Power Flow Control (Upfc) Unit Iv - Design of Facts Controllers Unit V - Modern Facts Devices

Uploaded by

Copyright:

Available Formats

12EE335 FLEXIBLE AC TRANSMISSION SYSTEMS

12EE335 FLEXIBLE AC TRANSMISSION SYSTEMS

What is the Need?

LIMITATIONS OF LARGE AC SYSTEMS

(LONG DISTANCE TRANSMISSION SYSTEMS)

Flow of power in an AC system

Power flow in meshed system

BASIC TYPE OF FACTS CONTROLLERS

Combined series-series controllers:

Combined series-shunt controllers:

BASIC TYPE OF FACTS CONTROLLERS

Damping Oscillations. Voltage Stability Improvement.

STATIC SYNCHRONOUS SERIES COMPENSATOR (SSSC)

THYRISTOR CONTROLLED SERIES COMPENSATION(TCSC)

Series Capacitor banks installations protected by thyristors. BENEFITS

Power Oscillation Damping. Sub-synchronous Resonance Mitigation. Transient Stability Mitigation.

THYRISTOR CONTROLLED SERIES COMPENSATION(TCSC)

PARALLEL COMPENATION STATIC VAR COMPENSATOR(SVC)

Consists of fixed capacitor banks in parallel with reactor bank. BENEFITS

Power Oscillation Damping. Power Quality (Flicker Mitigation, Voltage Balancing).

STATIC VAR COMPENSATOR(SVC)

STATIC VAR COMPENSATOR(SVC)

Power Quality ( Flicker Mitigation & Voltage Balancing).

UNIFIED POWER FLOW CONTROLLER (UPFC)

UNIFIED POWER FLOW CONTROLLER

UNIFIED POWER FLOW CONTROLLER-OPERATION

UNIFIED POWER FLOW CONTROLLER-OPERATION

SCCL (Short Circuit Current Limitation) WITH FACTS.

REASONS OF SHORT CIRCUIT CURRENT

Increasing Generation in high load density networks. Interconnection between systems.

SCCL (Short Circuit Current Limitation) WITH FACTS.

HVDC and FACTS

Offers low-cost power delivery with the same advantages as HVDC.

Costly equipments used and takes time-not so widespread.

You might also like