Scribd
Upload
164 views

G554T Local

This document summarizes the specifications of an electrical submersible dewatering pump model G-554T. The pump is portable and intended for pumping water from construction sites, trenches, mines, and other flooded areas. It has a 10HP motor, stainless steel components for corrosion resistance, and mechanical seals for the shaft. Performance curves and dimensions are provided.

Uploaded by

Amardeep Hansda
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
164 views

G554T Local

This document summarizes the specifications of an electrical submersible dewatering pump model G-554T. The pump is portable and intended for pumping water from construction sites, trenches, mines, and other flooded areas. It has a 10HP motor, stainless steel components for corrosion resistance, and mechanical seals for the shaft. Performance curves and dimensions are provided.

Uploaded by

Amardeep Hansda
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ELECTRICAL SUBMERSIBLE DEWATERING PUMP

G-554T
The pumps are portable & are intended to be used for pumping of water from: Construction sites Open sumps Trenches Tunnels Mines Shipyards & Power Station ships Water supply Public utility Flooded Cellar works Fire fighting Aquaculture

G-554T DESIGN ADVANTAGES


Stainless Steel Strainer, Shaft, Impeller, Outlet and Hardware for maximum corrosion resistance.

Built-in automatic ON/OFF/ON thermal switches protect the motor. Choice of impeller materials: 1) 316 Stainless Steel for sea water and corrosive Applications. (Optional) 2) Nitride Hardened 410 Stainless Steel for abrasive applications. (Standard)

10 HP (7.5kW) G 554T
4"(100mm) BSP or Hose (High VolumeLow Head)

Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide mechanical seals. Mechanical Seals in wholly enclosed pressure compensated oil chamber. Field adjustable Nitrile Rubber-lined Diffuser/Wear Plate Optimizes efficiency throughout the life of the pump. Optional Polyurethane Diffusers and Wear Plates are available. Equipped with Sacrificial Zinc Anodes for maximum life in a saline fluid environment. (Optional) Available in complete 316 Stainless Steel Construction with Silicon Carbide/Silicon Carbide Mechanical Seals and Viton Elastomers.

MODY PUMPS (INDIA) PVT. LTD.


F 86, ANAND NAGAR, ADDITIONAL MIDC, AMBERNATH (E), MH 421 506, INDIA. TEL.: (91 251) 2021448, (91 251) 2021449

Website: www.modypump.com Email: [email protected]

G554 07

ELECTRICAL SUBMERSIBLE DEWATERING PUMP


G-554T
10HP(7.5Kw)
MATERIALS OF CONSTRUCTION AND ENGINEERING DATA
MOTOR (DOL-START): 2-pole induction continuous rated motor with squirrel cage rotor. Stator insulation class 'H' (180C) Speed : 2850 RPM Power Rating : 10HP/7.5 Kw Full Load Current FLA: 15.5 Amps at 415 Volts Max. temperature of the pump liquid : 40C Max. start/stop per hour : 15 Bi-metallic thermal switches are embedded in the stator windings which trip the motor in the event of excessive high temperature. POWER SUPPLY 3 phase, 415V, 50Hz, AC Supply. Also available in any voltage frequency combination. BALL BEARINGS The rotor shaft is carried in two single row, deep groove ball bearings. The bearings are filled with high temperature grease-containing special Anticorrosion additive. POWER CABLE Water proof/oil proof, PVC insulated, double sheathed, copper conductor flexible cable, 20 mtrs. Length, 6 cores of size (4 core 4 sq.mm. + 2 core 1.0 sq.mm.) The cable is fitted with a strain relief grip.

MODEL
G-554T

A
700mm

PERFORMANCE CURVES

SHAFT SEAL Tandem Tungsten Carbide/Tungsten Carbide and Tungsten Carbide/Tungsten Carbide Mechanical seals wholly enclosed in a pressure compensated oil chamber. CORROSION RESISTANT Epoxy coated Aluminum Alloy Outer Casing Epoxy coated Extruded Aluminum Stator Casing Nitrile Rubber Lined Diffuser/Wear plate. Polyurethane Optional. Shaft: 431 Stainless Steel Hardware: 304 Stainless Steel Impeller: Nitride Hardened 410SS, 50-52HRC is Standard. STRAINER 304 Stainless Steel with 30mm x 10mm rectangular holes SUBMERGENCE Submergence below liquid surface min 80mm, max. 15 mtrs WEIGHTS (Approx. without cable) G 554T: 65Kg The Pump is epoxy coated with surface treatment for long life.

Due to continuous product development, specifications are subject to change without notice. G554 07

You might also like