Scribd
Upload
606 views4 pages

Config vg202

- This document contains the configuration output of a Cisco voice gateway device with IP address 10.121.35.15 - It shows the basic device information and settings, interface configurations, voice port settings, call manager configuration, SCCP settings for connecting to call managers, dial peer configuration and other settings. - The configuration enables voice and SIP services on the device and connects it to two call managers at IP addresses 10.60.52.2 and 10.60.52.3 for call control.

Uploaded by

Ruben Villafani
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
606 views4 pages

Config vg202

- This document contains the configuration output of a Cisco voice gateway device with IP address 10.121.35.15 - It shows the basic device information and settings, interface configurations, voice port settings, call manager configuration, SCCP settings for connecting to call managers, dial peer configuration and other settings. - The configuration enables voice and SIP services on the device and connects it to two call managers at IP addresses 10.60.52.2 and 10.60.52.3 for call control.

Uploaded by

Ruben Villafani
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 4

sh run Building configuration... Current configuration : 1834 bytes ! version 12.

4 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname VG202_HD_Of_Chiquian ! boot-start-marker boot-end-marker ! logging message-counter syslog logging buffered 8000 enable secret 5 $1$icSC$OI2jfRDQRJJv6fsR04s/10 enable password cisco ! no aaa new-model ! ! ip source-route ! ! ! ! ip cef no ipv6 cef ! ! stcapp ccm-group 1 stcapp ! stcapp feature access-code ! stcapp feature speed-dial ! ! ! ! ! ! voice rtp send-recv ! voice service pots ! voice service voip fax protocol t38 nse force ls-redundancy 0 hs-redundancy 0 fallback cisco ! ! ! ! ! ! ! !

! ! ! ! ! voice-card 0 ! username cisco privilege 15 password 0 cisco ! ! ! archive log config hidekeys ! ! ! ! ! interface FastEthernet0/0 no ip address duplex auto speed auto ! interface FastEthernet0/1 ip address 10.121.35.15 255.255.255.0 duplex auto speed auto ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 10.121.35.1 ! no ip http server no ip http secure-server ! snmp-server community distriluz RW ! ! control-plane ! ! ! voice-port 0/0 cptone PE timeouts initial 60 timeouts interdigit 60 timeouts ringing infinity ! voice-port 0/1 cptone PE timeouts initial 60 timeouts interdigit 60 ! ccm-manager fax protocol cisco ccm-manager music-on-hold ccm-manager config server 10.60.52.2 ccm-manager sccp local FastEthernet0/1 ccm-manager sccp ! !

sccp local FastEthernet0/1 sccp ccm 10.60.52.2 identifier 2 version 4.1 sccp ccm 10.60.52.3 identifier 1 version 4.1 sccp ! sccp ccm group 1 associate ccm 1 priority 1 associate ccm 2 priority 2 ! ! dial-peer voice 999000 pots service stcapp port 0/0 ! ! ! ! line con 0 password cisco login no modem enable line aux 0 line vty 0 4 password cisco login ! exception data-corruption buffer truncate end VG202_HD_Of_Chiquian# ? Exec commands: access-enable Create a temporary Access-List entry access-profile Apply user-profile to interface access-template Create a temporary Access-List entry archive manage archive files audio-prompt load ivr prompt auto Exec level Automation beep Blocks Extensible Exchange Protocol commands call Voice call ccm-manager Call Manager Application exec commands cd Change current directory clear Reset functions clock Manage the system clock cns CNS agents configure Enter configuration mode connect Open a terminal connection copy Copy from one file to another crypto Encryption related commands. debug Debugging functions (see also 'undebug') delete Delete a file dir List files on a filesystem disable Turn off privileged commands --More-disconnect Disconnect an existing network connection dot1x IEEE 802.1X Exec Commands enable Turn on privileged commands erase Erase a filesystem exit Exit from the EXEC file-acct File mode accounting exec command flush File mode accounting flush options format Format a filesystem

Fsck a filesystem Description of the interactive help system Run an ISDN EXEC command on an ISDN interface Lock the terminal Log in as a particular user Exit from the EXEC Create new directory Monitoring different system events Display the contents of a file Request neighbor and version information from a multicast router mstat Show statistics after multiple multicast traceroutes mtrace Trace reverse multicast path from destination to source name-connection Name an existing network connection no Disable debugging functions --More-partition Partition disk ping Send echo messages ppp Start IETF Point-to-Point Protocol (PPP) pwd Display current working directory radius radius exec commands release Release a resource reload Halt and perform a cold restart rename Rename a file renew Renew a resource resume Resume an active network connection rlogin Open an rlogin connection rmdir Remove existing directory rsh Execute a remote command send Send a message to other tty lines set Set system parameter (not config) setup Run the SETUP command facility show Show running system information slip Start Serial-line IP (SLIP) ssh Open a secure shell client connection systat Display information about terminal lines tclquit Quit Tool Command Language shell tclsafe Tool Command Language shell SAFE mode tclsh Tool Command Language shell --More-telnet Open a telnet connection terminal Set terminal line parameters test Test subsystems, memory, and interfaces traceroute Trace route to destination tunnel Open a tunnel connection undebug Disable debugging functions (see also 'debug') upgrade Upgrade commands verify Verify a file voice Voice Commands where List active connections write Write running configuration to memory, network, or terminal VG202_HD_Of_Chiquian#

fsck help isdn lock login logout mkdir monitor more mrinfo

You might also like