Scribd
Upload
118 views

Control Systems: M. Asim Rehmat

The document provides an overview of control systems by M. Asim Rehmat, a lecturer in computer science and engineering. It discusses what a control system is, provides examples, and outlines the typical design process which includes modeling the system mathematically, drawing schematics and block diagrams, analyzing and designing the system, and developing control algorithms. Finally, it discusses why the study of control systems is important for computer science engineers, as software is often used to control physical systems.

Uploaded by

Chinna Thambi
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
118 views

Control Systems: M. Asim Rehmat

The document provides an overview of control systems by M. Asim Rehmat, a lecturer in computer science and engineering. It discusses what a control system is, provides examples, and outlines the typical design process which includes modeling the system mathematically, drawing schematics and block diagrams, analyzing and designing the system, and developing control algorithms. Finally, it discusses why the study of control systems is important for computer science engineers, as software is often used to control physical systems.

Uploaded by

Chinna Thambi
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 38

Control Systems

By

M. Asim Rehmat
Lecturer CS&E Department, UET Lahore

Introduction
Muhammad Asim Rehmat MS Computer Science in Artificial Intelligence, UET Lahore Belongs to SIALKOT and Engaged. Got 1st prize in All Pak E-Club Project Exhibition Got 1st prize in Final Year project Evaluation Team Lead of Database section and Servers in the Development of PAK Linux at UET Got more than 8 First prizes in All Asia and All Pakistan Engineering & Software Competitions as Project Advisor Subjects I Teach are: Robotics & CNC Machines, Embedded Systems, Industrial Automation, Control Systems, Artificial Intelligence

Course Plan
2 Assignments 10 1 Quiz 10 Mid-Term 30 Final 40 Term Project 50 Viva 20 Lab Performance 20 Personal/Professional Growth

20

Course material
Lecture slides Text Book: Control Systems Engineering by Norman S. Nise, John Wiley, Asia, 4th edition, 2004. Reference Book: Electronics Circuits Fundamentals by Franco, Oxford University Press, 1997. WWW

What is a Control System?


A Control System consists of subsystems and processes (or plants) assembled to control the outputs of a process.

Typical Examples
Central Temperature Control Fluid Level maintenance systems Battery Voltage Control Human has numerous control systems built in it.

Control System another view


A Control System is an arrangement of physical components connected/related in such a manner as to command, direct or regulate itself or another system.

Human like Control

How.. Control Systems in Robotics Perspective

Autonomous planning and Exploration

Autonomous control

Industry

.Everywhere

Control systems are divided into two classes:


a) If the aim is to maintain a physical variable at some fixed value when there are disturbances, this is a regulator.
Example: speed-control system on the ac generators of power utility companies.

b) The second class is the servomechanism. This is a control system in which a physical variable is required to follow (track) some desired time function. Example: an automatic aircraft landing system, or a robot arm designed to follow a required path in space.

Advantages of a Control System Power amplification


Radar antenna positioned by the low-power rotation of a knob at the input, requires a large amount of power for its output rotation. Control system will produce the needed power amplification/power gain.

Advantages of a Control System Remote control


Rover was built to work in contaminated areas at Three Mile Island where a nuclear accident occurred in 1979.

Advantages of a Control System Convenience of input form


In a temperature control system, the input is the position on a thermostat and the output is the heat. Thus a convenient position input yields a desired thermal output.

Advantages of a Control System Compensation for disturbances


In an antenna system that points in a commanded direction, wind can force the antenna to deviate from commanded direction. The system should detect the disturbance and act accordingly.

Classical Control Systems


Liquid Level Control

Response Characteristics
Consider a control system for an elevator.
The input is a step function instructing the elevator to go to a higher floor (4). The output is a transient response plus a steadystate response and has a steady-state error.

Open-Loop Systems
An open-loop system cannot compensate for any disturbances that add to the controllers driving signal or to the process output.

Closed-Loop (Feedback Control)


A closed-loop system can compensate for disturbances by measuring the output, comparing it to the desired output, and driving the difference toward zero.

Closed-Loop (Feedback Control)

Closed-Loop (Feedback Control)


Greater accuracy than open-loop systems Transient and steady-state responses can be controlled more easily More complex and expensive than open-loop systems
Requires monitoring the plant output

Analysis and Design Objectives


Transient Response must meet certain criteria. Hard disk read write etc. Steady-State Response must meet certain criteria. The system must have Stability.
Total Response = Natural Response + Forced Response Natural response describes the way the system dissipates or gain energy. It is dependent only on the system not the input Forced response depends on the input. Natural response must go to zero leaving only the forced response or oscillate

Analysis and Design Objectives


Other Considerations
Hardware limitations Finances Robust Design

Antenna Azimuth Position Control

Design Stages for the Antenna

Step-3: Draw Schematic

Step-4: Draw Block Diagram

Mathematical Models
Model the system mathematically using physical laws.
Kirchoffs Voltage Law - The sum of voltages around a closed path is zero. Kirchoffs Current Law - The sum of currents flowing from a node is zero. Newtons Laws - The sum of forces on a body is zero (considering mass times acceleration as a force). The sum of moments on a body is zero.

The model describes the relationship between the input and the output of the dynamic system.

Step-5: Reduce the Block Diagram

Step-6: Analyze and Design

The input signal is the desired position of the antenna. Several common forms of input functions are used for test purposes

Why Control Systems for CSE?


Engineering involves the study of design and analysis of engineering systems. Engineering systems are physical systems which could be modeled mathematically (mathematical models). Many engineering or physical systems are control systems. Examples are: central heating system, auto pilot, robots, automobiles, etc. Software engineers often participate in the development of large softwares for control systems, e.g. software for the control of the space shuttle.

You might also like