Scribd
Upload
91 views

Object Sorting Poster

1) The document describes an object sorting robot that uses a microcontroller, sensors, a robotic arm, and conveyor belt to sort black and white objects. 2) The robotic arm uses photo resistors and sensors to identify an object's color on the conveyor belt and then picks and places the object in the correct location based on its color. 3) The object sorting robot is inspired by social insects and aims to be distributed, self-organized, and scalable without centralized control. It can sort objects accurately and increase production rates in factories.

Uploaded by

Chitra Oberoy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
91 views

Object Sorting Poster

1) The document describes an object sorting robot that uses a microcontroller, sensors, a robotic arm, and conveyor belt to sort black and white objects. 2) The robotic arm uses photo resistors and sensors to identify an object's color on the conveyor belt and then picks and places the object in the correct location based on its color. 3) The object sorting robot is inspired by social insects and aims to be distributed, self-organized, and scalable without centralized control. It can sort objects accurately and increase production rates in factories.

Uploaded by

Chitra Oberoy
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 1

OBJECT SORTING ROBOT

Anamika Banwari, Deepmala Singh, Leena Dongre Department of ET&T, CSIT College, Durg, (C.G.)
Introduction
Object Sorting robot lets us learn various aspects of robotic. In the simplest application it will perform the sorting of Black and White objects over conveyor. If you place Black object on the Stage it will pick the object and place it left side and if you place white object , it pick the object and place it right side.

Materials and methodology


Microcontroller Photo resistor Sensors Robotic arm DC motor Max 232 Conveyor belt

Working

230 Volts AC Power Supply 12-0-12 Step down Transformer Rectifier and Filter Circuit Conveyor belt Controller Circuit Sensing circuit Robotic Arm

Conclusion
Industrial robots can easily automate picking a part up and placing it into a new location & saved factories money. Object sorting robots not only speed up the process, which increases production rates, but they are also more accurate and do not fatigue. Object sorting robots can be reprogrammable and tooling can be interchanged to provide for multiple applications. With the advancements in technology and affordability of robots, more object sorting robotic cells are being installed for automation applications.

Preparing the PCB layout

Figure 1. Object Sorting Robot

Prepare controller circuit & sensor circuit

The color object on the conveyor moves towards sensing unit The color of the object is identified The microcontroller receives the signal from sensing unit. The Robotic arm receives the signal The gripper closes and picks the object and robotic moves to dropping point

Assemble all the circuit on PCB with robotic arm

Literature cited
BOOKS: [1] Muhammad Ali Mazidi, Microcontroller 8051 Periodicals: [1] Fang-Chang Lin, Artificial Emotional Creature for Human-Machine Interaction Systems, Nat. Taiwan Univ., Taipei May 1997 pp 2269-2274 1995 [2] Thomson Reuters, The International Journal of Robotics Research, John MHollerbach School of Computing, University of Utah, USA, vol.14 No.1, pp20-26,2002. [3]Kotth Tobias, Advanced Intelligent Mechatronics, , Mauer, Georg F. , 14-17 July 1851 1855, 2009 WEBSITE: [1] http://www.technido.com [2] http://www.actapress.com [3] http://www.scholar.sun.ac.za

Motivation
Be Object sorting robot inspired by the collective behavior of the social insects. Distributed, self-organized, and scalable as there is no centralized control or global communication. This system is appealing due to its scalability, flexibility, and robustness. Inspired by the brood sorting behavior .

Implemented Work
Brain storming - Settle on the choice of project in the 'brain storming' part. Hardware designing - The hardware design includes all the aspects of the electronic connections between other devices, like the compatibility of the voltage levels, or the required number of pins, etc... Programming & debugging - Passing to the programming & debugging phase, because programming is much more flexible than the hardware design.

Verifying the working with the colored objects moving on the conveyor belt

Check for next object No

The robotic arm moves to its ground

Color identified? Yes Robotic arm will grip the object & moves it to dropping point

Acknowledgments

I would like to pay my regards to the honorable Chairman Mr. Ajay Prakash Verma, Director Dr. Anurag Verma, and Principal Dr. Mahesh P, Dean Dr. N.T Khobragade, Head of the Department Mrs. Mangal Singh for their kind and generous support. I wish to acknowledge my profound sense of gratitude to our project guide & In charge Mr. Mangal Singh, Head Of Department, Of Electronics & Telecommunication, Chhatrapati Shivaji Institute of Technology, Durg for his remarkable guidance and support in all good and as well as disappointing moments during the entire course of project. It was a matter of great privilege to work under his guidance.

For further information


Please contact [email protected]. More information on this and related projects can be obtained at www.technido.com .

You might also like